Self-rotating and convective heat transfer performance of imbalance spiral-gear insert in tubes

doi:10.3969/j.issn.0438-1157.2013.08.019

CIESC Journal ›› 2013, Vol. 64 ›› Issue (8): 2833-2838.DOI: 10.3969/j.issn.0438-1157.2013.08.019

Previous Articles Next Articles

Self-rotating and convective heat transfer performance of imbalance spiral-gear insert in tubes

PENG Deqi¹, TIAN Qing¹, YU Tianlan^1,2, WANG Weiqiang¹, WANG Zhiqi¹, LUO Gu¹

1. School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, Hunan, China;
2. Mechanical Clean Institute, Hunan University of Technology, Zhuzhou 412008, Hunan, China

Received:2012-12-08 Revised:2013-04-08 Online:2013-08-05 Published:2013-08-05
Supported by:
supported by the Natural Science Foundation of Hunan Province(11JJ9003)and the Doctor Start-up Fund Research(10QDZ32).

管内插偏重式螺旋轮自转及对流传热特性

彭德其¹, 田清¹, 俞天兰^1,2, 王伟强¹, 王志奇¹, 罗谷¹

1. 湘潭大学机械工程学院, 湖南湘潭 411105;
2. 湖南工业大学机械清洗研究所, 湖南株洲 412008

通讯作者: 彭德其(1972- ),男,教授。
作者简介:彭德其(1972- ),男,教授。
基金资助:
湖南省自然科学基金项目(11JJ9003);博士启动基金项目(10QDZ32)。

Abstract

Abstract: Aiming at the online fouling removal problem in heat transfer tubes,the imbalance spiral-gear inserts are proposed.The self-rotation force moment of such inserts is analyzed theoretically,and the self-rotation performance is examined experimentally.The convective heat transfer characteristics are investigated through experiments in order to evaluate the effect of imbalance on heat transfer enhancement. The result shows that the spiral-gears connected clockwise and counterclockwise alternately have the greatest force moment and can spin more easily.For the heat transfer temperature difference of 7℃,the overall heat transfer coefficient of balanced spiral-gear inserts is 22.2% and 12% higher than that of spiral-wire insert and twisted-tape insert,respectively.For the heat transfer temperature difference of 15℃,the overall heat transfer coefficients of the two kinds of imbalance spiral-gear tubes are 89% and 112% greater than that of straight tubes without any inserts,and are 12% and 25% higher than that with balanced spiral-gear inserts.The flow resistance is increased correspondingly but still in an appropriate range for engineering applications.From the comprehensive performance on heat transfer rate and resistance,the imbalance spiral-gears give the best result.

Key words: spiral-gear, self-rotating characteristics, convective heat transfer, fouling removal

摘要： 针对换热管内污垢在线清洗的难题,提出了管内插偏重式螺旋轮自动防除垢技术。理论分析了螺旋轮获得的自转动力矩,并通过实验研究其自转特性;进一步对管内插偏重式螺旋轮的对流传热特性进行实验研究,对比分析偏重因素对传热强化性能的影响。结果表明:在一正一反交替连接时螺旋轮获得的自转速度最大,更有利于螺旋轮的旋转;传热温差为7℃时,管内插螺旋轮的总传热系数比内插螺旋线、内插扭带时分别提高22.2%和12%;传热温差为15℃时,内插不同偏重式螺旋轮的总传热系数与光管相比分别提高89%和112%,与内插普通螺旋轮的传热系数相比分别提高12%和25%,但相应的沿程阻力损失随之增加。考虑传热和阻力两方面因素,对上述管内插物的综合性能进行比较,结果显示内插偏重式螺旋轮的综合性能最好。

关键词: 螺旋轮, 自转特性, 对流传热, 防除垢

CLC Number:

TK124

PENG Deqi, TIAN Qing, YU Tianlan, WANG Weiqiang, WANG Zhiqi, LUO Gu. Self-rotating and convective heat transfer performance of imbalance spiral-gear insert in tubes[J]. CIESC Journal, 2013, 64(8): 2833-2838.

彭德其, 田清, 俞天兰, 王伟强, 王志奇, 罗谷. 管内插偏重式螺旋轮自转及对流传热特性[J]. 化工学报, 2013, 64(8): 2833-2838.

References 17

[1]	Eiamsaard S,Wongcharee K,Eiamsaard P,Thianpong C.Heat transfer enhancement in a tube using delta-winglet twisted tape inserts[J].Applied Thermal Engineering,2010,30:310-318
[2]	Guo Jian(郭剑),Yang Kun(杨昆),Liu Wei(刘伟).Numerical simulation of heat transfer enhancement by adding cross twisted-tape in the circular tube[J].Journal of Engineering Thermophysics(工程热物理学报),2009,30(7):1216-1218
[3]	Zhang Lin(张琳),Qian Hongwei(钱红卫),Yu Xiumin(俞秀民),Xuan Yimin(宣益民).Numerical simulation of the three dimensional fluid flow and heat transfer of heat exchanger tubes with twisted-tape insert[J].Chinese Journal of Mechanical Engineering(机械工程学报),2007,41(1):139-142
[4]	Sibel Gunes,Veysel Ozceyhan,Orhan Buyukalaca.The experimental investigation of heat transfer and pressure drop in a tube with coiled wire inserts placed separately from the tube wall[J].Applied Thermal Engineering,2010,30:1719-1725
[5]	Krueger A,Pouponnot F.Heat exchanger performance enhancement through the use of tube inserts in refineries and chemical plants-successful application:spirelf®,turbotal® and fixotal® systems//Proceedings of International Conference on Heat Exchanger Fouling and Cleaning Ⅷ-2009(Peer-reviewed).2009:399-406
[6]	Pongjet Promvonge.Thermal performance in circular tube fitted with coiled square wires[J].Energy Conversion and Management,2008,49:980-987
[7]	Sibel Gunes,Eyuphan Manay,Ercan Senyigit,Veysel Ozceyhan.A Taguchi approach for optimization of design parameters in a tube with coiled wire inserts[J].Applied Thermal Engineering,2011,31:2568-2577
[8]	Yu Xiumin(俞秀民),Yu Tianlan(俞天兰),Peng Deqi(彭德其),Jiang Shaoqing(蒋少青),Luo Jiankang(罗健康).Twisted strip with oblique teeth to efficiently remove fouling and enhance heat transfer at low flowing velocity[J].Journal of Chemical Industry and Engineering(China)(化工学报),2005,56(4):744-747
[9]	Yu Tianlan,Peng Deqi,Yu Xiumin.Research on twisted strip with asymmetric oblique teeth[J].Enhanced Heat Transfer,2004,11(4):341-346
[10]	Zhang Zhen(张帧),Ding Yumei(丁玉梅),Yan Hua(阎华),Yang Weimin(杨卫民).Heat transfer enhancement of double-pipe heat exchanger inserted with rotors[J].CIESC Journal(化工学报),2012,63(3):728-732
[11]	Wang Yangjun(王杨君),Deng Xianhe(邓先和).Investigation on flow resistance characteristics of inside tube inserted with twisted-leafs discontinuously[J].Chemical Engineering(China)(化学工程),2007,35(4):14-18
[12]	Yang Ruzhong(杨汝仲),Deng Xianhe(邓先和).Numerical simulation of flow and heat transfer inside tube with regularly spaced twisted-tapes[J].Chemical Engineering(China)(化学工程),2010,38(6):23-25
[13]	Dong Haihong(董海宏).Numerical simulation optimization of static mixers[D].Xi'an:Xi'an University of Architecture and Technology,2011
[14]	Liu Chunjiang(刘春江),Liu Hui(刘辉),Lu Hanbing(陆寒冰),Yuan Xigang(袁希钢).Heat transfer enhancement in round tube with cross over disk:experiment and simulation[J].Journal of Chemical Industry and Engineering (China)(化工学报),2008,59(2):301-308
[15]	Lin Rongduan(林榕端),Lin Qingyu(林清宇),Feng Qingge(冯庆革),Shi Weijun(石卫军).Study on the miniature hydraulic turbine in the heat exchanger tube[J].Chinese Journal of Mechanical Engineering(机械工程学报),2001,37(7):41-43
[16]	Promvonge P,Eiamsa-ard S.Heat transfer behaviors in a tube with combined conical-ring and twisted-tape insert[J].International Communications in Heat and Mass Transfer,2007,34:849-859
[17]	Tan Xianghui(谭祥辉),Sun He(孙赫),Zhang Lizhen(张立振),Zhu Dongsheng(朱冬生).Shell side heat transfer enhancement in twisted elliptical tube heat exchanger[J].CIESC Journal(化工学报),2012,63(3):713-720

Self-rotating and convective heat transfer performance of imbalance spiral-gear insert in tubes

管内插偏重式螺旋轮自转及对流传热特性

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References 17

Related Articles 14

Recommended Articles

Metrics

Comments

[1]	Houju PEI, Yanlong JIANG, Hong SHI, Yonglong CUI, Changdong CHEN, Xiaohui QIAN. Forced convective heat transfer around spherical aerostat based on M-L transition model [J]. CIESC Journal, 2020, 71(S1): 136-141.
[2]	XU Wenjie, LI Minxia, GUO Qiang. Effect of lubricating oil on convective heat transfer characteristics of supercritical carbon dioxide [J]. CIESC Journal, 2018, 69(5): 1982-1988.
[3]	ZHU Ye, GUAN Ning, LI Dong, ZHAO Xiaobao, LIU Zhigang. Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes [J]. CIESC Journal, 2017, 68(1): 63-71.
[4]	LIU Shanwei, WU Yuting, CUI Wujun, XIONG Yaxuan, CHEN Xia, LU Yuanwei, MA Chongfang. Forced convection heat transfer with low-melting point molten salt in circular pipe [J]. CIESC Journal, 2015, 66(2): 530-536.
[5]	LU Xiaoping, YU Shurong, YU Jianping, HE Ailing, GUO Dandan. Energy transfer conversion mechanism and minimum entropy generation principle for convective heat transfer enhancement [J]. CIESC Journal, 2014, 65(S1): 336-339.
[6]	SUN Bin，ZHAO Zhao. Numerical simulation on heat transfer characteristics of metal oxide- water nanofluids in an inner grooved copper tube [J]. Chemical Industry and Engineering Progree, 2014, 33(03): 563-567.
[7]	GAI Zheng, LIN Riyi, LIU Xiaojie, LI Wei, WANG Xinwei, SONG Duopei. Heat transfer and mass transfer calculation of fouling during sub-cooled flow boiling in oilfield sewage evaporator [J]. CIESC Journal, 2013, 64(S1): 41-45.
[8]	PENG Deqi, SHI Bingle, YU Tianlan, YU Tianxiang, LIU Yangping, YE Lei. Cleaning mechanism and scale prevention of reciprocating and vibrating spiral-insert [J]. CIESC Journal, 2013, 64(9): 3168-3174.
[9]	SHEN Xiangyang, ZHANG Qizi, LU Jianfeng, DING Jing, YANG Jianping. Unsteady convective heat transfer performances of molten salt in receiver tube [J]. CIESC Journal, 2012, 63(S1): 36-40.
[10]	LI Zhenxing，ZHANG Lizhi. Fluid flow and heat transfer performance in air flow across hollow fiber membrane tube bundles [J]. CIESC Journal, 2012, 63(S1): 23-27.
[11]	WEI Min1，2，WANG Limin1. Convective heat transfer of air flow in cold cabinet with two-fluid model [J]. CIESC Journal, 2012, 63(S1): 138-144.
[12]	LIU Wei. Effects of deflector structure on performance of micro-channel evaporator with parallel flow [J]. CIESC Journal, 2012, 63(3): 761-766.
[13]	LI Qunsong，YU Tianlan，XIANG Yuhua，PENG Deqi. Automatic fouling removal and heat transfer enhancement by flat strip-inserts with elliptical teeth and notches in tubes [J]. , 2008, 27(8): 1298-.
[14]	ZHANG Jintao, WANG Buxuan, PENG Xiaofeng, DU Jianhua. Study on heat transfer for falling liquid film flow with consideration of interfacial evaporation [J]. , 2001, 9(2): 145-149.