CIESC Journal ›› 2017, Vol. 68 ›› Issue (1): 424-429.DOI: 10.11949/j.issn.0438-1157.20160418

Previous Articles     Next Articles

Effect of different ball milling processes on purity and particle size of β-tricalcium phosphate powders by solid-state synthesis

KANG Junpei1,2, GE Ting1,2, LIU Sa1,2, YANG Junzhong1,2, REN Li1,2   

  1. 1 School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China;
    2 National Engineering Research Center for Tissue Restoration and Reconstruction, South China University of Technology, Guangzhou 510006, Guangdong, China
  • Received:2016-04-05 Revised:2016-06-02 Online:2017-01-05 Published:2017-01-05
  • Contact: 10.11949/j.issn.0438-1157.20160418
  • Supported by:

    supported by the National Natural Science Foundation of China (51273072), the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (2012BAI17B02), the Science and Technology Innovation Council of Guangzhou (201508020123) and the Natural Science Foundation of Guangdong Province (2016A030313509).

不同球磨粉碎工艺对固相合成β-磷酸三钙纯度和粒度的影响

康军沛1,2, 葛婷1,2, 刘卅1,2, 杨军忠1,2, 任力1,2   

  1. 1 华南理工大学材料科学与工程学院, 广东 广州 510640;
    2 华南理工大学国家人体组织功能重建技术研究中心, 广东 广州 510006
  • 通讯作者: 任力
  • 基金资助:

    国家自然科学基金项目(51273072);十二五国家科技支撑计划项目(2012BAI17B02);广州市科技计划项目(201508020123);广东省自然科学基金项目(2016A030313509)。

Abstract:

β-Tricalcium phosphate powders were prepared by nano ball milling and ultrasonic stirring process and compared with conventional process in this research.The purity and particle size of β-TCP powders were investigated by differential scanning calorimetry(DSC), X-ray diffraction(XRD), Fourier transform infrared spectroscope(FTIR), nanoparticle test, scanning electronic microscopy(SEM), transmission electron microscope(TEM) and X-ray fluorescence spectrum(XRF).The results reveal that the purity of β-TCP powders prepared by the nano ball milling and ultrasonic stirring process can reach over 97%, and the powders average particle size is 666 nm, with high purity and uniform particle size.Moreover, the raw materials with small particle size and good dispersion can be processed through nano ball milling.This process has great potential in the synthesis of inorganic powders by solid-state synthesis.

Key words: nano ball milling, ultrasonic stirring, solid-state, synthesis, powder technology, size distribution

摘要:

采用纳米球磨-超声搅拌工艺制备了β-磷酸三钙粉体,并与传统固相合成工艺进行了对比研究。采用差示扫描量热(DSC)、X射线衍射(XRD)、红外(FTIR)、纳米粒度测试、扫描电镜(SEM)、透射电镜(TEM)及X射线荧光光谱(XRF)等手段对两种工艺所制备粉体进行了纯度和粒度表征。结果表明:相比传统工艺,经过纳米球磨-超声搅拌工艺制备出的β-TCP粉体纯度可达97%以上,平均粒径为666 nm。粉体的纯度高、粒径分布更均匀。同时,纳米球磨加工后的原料平均粒度更小,分散性更好。该工艺有望用于粉体材料的固相合成。

关键词: 纳米球磨, 超声搅拌, 固相, 合成, 粉体技术, 粒度分布

CLC Number: