CIESC Journal ›› 2015, Vol. 66 ›› Issue (9): 3782-3787.DOI: 10.11949/j.issn.0438-1157.20150843

Previous Articles     Next Articles

Morphology-controlled synthesis of mesoporous alumina dependenton triblock copolymer

GU Ling1,2, CUI Xili2, TANG Shaokun2,3, ZHANG Xiangwen2,3   

  1. 1 School of Chemistry and Environmental Engineering, Datong University, Datong 037009, Shanxi, China;
    2 Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering & Technology, Tianjin University, Tianjin 300072, China;
    3 Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin 300072, China
  • Received:2015-06-08 Revised:2015-06-15 Online:2015-09-05 Published:2015-09-05
  • Supported by:

    supported by the National Natural Science Foundation of China (21206118, 21328601), the Natural Science Foundation of Tianjin (12JCYBJC13500) and PetroChina Innovation Foundation (2013D-5006-0402).

以三嵌段共聚物为模板介孔氧化铝的形貌控制合成

古玲1,2, 崔希利2, 唐韶坤2,3, 张香文2,3   

  1. 1 大同大学化学与环境工程学院, 山西 大同 037009;
    2 天津大学化工学院绿色合成与转化教育部重点实验室, 天津 300072;
    3 天津化学化工协同创新中心, 天津 300072
  • 通讯作者: 唐韶坤
  • 基金资助:

    国家自然科学基金项目(21206118,21328601);天津市自然科学基金项目(12JCYBJC13500);中石油创新基金(2013D-5006-0402)。

Abstract:

In this study, sheet-like and rod-shaped mesoporous aluminas were synthesized with a triblock copolymer as the structure-directing agent via hydrothermal method. X-ray diffraction, transmission electronic microscopy and nitrogen adsorption and desorption were performed to determine the crystalline phase, morphology and pore structure of the aluminas. It was found that the morphologies, mesostructures and pore parameters of aluminas can be altered by the introduction of the triblock copolymer. The adsorption of the triblock copolymer on the surface of the alumina gels induced the oriented growth of the crystallines, resulting in the formation of final aluminas nanorods.

Key words: alumina, mesoporous, hydrothermal, structure-directing, nanorod

摘要:

以三嵌段共聚物作为结构导向剂,采用水热法合成了片状和棒状介孔氧化铝,采用X射线衍射仪、场发射透射电子显微镜、低温氮气吸脱附实验对合成的介孔氧化铝的晶相、形貌和介孔结构进行表征。研究结果表明,三嵌段共聚物的引入能够有效调控氧化铝的形貌、介孔结构以及孔参数。三嵌段共聚物在氧化铝前驱体表面的吸附诱导了晶体的取向生长,并最终形成了棒状氧化铝。

关键词: 三氧化二铝, 介孔, 水热, 结构导向剂, 纳米棒

CLC Number: