CIESC Journal ›› 2019, Vol. 70 ›› Issue (6): 2182-2191.DOI: 10.11949/0438-1157.20190021

• Catalysis, kinetics and reactors • Previous Articles     Next Articles

Catalytic performance of Zn/NaHZSM-5 zeolite for C5-C8 chain-alkanes aromatization

Yun ZHAO(),Chunyan LIU,Jiaxu LIU,Ning HE,Hongchen GUO()   

  1. State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116023, Liaoning, China
  • Received:2019-01-09 Revised:2019-03-21 Online:2019-06-05 Published:2019-06-05
  • Contact: Hongchen GUO

Zn/NaHZSM-5沸石在C5~C8链烷烃芳构化反应中的催化性能

赵云(),刘春燕,刘家旭,贺宁,郭洪臣()   

  1. 大连理工大学化工学院,精细化工国家重点实验室,辽宁 大连 116023
  • 通讯作者: 郭洪臣
  • 作者简介:<named-content content-type="corresp-name">赵云</named-content>(1983—),男,博士研究生,<email>zhyun119@163.com</email>
  • 基金资助:
    国家自然科学基金项目(21603023)

Abstract:

Ammonia gas temperature programmed desorption (NH3-TPD), UV-visible spectroscopy and small fixed-bed reactor were used to study the surface acidity of nano-H-ZSM-5 zeolite modified by alkali metal sodium ion and transition metal zinc ion. The results showed that alkali metal ion Na+ modification can effectively eliminate the strong acid sites and reduce the acid amount of the zeolite, which consequently optimized the products distribution of aromatization process by suppressing the production of low-value by-products like methane, ethane or propane. The optimum Zn loading for aromatics production was 3% (mass), while further increasing Zn loadings resulted in high yield of dry gas. The suitable reaction temperature for C5-C8 alkanes aromatization was 530℃.

Key words: chain-alkanes, aromatization, nano-sized H-ZSM-5, acidity, alkali metal ion modification

摘要:

采用氨气程序升温脱附(NH3-TPD)、紫外-可见光谱和小型固定床反应器,重点研究了碱金属钠离子和过渡金属锌离子改性对纳米H-ZSM-5沸石表面酸性及其催化C5~C8链烷烃芳构化反应性能的影响。结果表明,用碱金属钠离子改性能够有效地消除沸石表面的强酸中心,适当降低催化剂表面酸量,从而减少甲烷、乙烷和丙烷等低值副产物的生成,优化芳构化反应产物分布。适宜的Zn2+负载量为3%(质量分数),过高的Zn2+负载量会使产物中干气生成量增大,不利于芳烃收率的提高。C5~C8链烷烃芳构化的适宜反应温度为530℃。

关键词: 链烷烃, 芳构化, 纳米H-ZSM-5, 酸性, 碱金属离子改性

CLC Number: