热虹吸管换热器的换热性能测试与分析

doi:10.3969/j.issn.0438-1157.2014.z2.013

化工学报 ›› 2014, Vol. 65 ›› Issue (z2): 83-87.DOI: 10.3969/j.issn.0438-1157.2014.z2.013

热虹吸管换热器的换热性能测试与分析

张双¹, 马国远¹, 张思朝¹, 周峰^1,2

1. 北京工业大学环境与能源工程学院, 北京 100124;
2. 北京工大智源科技发展有限公司, 北京 100124

收稿日期:2014-08-26 修回日期:2014-09-05 出版日期:2014-12-30 发布日期:2014-12-30
通讯作者: 马国远
基金资助:
国家自然科学基金项目(51376010)。

Heat transfer performance test and analysis of thermosyphon heat exchanger

ZHANG Shuang¹, MA Guoyuan¹, ZHANG Sichao¹, ZHOU Feng^1,2

1. College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124, China;
2. Beijing Intelligence Source Technology Co. Ltd, Beijing 100124, China

Received:2014-08-26 Revised:2014-09-05 Online:2014-12-30 Published:2014-12-30
Supported by:
supported by the National Natural Science Foundation of China (51376010).

摘要/Abstract

摘要：

为探讨空气-空气整体式热虹吸管换热器的换热性能,利用换热器效能计算公式对其进行计算,并在焓差试验室对空气-空气整体式热虹吸管换热器的迎面风速和换热器管排数进行了测试和研究。结果表明,换热器的计算方法与试验数据最大误差在15%以内,且最大误差出现在温度效率较高时。因此,计算方法适用于工程设计计算。

关键词: 热虹吸管换热器, 热回收, 换热器效率, 热管, 迎面风速

Abstract:

A calculation method of an air-to-air thermosyphon heat exchanger was reported in this paper. The face velocity, number of rows and inclination angle of heat exchanger were tested and studied in an air enthalpy type psychrometric calorimeter including indoor and outdoor chambers. The error of the calculation method and experimental data was within 15%. Thus, the calculation method can be applied in engineering design of the air-to-air thermosyphon heat exchanger.

Key words: thermosyphon heat exchanger, heat recovery, effectiveness of heat exchanger, heat pipe, face velocity

中图分类号:

TK124

张双, 马国远, 张思朝, 周峰. 热虹吸管换热器的换热性能测试与分析[J]. 化工学报, 2014, 65(z2): 83-87.

ZHANG Shuang, MA Guoyuan, ZHANG Sichao, ZHOU Feng. Heat transfer performance test and analysis of thermosyphon heat exchanger[J]. CIESC Journal, 2014, 65(z2): 83-87.

参考文献 12

[1]	Gaugler R S. Heat transfer device[P]: US, 2350348.1944-06-06
[2]	Grover M, Cotter T P, Erikson G F. Structure of very high thermal conductance[J]. Journal of Applied Physics, 1964, 35(6): 1990-1991
[3]	Riehl R R, Dutra T. Development of an experimental loop heat pipe for application in future space missions[J]. Applied Thermal Engineering, 2005, 25: 101-112
[4]	Li J, Wang D M, Peterson G P B. A compact loop heat pipe with flat square evaporator for high power chipcooling[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2011, 1: 519-527
[5]	Du J, Bansal P, Huang B. Simulation model of a greenhouse with a heat-pipe heating system[J]. Applied Energy, 2012, 93: 268-276
[6]	Singh R, Mochizuki M, Mashiko K, Nguyen T. Heat pipe based cold energy storage systems for datacenter energy conservation[J]. Energy, 2011, 36: 2802-2811
[7]	Ahmadzadehtalatapeh M, Yau Y H. The application of heat pipe heat exchangers to improve the air quality and reduce the energy consumption of the air conditioning system in a hospital ward—a full year model simulation[J]. Energy and Buildings, 2011, 43(9): 2344-2355
[8]	Srimuang W, Amatachaya P. A review of the applications of heat pipe heat exchangers for heat recovery[J]. Renewable and Sustainable Energy Reviews, 2012, 16(6): 4303-4315
[9]	Zhang H, Zhuang J. Research, development and industrial application of heat pipe technology in China[J]. Applied Thermal Engineering, 2003, 23(9): 1067-1083
[10]	Hassan M A M. Investigation of performance of heat pipe as heat exchanger using alternative refrigerants[J]. Journal of Energy Engineering, 2013, 139(1): 18-24
[11]	Yang Shiming(杨世铭), Tao Wenquan(陶文铨). Heat Transfer(传热学) [M]. Beijing: Higher Education Press, 2008
[12]	AHRI Standard 1060—2011. Performance rating of air-to-air heat exchangers for energy recovery ventilation equipment[S].USA, AHRI, 2011

[1]	蒋祎璠, 刘蕾, 赵耀, 代彦军. UVLED光学元件液冷散热系统性能研究[J]. 化工学报, 2023, 74(S1): 154-160.
[2]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[3]	申利梅, 胡博兴, 谢雨霏, 曾伟豪, 张晓屿. 超薄平板热管传热性能的实验研究[J]. 化工学报, 2023, 74(S1): 198-205.
[4]	吴延鹏, 刘乾隆, 田东民, 陈凤君. 相变材料与热管耦合的电子器件热管理研究进展[J]. 化工学报, 2023, 74(S1): 25-31.
[5]	黄琮琪, 吴一梅, 陈建业, 邵双全. 碱性电解水制氢装置热管理系统仿真研究[J]. 化工学报, 2023, 74(S1): 320-328.
[6]	史方哲, 甘云华. 超薄热管启动特性和传热性能数值模拟[J]. 化工学报, 2023, 74(7): 2814-2823.
[7]	杨辉著, 兰精灵, 杨月, 梁嘉林, 吕传文, 朱永刚. 高功率平板热管传热性能的实验研究[J]. 化工学报, 2023, 74(4): 1561-1569.
[8]	陈建勋, 刘金平, 许雄文, 余银豪. 一种新型环路重力热管的数值模拟和性能优化[J]. 化工学报, 2023, 74(2): 721-734.
[9]	魏进家, 刘蕾, 杨小平. 面向高热流电子器件散热的环路热管研究进展[J]. 化工学报, 2023, 74(1): 60-73.
[10]	魏琳, 郭剑, 廖梓豪, Dafalla Ahmed Mohmed, 蒋方明. 空气流量对空冷燃料电池电堆性能的影响研究[J]. 化工学报, 2022, 73(7): 3222-3231.
[11]	张苗, 杨洪海, 尹勇, 徐悦, 沈俊杰, 卢心诚, 施伟刚, 王军. 氧化石墨烯/水脉动热管的启动及传热特性[J]. 化工学报, 2022, 73(3): 1136-1146.
[12]	赵佳腾, 吴晨辉, 戴宇成, 饶中浩. 脉动热管强化传热及其应用研究进展[J]. 化工学报, 2022, 73(2): 535-565.
[13]	谢广烁, 张斯亮, 王家瑞, 肖娟, 王斯民. 自转式内置转子颗粒污垢抑制特性研究[J]. 化工学报, 2022, 73(12): 5384-5393.
[14]	郑克晴, 孙亚, 闫阳天, 李丽, 杨钧. 一种热电协同增强的固体氧化物燃料电池新型连接件的数值模拟[J]. 化工学报, 2022, 73(12): 5572-5580.
[15]	彭明, 夏强峰, 蒋理想, 张瑞元, 郭凌燚, 陈黎, 陶文铨. 流道布置对风冷燃料电池性能影响的研究[J]. 化工学报, 2022, 73(10): 4625-4637.

热虹吸管换热器的换热性能测试与分析

Heat transfer performance test and analysis of thermosyphon heat exchanger

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 12

相关文章 15

编辑推荐

Metrics

本文评价