From zone model predictive control to double-layered model predictive control

doi:10.3969/j.issn.0438-1157.2013.12.031

CIESC Journal ›› 2013, Vol. 64 ›› Issue (12): 4474-4483.DOI: 10.3969/j.issn.0438-1157.2013.12.031

Previous Articles Next Articles

From zone model predictive control to double-layered model predictive control

ZOU Tao¹, WANG Dingding², PAN Hao¹, YUAN Mingzhe¹, JI Zhongwan³

1. Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, Liaoning, China;
2. College of Information Engineering, Zhejiang University of Technology, Hangzhou 310023, Zhejiang, China;
3. Lishui University, Lishui 323000, Zhejiang, China

Received:2013-08-23 Revised:2013-09-03 Online:2013-12-05 Published:2013-12-05
Supported by:
supported by the National Natural Science Foundation of China (61074059).

从区间模型预测控制到双层结构模型预测控制

邹涛¹, 王丁丁², 潘昊¹, 苑明哲¹, 季忠宛³

1. 中国科学院沈阳自动化研究所, 辽宁沈阳 110016;
2. 浙江工业大学信息工程学院, 浙江杭州 310023;
3. 丽水学院, 浙江丽水 323000

通讯作者: 邹涛
作者简介:邹涛（1975- ），男，博士，副研究员。
基金资助:
国家自然科学基金项目（61074059）；中国科学院知识创新项目（KGCX2-EW-104）；浙江省自然科学基金项目（Y12F030052）。

Abstract

Abstract: There exist two different strategies in model predictive control (MPC),i.e.,set-point control and zone control.In comparison,zone MPC is thought to be a better strategy.However,there exists an improved set-point control strategy,i.e.,double-layered MPC,which computes set points through the steady-state target calculation in the same control cycle.In this paper,from the aspect of process steady state,the principles of zone control and double-layered MPC are analyzed.We discuss the differences and similarities between the two strategies both qualitatively and quantitatively,and prove that the two strategies are consistent in a certain context.Simulation results are given to validate the conclusion.

Key words: model predictive control, zone control, steady-state optimization

摘要： 模型预测控制算法（MPC）存在设定点控制与区间控制两种策略，区间预测控制较之设定点控制在技术上具有先进性。目前，主流的预测控制软件技术均采用双层结构，即上层稳态优化计算最优设定点，下层动态控制负责动态跟踪最优设定点。从过程稳态的角度出发，分别对区间预测控制和双层结构预测控制进行了机理分析，从定性与定量两个方面比较了这两者的异同点，提出并证明了两者的一致性条件。论述了双层结构预测控制较之单层结构下的区间控制更具先进性。

关键词: 模型预测控制, 区间控制, 稳态优化

CLC Number:

TP273

ZOU Tao, WANG Dingding, PAN Hao, YUAN Mingzhe, JI Zhongwan. From zone model predictive control to double-layered model predictive control[J]. CIESC Journal, 2013, 64(12): 4474-4483.

邹涛, 王丁丁, 潘昊, 苑明哲, 季忠宛. 从区间模型预测控制到双层结构模型预测控制[J]. 化工学报, 2013, 64(12): 4474-4483.

References 20

[1]	Morari M, Lee H J.Model predictive control:past, present and future[J].Computers & Chemical Engineering, 1999, 23 (4/5):667-682
[2]	Garcí a C E, Prett D M, Morari M.Model predictive control:theory and practice—a survey[J].Automatica, 1989, 25 (3):335-348
[3]	Xi Yugeng (席裕庚).Model Predictive Control (预测控制)[M].Beijing:National Defense Industry Press, 1993
[4]	Qian Jixin (钱积新), Zhao Jun (赵均), Xu Zuhua (徐祖华).Predictive Control (预测控制)[M].Beijing:Chemical Industry Press, 2007
[5]	Culter C R, Ramaker B L.Dynamic matrix control—a computer control algorithm//AIChE National Meeting[C].Houston, TX, 1979
[6]	Neshasteriz A R, Khaki Sedigh A, Sadjadian H. Generalized predictive control and tuning of industrial processes with second order plus dead time models[J].Journal of Process Control, 2010, 20 (1):63-72
[7]	Richalet J, Rault A, Testud J L, Papon J.Model predictive heuristic control:application to industrial process[J].Automatica, 1978, 14:413-428
[8]	Xi Yugeng (席裕庚).Satisfactory control of complex industrial process[J].Information and Control (信息与控制), 1995, 24 (1):14-20
[9]	Ferramosca A, Limon D, Gonzá lez A H, Odloak D, Camacho E F.MPC for tracking zone regions[J].Journal of Process Control, 2010, 20 (4):506-516
[10]	Gonzá lez A H, Odloak D.A stable MPC with zone control[J].Journal of Process Control, 2009, 19 (1):110-122
[11]	Lu J Z.Challenging control problems and emerging technologies in enterprise optimization[J].Control Engineering Practice, 2003, 11 (8):847-858
[12]	Rao C V, Rawings J B.Steady states and constraints in model predictive control[J].AIChE J., 1999, 45 (6):1266-1278
[13]	Kassmann D E, Badgwell T A, Hawkins R B.Robust steady-state target calculation for model predictive control[J].AIChE J., 2000, 46 (5):1007-1024
[14]	Ying C M, Joseph B.Performance and stability analysis of LP-MPC and QP-MPC cascade control systems[J].AIChE J., 1999, 45 (7):1521-1533
[15]	Nikanrov A, Swartz C L E.Sensitivity analysis of LP-MPC cascade control systems[J].Journal of Process Control, 2009, 19 (1):16-24
[16]	Muske K R.Steady-state target optimization in linear model predictive control//American Control Conference[C].Albuquerque, NM, 1997
[17]	Young R E.Petroleum refining process control and real-time optimization[J].Control Systems, 2006, 26 (6):73-83
[18]	Zou Tao (邹涛), Ding Baocang (丁宝苍), Zhang Duan (张端).MPC:An Introduction to Industrial Applications (模型预测控制工程应用导论)[M].Beijing:Chemical Industry Press, 2010
[19]	Qin S J, Badgwell A.A survey of industrial model predictive control technology[J].Control Engineering Practice, 2003, 7 (11):733-764
[20]	Zou Tao (邹涛), Li Haiqiang (李海强), Ding Baocang (丁宝苍), Wang Dingding (王丁丁).Compatibility and uniqueness analysis of steady state solution for multi-variable predictive control system[J].Acta Automatica Sinica (自动化学报), 2013, 39 (5):519-529

From zone model predictive control to double-layered model predictive control

从区间模型预测控制到双层结构模型预测控制

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References 20

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Siqi FENG, Xionglin LUO. Online estimation of switching time for a class of optimization-control mode switch of economic model predictive control [J]. CIESC Journal, 2020, 71(S2): 225-240.
[2]	Hongbiao ZHOU, Yu ZHANG, Xiaoying BAI, Baolian LIU, Huanyu ZHAO. Model predictive control of nonlinear system based on adaptive fuzzy neural network [J]. CIESC Journal, 2020, 71(7): 3201-3212.
[3]	Hongwei GUAN, Lingjian YE, Feifan SHEN, De GU, Zhihuan SONG. Dynamic real-time optimization for gold cyanidation leaching process using economic model predictive control [J]. CIESC Journal, 2020, 71(3): 1122-1130.
[4]	Defeng HE, Yongda ZHANG, Lianming LI, Xiang QIU. Lexicographic economic predictive control without terminal constraints for CFBB combustion systems [J]. CIESC Journal, 2020, 71(3): 1210-1216.
[5]	Dejian LI, Haoran LIU, Bin LIU, Zeren LIU, Weitao WANG, Yan WEN. Predictive control of free calcium oxide based on improved echo state network [J]. CIESC Journal, 2019, 70(12): 4749-4759.
[6]	LU Rongxiu, HE Lijuan, YANG Hui, ZHANG Guoqing. Component content control with zone control for rare earth extraction process [J]. CIESC Journal, 2017, 68(3): 1058-1064.
[7]	ZHANG Jia, LUO Xionglin, XU Feng, XU Jun. Influence of feed forward variables on feasible region of model predictive control [J]. CIESC Journal, 2016, 67(9): 3776-3783.
[8]	LI Qiumei, TIAN Xuemin, SHANG Linyuan. Detection of model-plant mismatch based on partial correlation analysis of MPC controllers [J]. CIESC Journal, 2016, 67(3): 852-857.
[9]	WANG Yuhong, YANG Pu. Application of a control strategy based on PWA model in CSTR system [J]. CIESC Journal, 2016, 67(3): 865-870.
[10]	PANG Qiang, ZOU Tao, CONG Qiumei. Adaptive MPC method of VCM distillation process by acetylene method based on RELS [J]. CIESC Journal, 2015, 66(2): 662-668.
[11]	FENG Kai, LU Jiangang, CHEN Jinshui. Identification and model predictive control of LPV models based on LS-SVM for MIMO system [J]. CIESC Journal, 2015, 66(1): 197-205.
[12]	SHANG Linyuan, TIAN Xuemin. Performance diagnosis of MPC control loop based on weighted L₂-Hausdorff subspace distance [J]. CIESC Journal, 2014, 65(11): 4477-4483.
[13]	LUO Xionglin, YU Yang, XU Jun. Online optimization implementation on model predictive control in chemical process [J]. CIESC Journal, 2014, 65(10): 3984-3992.
[14]	LIU Xin，HAO Xiaohong，YANG Xinhua，AN Aimin. Nonlinear model predictive control of the direct internal reforming solid oxide fuel cell system [J]. Chemical Industry and Engineering Progree, 2014, 33(04): 900-906.
[15]	PANG Qiang, ZOU Tao, CONG Qiumei, LI Yongmin. Multi-model switching based on Gaussian mixture model and principal component analysis [J]. CIESC Journal, 2013, 64(8): 2938-2946.