TiO2载体特性对二苯并噻吩加氢脱硫性能的影响

doi:10.3969/j.issn.0438-1157.2013.07.021

化工学报 ›› 2013, Vol. 64 ›› Issue (7): 2462-2467.DOI: 10.3969/j.issn.0438-1157.2013.07.021

• 催化、动力学与反应器 • 上一篇下一篇

TiO₂载体特性对二苯并噻吩加氢脱硫性能的影响

汪怀远^1,2, 朱友庄¹, 赵景岩¹, 程小双¹, 张志华²

1. 东北石油大学化学化工学院, 黑龙江大庆 163318;
2. 大庆化工研究中心, 黑龙江大庆 163318

收稿日期:2012-11-29 修回日期:2013-04-19 出版日期:2013-07-05 发布日期:2013-07-05
通讯作者: 汪怀远(1977- ),男,博士,教授
作者简介:汪怀远(1977- ),男,博士,教授。
基金资助:
国家自然科学基金项目(50903010,51175066);黑龙江省博后基金项目(bh2010431);中国石油天然气有限公司石油化工研究院开发项目(201012xx)。

Effect of characteristics of TiO₂ carrier on performance of dibenzothiophene hydrodesulfurization

WANG Huaiyuan^1,2, ZHU Youzhuang¹, ZHAO Jingyan¹, CHENG Xiaoshuang¹, ZHANG Zhihua²

1. School of Chemistry & Chemical Engineering, Northeast Petroleum University, Daqing 163318, Heilongjiang, China;
2. Daqing Chemical Industry Research Center, PetroChina, Daqing 163318, Heilongjiang, China

Received:2012-11-29 Revised:2013-04-19 Online:2013-07-05 Published:2013-07-05
Supported by:
supported by the National Natural Science Foundation of China (50903010,51175066),the Provincial Doctor Foundation (bh2010431)and the Development Projects of PetroChina Company Limited(201012xx).

摘要/Abstract

摘要： 以自制的大比表面介孔二氧化钛晶须作为加氢脱硫催化剂的载体,采用一步浸渍法制备了MoO₃-NiO/TiO₂催化剂,并用 X 射线衍射、N₂ 吸附-脱附、SEM、拉曼衍射等技术对载体和催化剂进行了表征,考察了TiO₂晶须材料作为二苯并噻吩(DBT)上加氢脱硫(HDS)催化剂载体的性能及优越性,并详细考察了不同TiO₂载体的晶型与比表面积对催化剂加氢脱硫反应活性的影响。结果表明,TiO₂介孔晶须具有较为活泼的锐钛矿相和晶须形貌,同时提供了大的比表面积和特殊的孔道结构,在温度280℃、氢分压2.0 MPa、氢/油体积比400、体积空速4 h^-1的温和条件下,DBT转化率即可接近100%。比表面积相近时,催化剂的脱硫效果依次为锐钛矿相>混晶>金红石相;同为锐钛矿相TiO₂载体,催化剂的脱硫效果随着比表面的增大而增加。

关键词: 介孔二氧化钛晶须, TiO₂载体, 加氢脱硫, 二苯并噻吩

Abstract: An attempt using self-regulating mesoporous titanium dioxide whisker as catalyst carrier of hydrogen desulfurization,was carried out to prepare MoO₃-NiO/TiO₂ catalyst by single-step incipient wetness impregnation.X-ray,N₂ absorption/desorption,SEM,Raman diffraction were adopted to characterize the carrier and catalyst.The effect of mesoporous TiO₂ whisker as catalyst carrier on the performance of dibenzothiophene (DBT)hydrogen desulfurization (HDS)was evaluated.The results showed that the mesoporous TiO₂ whisker had highly active anatase,whisker morphology and larger specific surface area as well as special pore structure.DBT conversion over mesoporous TiO₂ whisker could approach 100% under moderate conditions of reaction temperature 280℃,hydrogen partial pressure 2.0 MPa,hydrogen/oil volume ratio 400 and LHSV 4 h^-1.Under the condition of similar specific surface area,the sequence of the desulfurization effect of the tested catalysts was anatase> mixed crystals of TiO₂ >rutile.As anatase carriers are concerned,the desulfurization effect increased with the increase of the specific surface area of TiO₂ carrier.

Key words: mesoporous titania whisker, titania carrier, hydrodesulfurization, dibenzothiophene

中图分类号:

O643.3

汪怀远, 朱友庄, 赵景岩, 程小双, 张志华. TiO₂载体特性对二苯并噻吩加氢脱硫性能的影响[J]. 化工学报, 2013, 64(7): 2462-2467.

WANG Huaiyuan, ZHU Youzhuang, ZHAO Jingyan, CHENG Xiaoshuang, ZHANG Zhihua. Effect of characteristics of TiO₂ carrier on performance of dibenzothiophene hydrodesulfurization[J]. CIESC Journal, 2013, 64(7): 2462-2467.

参考文献 22

[1]	Gao Qiang,Thomas N K Ofosu,Ma Shuguo,Vasileios G Komvokis,Christopher T Williams,Koichi Segawa. Catalyst development for ultra-deep hydrodesulfurization (HDS)of dibenzothiophenes(Ⅰ):Effects of Ni promotion in molybdenum-based catalysts[J].Catalysis Today,2011,164:538-543
[2]	Charbel Roukoss,Dorothée Laurenti,Elodie Devers,Karin Marchand,Laurence Massin,Michel Vrinat. Hydrodesulfurization catalysts:promoters,promoting methods and support effect on catalytic activities comptes[J].C.R.Chimie,2009,12:683-691
[3]	Wang Haitang(王海棠),Zhu Yinhua(朱银华),Yang Zhuhong(杨祝红),Liu Jinlong(刘金龙),Sun Qingjie(孙庆杰),Lu Xiaohua(陆小华),Feng Xin(冯新).p-Nitrophenol hydrogenation over a novel Ni/TiO2 catalyst[J].Chinese Journal of Catalysis(催化学报),2009,30(5):414-420
[4]	Wang Kaile,Yang Bolun,Liu Yu,Yi Chunhai. Preparation of Ni2P/TiO2-Al2O3 and the catalytic performance for hydrodesulfurization of 3-methylthiophene[J].Energy & Fuels,2009,23(9):4209-4214
[5]	Zhu Yinhua,Li Wei,Zhou Yaxin,Lu Xiaohua,Feng Xin,Yang Zhuhong.Low-temperature CO oxidation of gold catalysts loaded on mesoporous TiO2 whisker derived from potassium dititanate[J].Catal.Lett.,2009,127:406-410
[6]	Chen Yanxin,Jiang Yi,Li Wenzhao,Jin Rongchao,Tang Shaozhen,Hu Wenbin.Adsorption and interaction of H2S/SO2 on TiO2[J].Catalysis Today,1999,50:39-47
[7]	Hang Liang(黄靓),Li Jun(李俊),Wang Jun(王军).Synthesis and characterization of TiO2 mesoporous materials[J].Chemical Industry and Engineering Progress (化工进展),2009,28(3):453-457
[8]	Dzwigaj S,Louis C,Breysse M,Cattenot M,Bellière V,Geantet C,Vrinat M,Blanchard P,Payen E,Inoue S,Kudo H,Yoshimura Y.New generation of titanium dioxide support for hydrodesulfurization[J].Applied Catalysis B:Environmental,2003,41(1):181-191
[9]	Zhang Shaojin(张绍金),Zhou Yasong(周亚松),Xu Chunming (徐春明).Physicochemical properties of TiO2-SiO2 composite oxide and their effects on diesel hydrorefining performance[J].Journal of Chemical Industry and Engineering(China)(化工学报),2006,57(4):769-774
[10]	He Ming,Lu Xiaohua,Feng Xin,Yu Lei,Yang Zhuhong. A simple approach to mesoporous fibrous titania from potassium dititanate[J].Chem.Comm.,2004(19):2203-2204
[11]	He Ming(何明),Xu Li(徐莉),Gu Xiaoli(顾晓利),Luo Zhenyang(罗振扬),Lu Xiaohua(陆小华).Preparation and mechanism study of mesoporous titania whiskers[J].Journal of Inorganic Materials (无机材料学报),2008,23(6):1236-1240
[12]	Li Wei,Liu Chang,Zhou Yaxin,Bai Yang,Feng Xin,Yang Zhuhong,Lu Linghong,Lu Xiaohua,Chan Kwong-Yu.Enhanced photocatalytic activity in anatase/TiO2 (B)core-shell nanofiber[J].The Journal of Physical Chemistry C,2008,112(51):20539-20545
[13]	Sing K S W,Everett D H,Haul R A W,Moscou L,Pierotti R A,Rouquerol J,Siemieniewska T.Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity[J].Pure & Appl.Chem.,1985,57(4):603-619
[14]	Blin J L,Otjacques C,Herrier G,Su Baolian.Pore size engineering of mesoporous silicas using decane as expander[J].Langmuir,2000,16(9):4229-4236
[15]	Stencel J M.Raman Spectroscopy for Catalysis[M].New York:Van Nostrand Reinhold,1990
[16]	Wang Danhong,Qian Weihua,Ishihara Atsushi,Kabe Toshiaki. Elucidation of sulfidation state and hydrodesulfurization mechanism on TiO2 catalysts using 35S radioisotope tracer methods[J].Applied Catalysis A:General,2002,224(1):191-199
[17]	Zuo Donghua(左东华),Xie Yuping(谢玉萍),Nie Hong(聂红),Shi Yahua(石亚华),Li Can(李灿).Study on hydrodesulfurization mechanism of 4,6-dimethyl dibenzothiophene(Ⅰ):Catalytic behavior of NiW-based catalysts[J].Chinese Journal of Catalysis(催化学报),2002,23(3):271-275
[18]	Ma Xinguo(马新国).Theoretical study of anatase TiO2 surface[D].Wuhan:Huazhong University of Science and Technology,2006
[19]	Ma Xinguo(马新国),Jiang Jianjun(江建军),Liang Pei(梁培).Theoretical study of native point defects on anatase TiO2(101)surface[J].Acta Physica Sinica(物理学报),2008,57(5):3120-3124
[20]	Song Hua(宋华),Guo Yuntao(郭云涛),Li Feng(李锋),Yu Hongkun(于洪坤).Preparation,hydrodesulfurization and hydrodenitrogenation performance of a Ni2P/TiO2-Al2O3 catalyst[J].Acta Physico-Chimica Sinica(物理化学学报),2010,26(9):2461-2467
[21]	Daage M,Chianelli R R.Structure-function relations in molybdenum sulfide catalysts:the "rim-edge" model[J].J.Catal.,1994,149:414-427
[22]	Mamun Absi-Halabi,Anthony Stanislaus,Tawfic Al-Mughni,Shuja Khan,Arjun Qamra.Hydroprocessing of vacuum residues:relation between catalyst activity,deactivation and pore size distribution[J].Fuel,1995,74:1211-1215

TiO₂载体特性对二苯并噻吩加氢脱硫性能的影响

Effect of characteristics of TiO₂ carrier on performance of dibenzothiophene hydrodesulfurization

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 22

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘晓艺, 李秀萍, 赵荣祥, 张豪. ZrO₂/SiO₂催化剂的制备及其氧化脱硫性能研究[J]. 化工学报, 2021, 72(11): 5653-5663.
[2]	孙瑞阳, 陆颖舟, 孟洪, 李春喜. 噻吩硫化物的硝化产物用于模型油中DBT的高效吸附[J]. 化工学报, 2020, 71(5): 2256-2264.
[3]	岳源源, 郑晓桂, 康颖, 白正帅, 袁珮, 朱海波, 鲍晓军. 基于镁铝水滑石的Mo/Al₂O₃-MgO催化剂制备及其加氢脱硫性能[J]. 化工学报, 2018, 69(1): 405-413.
[4]	戚春萍, 武文粉, 王晨晔, 李会泉. 燃煤电厂废旧SCR脱硝催化剂中TiO₂载体的回收与再利用[J]. 化工学报, 2017, 68(11): 4239-4248.
[5]	张伟清, 郭文光, 储丽丽, 孔令朋, 靳广洲. 钼酸铵与LaHY固相反应机理[J]. 化工学报, 2016, 67(8): 3380-3386.
[6]	张娟, 胡颜荟, 任腾杰, 李未康, 赵地顺. Ti-MCM-41负载酞菁铁光催化氧化脱硫[J]. 化工学报, 2015, 66(9): 3437-3443.
[7]	汪怀远, 肖博, 王池嘉, 程小双, 蒋凤. 静电纺丝法制备氧化钛-氧化石墨复合载体的加氢脱硫性能[J]. 化工学报, 2015, 66(7): 2514-2520.
[8]	汪怀远, 程小双, 王池嘉, 肖博, 蒋凤. 纳/微复合结构TiO₂负载催化剂的加氢脱硫性能[J]. 化工学报, 2015, 66(1): 114-120.
[9]	张娟, 任腾杰, 胡颜荟, 李俊盼, 王春芳, 赵地顺. MCM-41分子筛负载金属酞菁在氧化脱硫反应中的催化性能[J]. 化工学报, 2014, 65(8): 3012-3018.
[10]	仝建波1，2，蔺阳1，2，刘淑玲1，2，温俊涛1，2，刘瑛瑛1，2. 加氢脱硫催化剂载体的研究进展[J]. 化工进展, 2014, 33(05): 1170-1179.
[11]	黄婷婷，柴永明，商红岩，燕群，刘晨光. 络合剂对加氢精制催化剂影响的研究进展[J]. 化工进展, 2014, 33(04): 914-920.
[12]	申曙光，任云朋，张东峰，范济民，赵志军. 焦化轻油制备高辛烷值汽油调和组分[J]. 化工进展, 2014, 33(03): 623-628.
[13]	龚朝兵，赵晨曦，谢海峰. 全馏分催化汽油加氢脱硫工艺的标定与运行分析[J]. 化工进展, 2014, 33(01): 253-256.
[14]	许杰，方向晨，关明华，姚春雷. 蒽油两段加氢生产清洁燃料油技术[J]. 化工进展, 2014, 33(01): 64-69.
[15]	朱立, 周亚松, 魏强, 韩璐, 罗怡, 王靖宇. Zr改性对NiW/Al₂O₃催化剂加氢性能的影响[J]. 化工学报, 2013, 64(7): 2474-2479.