[1] |
WANG Menghan, TU Shunli, YU Chunli.
Optimization strategy of weld line assisted by air traps improvement based on Kriging and NSGA-Ⅱ
[J]. CIESC Journal, 2018, 69(10): 4449-4455.
|
[2] |
JIANG Ben, ZHAI Ming, REN Jianxing, MA Shiheng, SHEN Changyu.
Simulation of fiber erosion on mold during filling process of fiber reinforced plastic injection molding
[J]. CIESC Journal, 2018, 69(7): 3174-3180.
|
[3] |
JIANG Jing, HOU Jianhua, WANG Shiwei, WANG Xiaofeng, SUN Shuhao, ZHANG Kangkang, LI Qian.
Distribution of residual stress in ICM polycarbonate parts with variable curvature
[J]. CIESC Journal, 2017, 68(11): 4367-4375.
|
[4] |
ZHOU Guofa, YANG Peimin, LUO Zhi, JIANG Xiannian.
Numerical simulation on in-mold micro assembly molding process based on viscoelastic thermal fluid structure coupling
[J]. CIESC Journal, 2017, 68(3): 1129-1137.
|
[5] |
WANG Menghan, LIU Xiao, WEI Kang, LI Yanzhao.
Strategy of molding shrinkage control for Bi-layered RHCM based on Kriging and GA
[J]. CIESC Journal, 2017, 68(1): 391-397.
|
[6] |
WANG Xinyu, LI Zheng, GU Junfeng, RUAN Shilun, SHEN Changyu, WANG Xicheng.
Service stress optimization of injection-molded engineering plastic product
[J]. CIESC Journal, 2016, 67(7): 3040-3046.
|
[7] |
WANG Jiajia, WANG Lixia, BIAN Ning, WANG Dongfang, WANG Yongzhen, ZHANG Yang, LI Qian, SHEN Changyu.
Influence of shear history on morphology, microstructure and mechanical properties of micro injection molded parts
[J]. CIESC Journal, 2015, 66(5): 1931-1938.
|
[8] |
ZHAO Junfeng, HUANG Hanxiong.
Phase morphology and barrier performance of water-assisted injection-molded PP/EVOH blend parts
[J]. CIESC Journal, 2015, 66(5): 1964-1969.
|
[9] |
REN Zhong, HUANG Xingyuan, LIU Hesheng, DENG Xiaozhen, HE Jiantao.
Non-isothermal viscoelastic numerical analysis of compressible gas-assisted polymer extrusion molding
[J]. CIESC Journal, 2015, 66(4): 1615-1623.
|
[10] |
WANG Menghan, LI Yanzhao, XIA Zhizi, CHEN Mingliang, YANG Hai.
Processing parameters optimization of rapid heat cycle molding based on Kriging meta-model and genetic algorithm
[J]. CIESC Journal, 2014, 65(12): 5054-5060.
|
[11] |
YU Tongmin, WU Yongqiang, HUANG Xiaochao.
Effects of ultrasonic field on filling quality for micro-column arrays parts
[J]. CIESC Journal, 2014, 65(12): 5023-5029.
|
[12] |
ZHAO Yongqing, CHEN Fuquan, FENG Yanhong, QU Jinping.
Properties of poly(lactic acid)/epoxidized soybean oil blends
[J]. CIESC Journal, 2014, 65(10): 4197-4202.
|
[13] |
WANG Menghan, YANG Hai, LI Yanzhao, ZHOU Jie, Huang Qianglin, YAO Xiaobing.
Elimination of voids in crankshaft through a hybrid of back propagation neural network and genetic algorithm
[J]. CIESC Journal, 2013, 64(10): 3673-3678.
|
[14] |
WEN Yan, OUYANG Jie, ZHOU Wen.
3D simulation of filling process for short fiber reinforced melts and prediction of composite properties
[J]. CIESC Journal, 2013, 64(9): 3102-3109.
|
[15] |
ZHANG Qinxing, LI Qian, DONG Zikai, JIANG Jing, WANG Lixia, SHEN Changyu.
Filling behavior of iPP micro-array structure product by micro injection molding
[J]. CIESC Journal, 2013, 64(8): 3045-3053.
|