化工学报 ›› 2015, Vol. 66 ›› Issue (1): 114-120.DOI: 10.11949/j.issn.0438-1157.20141083

• 催化、动力学与反应器 • 上一篇    下一篇

纳/微复合结构TiO2负载催化剂的加氢脱硫性能

汪怀远, 程小双, 王池嘉, 肖博, 蒋凤   

  1. 东北石油大学化学化工学院, 黑龙江 大庆 163318
  • 收稿日期:2014-07-18 修回日期:2014-09-29 出版日期:2015-01-05 发布日期:2015-01-05
  • 通讯作者: 汪怀远
  • 基金资助:

    国家自然科学基金项目(51175066);黑龙江省重点实验室项目(PS13H11)。

Hydrodesulfurization performance of nano/micro-composite TiO2 supported catalysts

WANG Huaiyuan, CHENG Xiaoshuang, WANG Chijia, XIAO Bo, JIANG Feng   

  1. School of Chemistry & Chemical Engineering, Northeast Petroleum University, Daqing 163318, Heilongjiang, China
  • Received:2014-07-18 Revised:2014-09-29 Online:2015-01-05 Published:2015-01-05
  • Supported by:

    supported by the National Natural Science Foundation of China (51175066), and the Provincial Key Laboratory of Oil & Gas Chemical Technology (PS13H11).

摘要:

以传统固相烧结法制备的不稳定的层状K2Ti2O5为前驱体, 直接将钛酸钾晶须进行离子交换得到具有纳微复合结构的TiO2载体, 等体积浸渍法制备出MoO3/TiO2催化剂, 运用SEM、XRD、BET、TEM等技术手段对载体和催化剂进行表征, 并考察了该TiO2复合结构负载催化剂的加氢脱硫催化活性。SEM和XRD分析显示:该纳微米复合结构是由纳米颗粒与微米晶须构成的特殊结构, 拥有不同形貌和尺寸的TiO2却具有相同的锐钛矿相。与单独TiO2纳米粒子和TiO2晶须相比, TiO2复合结构负载催化剂表现出更佳的脱硫催化能力, 在温度310℃、压力2.1 MPa、体积空速6 h-1、氢/油体积比600条件下, 催化剂表现出优异的DBT脱硫性能。

关键词: TiO2, 复合结构, 形貌, 加氢脱硫

Abstract:

With unstable layered K2Ti2O5 as the precursor in the traditional preparation of solid phase sintering, nano/micro-composite TiO2 (TiO2-m) derived from K2Ti2O5 was synthesized via ion-exchange. Supported MoO3/TiO2-m catalysts were prepared by incipient impregnation. Simultaneously, the properties of supports and catalysts were characterized by means of SEM, XRD, BET and TEM. An investigation into the HDS performance of MoO3/TiO2-m catalysts for dibenzothiophene was performed. SEM and XRD results showed that the prepared TiO2-m supports were shaped in nano-scale particle and micron-sized whisker morphology, having the same anatase phase with different morphologies and sizes of TiO2. Compared with pure morphology control sample, HDS tests indicated that Mo catalysts supported on TiO2-m showed the best HDS catalytic activity under relatively mild reaction conditions (310℃, 2.1 MPa, LHSV 6 h-1 and H2/feed ratio 600 m3·m-3).

Key words: TiO2, cmposite structure, morphology, hydrodesulfurization

中图分类号: