CIESC Journal ›› 2019, Vol. 70 ›› Issue (12): 4536-4545.DOI: 10.11949/0438-1157.20190721

• Fluid dynamics and transport phenomena • Previous Articles     Next Articles

Particle motion characteristics of atomization process in impinging entrained-flow gasifier

Chen CHENG(),Zhicun XUE,Qinghua GUO,Yan GONG,Guangsuo YU()   

  1. Institute of Clean Coal Technology, East China University of Science and Technology, Shanghai 200237, China
  • Received:2019-06-25 Revised:2019-09-09 Online:2019-12-05 Published:2019-12-05
  • Contact: Guangsuo YU

撞击气流床气化炉内雾化过程中颗粒运动特性

程晨(),薛志村,郭庆华,龚岩,于广锁()   

  1. 华东理工大学洁净煤技术研究所,上海 200237
  • 通讯作者: 于广锁
  • 作者简介:程晨(1996—),女,硕士研究生,931328972@qq.com
  • 基金资助:
    国家重点研发计划项目(2017YFB0602601);国家自然科学基金项目(21676091)

Abstract:

Based on the laboratory scale of the impinging entrained-flow bed gasifier, the coal gas slurry was used as the raw material for gasification experiments. The particle information in images was identified by image post-processing algorithm and the particle tracking algorithm was used to calculate the particle trajectory. The particle size, particle velocity and particle motion angle were analyzed by statistical method. The results show that the averaged particle size of the jet flow region near the burner tip concentrates at 325-375 μm, which is larger than the original coal particles. The velocity of most particles concentrates at 1-2 m·s-1 and almost keeps constant during the movement. The motion angles of most particles do not change with time, which means the trajectories of most particles show rectilinear motion. The distribution of all particle trajectories shows a fan-shaped ray starting from the burner tip.

Key words: impinging entrained-flow gasifier, atomization process, particle trajectory, visualization technology, statistical analysis

摘要:

基于实验室规模的撞击气流床气化炉,以水煤浆为原料进行气化实验,采用高温内窥镜及工业相机组成的可视化成像系统,在操作条件下,对水煤浆雾化过程进行拍摄。运用图像处理算法来识别和检测所得图像中的颗粒信息,利用颗粒示踪算法对颗粒进行轨迹测算。对颗粒的平均粒径、速度及角度进行统计分析。结果表明,喷嘴出口射流区内平均粒径主要集中在325~375 μm,相较于原煤颗粒较大;大部分颗粒速度集中在1~2 m·s-1且运动过程中速度变化不大;大部分颗粒运动方向不随时间而变化,呈简单直线运动;颗粒轨迹呈现以喷嘴为起始点的扇形射线。

关键词: 撞击气流床气化炉, 雾化过程, 颗粒轨迹, 可视化技术, 统计分析

CLC Number: