[1] Hills, J. H., Darton, R. C., "The rising velocity of a large bubble in a bubble swarm", Trans. Inst. Chem. Engrs.,54, 258 (1976). [2] Kuo, J. C. W., "Slurry Fischer-Tropsch/mobil two stage process of converting syngas to high octane gasoline", DOE Report Contract, No. AC22-22-80PC 30022 (1983). [3] Vermeer, D. J., Krishna, R., "Hydrodynamics and mass transfer in bubble columns operating in the churnTurbulent regime", Ind. Eng. Chem. Process Des. Dev.,20 (3), 475-482 (1981). [4] Koelbel, H, Ralek, M,. "The Fischer-Tropsch synthesis in the liquid phase", Catal. Rev. Sci. Eng., 21 (2), 225-274(1980). [5] Peter, S., Weinert, M., "Solubility of hydrogen, carbon monoxide, carbon dioxide, and water vapor in liquid hydrocarbons", Z. Physik. Chem. [N. F.], 5, 114-121 (1955). [6] Peter, S., Weinert, M., "Diffusion velocity of hydrogen in hydrocarbons at high pressure", Z. Physik. Chem. [N. F.],9, 49-61 (1955). [7] Zaidi,A., Louisi, Y., Ralek, H., Deckwer, W. D., "Determination of mass transfer numbers for the liquid-phase Fischer-Tropsch synthesis", Ger. Chem. Eng., 2 (2), 94(1979). [8] Hayduk, W., Cheng, S. C., "Review of relation between diffusivity and solvent viscosity in dilute liquid solutions",Chem. Eng. Sci., 26 (5), 635-646 (1971). [9] Wilkinson, P. M., "Physical aspects and scale-up of high pressure bubble columns", Ph. D. Thesis, Department of Chemical Engineering University of Groningen, Groningen,The Netherlands (1991). [10] Deckwer, W. D., Serpemen, Y., Ralek, M., Schmidt,B., "Modeling the Fischer-Tropsch synthesis in the slurry phase", Ind. Eng. Chem. Process Des. Dev., 21 (2), 231-241 (1982). [11] Finlayson, B. A., The Method of Weighted Residuals and Variational Principles", Academic Press, New York, (1972). [12] Tadaki, T., Maeda, S., "The size of bubbles from single orifices", Kagaku Kogaku, 27 (3), 147-155 (1963). (in Japanese) [13] Tadaki, T., Maeda, S., "The size of bubbles from perforated plates", Kagaku Kogaku, 27 (6), 402-406 (1963).(in Japanese) [14] Shah, Y. T., Kelkar, B. G., Godbole, S. P., Deckwer, W.D., "Design parameters estimations for bubble column reactors", AIChE J., 28 (3), 353-379 (1982). [15] Kuo, J. C. W., "Two-stage process for conversion of synthesis gas to high quality transportation fules", DOE Final Report Contract, No. DE-AC22-83 PC 60019 (1985). |