CIESC Journal ›› 2017, Vol. 68 ›› Issue (12): 4556-4564.DOI: 10.11949/j.issn.0438-1157.20170632

Previous Articles     Next Articles

Solid-liquid suspension behavior intensified by punched rigid-flexible impeller

GU Deyin1, LIU Zuohua1, QIU Facheng1, XU Chuanlin1, XIE Zhaoming1, LI Jun1, TAO Changyuan1, WANG Yundong2   

  1. 1 School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China;
    2 Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
  • Received:2017-05-16 Revised:2017-06-17 Online:2017-12-05 Published:2017-12-05
  • Supported by:

    supported by the National Natural Science Foundation of China (21576033, 21636004), the Fundamental Research Funds for the Central Universities (106112017CDJQJ228808) and the Chongqing Special Social Undertakings and People's Livelihood Security Science and Technology Innovation (cstc2015shmszx100024).

穿流-刚柔组合桨强化固液两相的悬浮行为

谷德银1, 刘作华1, 邱发成1, 许传林1, 谢昭明1, 李军1, 陶长元1, 王运东2   

  1. 1 重庆大学化学化工学院, 重庆 400044;
    2 清华大学化学工程系, 北京 100084
  • 通讯作者: 刘作华
  • 基金资助:

    国家自然科学基金项目(21576033,21636004);中央高校基本科研业务费专项资金(106112017CDJQJ228808);重庆市社会事业与民生保障科技创新专项(cstc2015shmszx100024)。

Abstract:

The total deformation and equivalent stress of impeller, and hydrodynamics of solid-liquid suspension process in a stirred tank with RDT-PBDT, R-RDT-PBDT, RF-RDT-PBDT, PR-RDT-PBDT and PRF-RDT-PBDT were investigated using bidirectional fluid-structure interaction (FSI) method. Results showed that, at the same power consumption, the total deformation of PRF-RDT-PBDT was 1.984×106, 1.247×103, 1.169, 1.041×103 times of RDT-PBDT, R-RDT-PBDT, RF-RDT-PBDT and PR-RDT-PBDT, respectively. The equivalent stress of PRF-RDT-PBDT was larger than that of RDT-PBDT, R-RDT-PBDT and RF-RDT-PBDT, and was more homogeneous than that of PR-RDT-PBDT. The maximum Uz/Utip value of solid particle and maximum ε/D2N3 value in PRF-RDT-PBDT system were 53.08% and 80.84%,38.03% and 28.42%,22.14% and 20.16%,10.85% and 5.725%, which are higher compared with RDT-PBDT, R-RDT-PBDT, RF-RDT-PBDT, PR-RDT-PBDT, respectively. Therefore, PRF-RDT-PBDT can enhance mutual coupling effect with fluid, increase axial velocity of solid particles and turbulent energy dissipation rate, reduce the accumulation of solid particles at the bottom of stirring tank, and improve the solid-liquid mixing performance.

Key words: fluid-structure interaction, stirring, PRF-RDT-PBDT, solid-liquid two-phase, suspension

摘要:

采用双向流固耦合计算方法对搅拌槽内刚性桨(RDT-PBDT)、刚性组合桨(R-RDT-PBDT)、刚柔组合桨(RF-RDT-PBDT)、穿流-刚性组合桨(PR-RDT-PBDT)以及穿流-刚柔组合桨(PRF-RDT-PBDT)体系中的固液两相悬浮特性和桨叶总变形量、等效应力进行了研究。结果表明,在相同功耗下,PRF-RDT-PBDT的最大变形量分别是RDT-PBDT、R-RDT-PBDT、RF-RDT-PBDT、PR-RDT-PBDT的1.984×106倍、1.247×103倍、1.169倍、1.041×103倍。PRF-RDT-PBDT的应力大于RDT-PBDT、R-RDT-PBDT、RF-RDT-PBDT的,比PR-RDT-PBDT的应力分布更均匀。PRF-RDT-PBDT体系的固体颗粒最大Uz/Utip值和最大ε/D2N3值分别比RDT-PBDT、R-RDT-PBDT、RF-RDT-PBDT和PR-RDT-PBDT体系提高了53.08%和80.84%,38.03%和28.42%,22.14%和20.16%,10.85%和5.725%。PRF-RDT-PBDT能够增大与流体之间的相互耦合作用,增大固体颗粒的轴向速度,提高体系的湍动能耗散率,减小搅拌槽底部固体颗粒的堆积程度,提高固体颗粒的悬浮程度。

关键词: 流固耦合, 搅拌, PRF-RDT-PBDT, 固液两相, 悬浮

CLC Number: