平直和柱面小翼涡发生器诱发流动特性PIV实验研究

doi:10.3969/j.issn.0438-1157.2013.08.010

化工学报 ›› 2013, Vol. 64 ›› Issue (8): 2774-2780.DOI: 10.3969/j.issn.0438-1157.2013.08.010

平直和柱面小翼涡发生器诱发流动特性PIV实验研究

汉京晓, 周国兵

华北电力大学能源动力与机械工程学院, 北京 102206

收稿日期:2012-12-03 修回日期:2013-01-23 出版日期:2013-08-05 发布日期:2013-08-05
通讯作者: 周国兵
作者简介:汉京晓(1987- ),男,博士研究生。
基金资助:
河北省自然科学基金项目(E2011502010);中央高校基本科研业务费专项基金项目(09MG25)。

PIV investigation on induced flow characteristics in cylindrical winglet vortex generators

HAN Jingxiao, ZHOU Guobing

School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing 102206, China

Received:2012-12-03 Revised:2013-01-23 Online:2013-08-05 Published:2013-08-05
Supported by:
supported by the Natural Science Foundation of Hebei Province(E2011502010)and the Fundamental Research Funds for the Central Universities(09MG25).

摘要/Abstract

摘要： 在Re=700、攻角α=60°时,利用粒子图像测速技术(PIV)研究了矩形通道内平直和柱面小翼诱发的流动结构,获得涡发生器(VG)后1~3倍弦长距离的速度场和涡量场。结果表明,三角小翼的涡结构主要分布在斜边中心和后缘角区;梯形和矩形小翼的涡结构主要分布在前缘翼梢区域和后缘区域;此外,柱面梯形小翼中心区域的涡结构明显,影响范围最大。随着流动的进行,涡结构强度逐渐减弱,三角小翼仅维持一个主涡向下继续运动;梯形和矩形小翼也仅维持一个主涡和一个后缘角涡的结构。随着斜截角的减小,前缘和中心区域诱发高强度涡结构的能力增强,影响范围也广,而后缘角涡的影响范围较小,且与底部壁面的距离较远。

关键词: 涡发生器, 粒子图像测速, 流动特性, 柱面小翼, 平直小翼

Abstract: The flow structure induced by plane and cylindrical shell delta winglet,trapezoidal winglet and rectangular winglet vortex generators(VGs)is investigated with the particle image velocimetry(PIV)to obtain the velocity and vorticity fields.A small rectangular wind tunnel is built to carry out experiments at Reynolds number Re=700 and attack angle α=60°.The results show that the vortex structure of plane and cylindrical shell delta winglets is mainly distributed in the central area of the inclination edge and the corner area of the trailing edge of the VG. For trapezoidal and rectangular winglets,vortices mainly distribute in the wing tip region of the leading edge area and the trailing edge area.Besides,the cylindrical shell trapezoidal winglet induces a central area vortex structure,which has the largest influential area among all types of VGs.The vortex structure induced by the leading edge of trapezoidal and rectangular winglets is generally stronger than that by trailing edge area.As the flow goes on,the strength of vortex structures degrades.Only one main vortex can be maintained along the flow direction in the case of a delta winglet,while one main vortex and one trailing edge corner vortex can be identified in a trapezoidal and rectangular winglet.The vortex structure induced by plane shell winglet tends to get away from the bottom wall,while the vortex structure induced by a cylindrical shell winglet tends to maintain close to the bottom wall.

Key words: vortex generator, particle image velocimetry, flow characteristics, cylindrical shell winglet, plane winglet

中图分类号:

TK124

汉京晓, 周国兵. 平直和柱面小翼涡发生器诱发流动特性PIV实验研究[J]. 化工学报, 2013, 64(8): 2774-2780.

HAN Jingxiao, ZHOU Guobing. PIV investigation on induced flow characteristics in cylindrical winglet vortex generators[J]. CIESC Journal, 2013, 64(8): 2774-2780.

参考文献 20

[1]	Biswas G,Torii K,Fujii D,Nishino K.Numerical and experimental determination of flow structure and heat transfer effects of longitudinal vortices in a channel flow[J].International Journal of Heat and Mass Transfer,1996,39(16):3441-3451
[2]	Tiwari S,Maurya D,Biswas G,Eswaran V.Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets[J].International Journal of Heat and Mass Transfer,2003,46(15):2841-2856
[3]	Zhou Guobing(周国兵),Yang Laishun(杨来顺).Influence of different vortex generators on heat transfer in direct air-cooled condensers[J].Proceedings of the CSEE(中国电机工程学报),2012,32(5):1-8
[4]	Tian Liting(田丽亭),Lei Yonggang(雷勇刚),He Yaling(何雅玲).Heat transfer enhancement in a channel with longitudinal vortex generators and field synergy principle analysis[J].Journal of Engineering Thermophysics(工程热物理学报),2008,29(12):2128-2130
[5]	Wang Jiansheng(汪健生),Tang Junjie(汤俊洁),Zhang Jinfeng(张金凤).Mechanism of heat transfer enhancement of semi-ellipse vortex generator[J].Chinese Journal of Mechanical Engineering(机械工程学报),2006,42(5):160-164
[6]	Song Wenji(宋文吉),Shen Jie(申洁),Li Qingling(李庆领).An experimental study on the enhanced heat transfer of the plane plates in the rectangle longitudinal vortex generators[J].Chemical Mechanics(化工机械),2006,33(3):133-136
[7]	Ye Qiuling(叶秋玲),Zhou Guobing(周国兵),Cheng Jinming(程金明),Wang Xi(王锡),Cheng Weiliang(程伟良).Experimental study of heat transfer enhancement and pressure drop characteristics of oblique-cut semi-elliptic cylinder shell vortex generators[J].Journal of Mechanical Engineering(机械工程学报),2010,46(16):162-169
[8]	Leu J S,Wu Y H,Jang J Y.Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators[J].International Journal of Heat and Mass Transfer,2004,47:4327-4338
[9]	Wang C C,Lo J,Lin Y T,Wei C S.Flow visualization of annular and delta winglet vortex generators in fin-and-tube heat exchanger application[J].International Journal of Heat and Mass Transfer,2002,45(18):3803-3815
[10]	Gentry M C,Jacobi A M.Heat transfer enhancement by delta-wing vortex generators on a flat plate:vortex interactions with the boundary layer[J].Experimental Thermal and Fluid Science,1997,14:231-242
[11]	Chen J M,Chiou C C.Experimental investigation of a parallel vortex-plate interaction[J].Journal of Fluids and Structures,1998, 12:295-314
[12]	Chen T Y,Shu H T.Flow structures and heat transfer characteristics in fan flows with and without delta-wing vortex generators[J].Experimental Thermal and Fluid Science,2004,28:273-282
[13]	Kim E,Yang J S.An experimental study of heat transfer characteristics of a pair of longitudinal vortices using color capturing technique[J].International Journal of Heat and Mass Transfer,2002,45:3349-3356
[14]	Wang D,Xia Z,Zhao Y,Wang B,Zhao Y.Imaging of the space-time structure of a vortex generator in supersonic flow[J].Chinese Journal of Aeronautics,2012,25:57-63
[15]	Jia Rong(贾蓉).Experimental study on air flow characteristics between fins with delta wings.Beijing:North China Electric Power University,2010
[16]	Henze M,von Wolfersdorf J.Influence of approach flow conditions on heat transfer behind vortex generators[J].International Journal of Heat and Mass Transfer,2011,54(1/2/3):279-287
[17]	Zhang Haibin(张海滨),Bai Bofeng(白博峰),Liu Li(刘利),Sun Huijuan(孙慧娟).Mixing characteristics of hollow cone spray with confined crossflow[J].CIESC Journal(化工学报),2012,63(5):1354-1359
[18]	Zhang Haijun(张海军),Guo Xueyan(郭雪岩),Chen Yongchen(陈永辰),Ni Juanjuan(倪娟娟).Evaluation of turbulence models used in simulation of flow field in bluff-body burner[J].CIESC Journal(化工学报),2010,61(3):573-579
[19]	Fang F M,Chen J C,Hong Y T.Experimental and analytical evaluation of flow in a square-to-square wind tunnel contraction[J].Journal of Wind Engineering and Industrial Aerodynamics,2001,89:247-262
[20]	Wu Xiaolin(吴小林),Xiong Zhiyi(熊至宜),Ji Zhongli(姬忠礼),Shi Mingxian(时铭显).Numerical simulation of processing vortex core in cyclone separator[J].Journal of Chemical Industry and Engineering (China)(化工学报),2007,58(2):383-390

平直和柱面小翼涡发生器诱发流动特性PIV实验研究

PIV investigation on induced flow characteristics in cylindrical winglet vortex generators

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王泽栋, 石至平, 刘丽艳. 考虑气泡非均匀耗散的矩形反应器声流场数值模拟及结构优化[J]. 化工学报, 2023, 74(5): 1965-1973.
[2]	周必茂, 许世森, 王肖肖, 刘刚, 李小宇, 任永强, 谭厚章. 烧嘴偏转角度对气化炉渣层分布特性的影响[J]. 化工学报, 2023, 74(5): 1939-1949.
[3]	盛林, 昌宇, 邓建, 骆广生. 阶梯式T型微通道内有序气泡群的形成和流动特性研究[J]. 化工学报, 2023, 74(1): 416-427.
[4]	张建伟, 李保帅, 董鑫, 冯颖. 撞击流反应器内幂律流体流动特性的数值模拟[J]. 化工学报, 2022, 73(11): 4917-4927.
[5]	李凡, 陆高锋, 马光柏, 翟晓强, 杨顺法. 纵向涡强化圆管内换热的数值模拟及性能分析[J]. 化工学报, 2021, 72(S1): 120-126.
[6]	林伟翔, 苏港川, 陈强, 文键, 王斯民. 基于超声技术的沉浸式换热器强化传热研究[J]. 化工学报, 2021, 72(8): 4055-4063.
[7]	别海燕, 黄晨, 安维中, 李玉龙, 林子昕. 正反馈式流体振荡器内部流动特性的数值模拟[J]. 化工学报, 2021, 72(3): 1504-1511.
[8]	陆海峰, 阮琥, 曹嘉琨, 郭晓镭, 刘海峰, 袁崇硕. 细粉下料过程的气固流体动力学作用分析[J]. 化工学报, 2021, 72(11): 5533-5542.
[9]	刘志刚,董开明,吕明明,季璨,江亚柯. 基于微观粒子图像测速法的微肋阵通道内流场特性研究[J]. 化工学报, 2021, 72(10): 5094-5101.
[10]	叶思施, 唐巧, 王运东. 混合澄清槽澄清室内流场特性测量[J]. 化工学报, 2020, 71(2): 535-543.
[11]	张建伟, 马繁荣, 张志刚, 冯颖. 双组水平喷嘴撞击流反应器流场POD分析[J]. 化工学报, 2018, 69(7): 2916-2925.
[12]	尚灵祎, 吴峰, 马晓迅. 带纵向涡发生器喷动床内颗粒流动特性PIV实验[J]. 化工学报, 2018, 69(5): 1923-1930.
[13]	张丽, 尚勃均, 李雅侠, 王翠华, 孟辉波, 龚斌, 吴剑华. 流线型涡发生器与螺旋片强化换热器壳侧传热[J]. 化工学报, 2017, 68(4): 1349-1357.
[14]	邹帅, 徐加辉, 周杰, 喜冠南. 过渡流下钝体绕流特性的可视化实验对比[J]. 化工学报, 2016, 67(S1): 210-216.
[15]	徐贵玲, 卢平, 许盼, 梁财, 陈晓平. 煤粉外水含量对上出料式发送罐供料特性的影响[J]. 化工学报, 2016, 67(7): 2767-2776.