A microbial fouling model based on Kern-Seaton model and Capdeville biofilm growth system

doi:10.11949/j.issn.0438-1157.20151944

CIESC Journal ›› 2016, Vol. 67 ›› Issue (7): 2998-3003.DOI: 10.11949/j.issn.0438-1157.20151944

Previous Articles Next Articles

A microbial fouling model based on Kern-Seaton model and Capdeville biofilm growth system

XU Zhiming¹, SHEN Yiwen¹, ZHANG Yilong², LIU Zuodong¹, WANG Jingtao¹, WANG Yuhang¹

1. School of Energy and Power Engineering, Northeast Dianli University, Jilin 132012, Jilin, China;
2. School of Automation Engineering, Northeast Dianli University, Jilin 132012, Jilin, China

Received:2015-12-21 Revised:2016-04-26 Online:2016-07-05 Published:2016-07-05
Supported by:
supported by the National Natural Science Foundation of China (51476025).

基于Kern-Seaton模型结合Capdeville生物膜增长体系建立的微生物污垢模型

徐志明¹, 沈艺雯¹, 张一龙², 刘坐东¹, 王景涛¹, 王宇航¹

1. 东北电力大学能源与动力工程学院, 吉林省吉林市 132012;
2. 东北电力大学自动化工程学院, 吉林省吉林市 132012

通讯作者: 沈艺雯
基金资助:
国家自然科学基金项目（51476025）。

Abstract

Abstract:

In order to study biofouling process in heat exchangers, a new microbial fouling model was established by introducing the Capdeville biofilm growth system into the Kern-Seaton model. The new model was verified by experiments of the iron bacteria growth in tubular heat exchangers. Less than 20% relative error was achieved between the model prediction and the experimental data regardless of the induction period.

Key words: microbial fouling, fouling model, Capdeville biofilm growth system, cooling water

摘要：

为研究换热设备生物污垢的形成过程，将Capdeville生物膜增长体系引入Kern-Seaton模型，建立了一个新的微生物污垢模型。采用铁细菌和管式换热装置对模型进行了实验验证。结果表明：除诱导期外，新建的微生物污垢热阻模型的计算数据和实验数据的相对误差小于20%。

关键词: 微生物污垢, 污垢模型, Capdeville生物膜增长体系, 冷却水

CLC Number:

TK124

XU Zhiming, SHEN Yiwen, ZHANG Yilong, LIU Zuodong, WANG Jingtao, WANG Yuhang. A microbial fouling model based on Kern-Seaton model and Capdeville biofilm growth system[J]. CIESC Journal, 2016, 67(7): 2998-3003.

徐志明, 沈艺雯, 张一龙, 刘坐东, 王景涛, 王宇航. 基于Kern-Seaton模型结合Capdeville生物膜增长体系建立的微生物污垢模型[J]. 化工学报, 2016, 67(7): 2998-3003.

References 21

[1]	杨善让, 徐志明, 孙灵芳. 换热设备污垢与对策[M]. 北京: 科学出版社, 2004: 1-76. YANG S R, XU Z M, SUN L F. Fouling and Countermeasures for Heat Transfer Equipment[M]. Beijing:Science Press, 2004: 1-76.
[2]	KERN D Q, SEATON R E. A theoretical analysis of thermal surface fouling[J]. Chem. Eng. Prog., 1959, 4(5): 258-262.
[3]	陈黎明, 柴立和. 生物膜废水处理系统的数学模型及机理探讨[J]. 自然科学进展, 2005, 15(7): 843-848. CHEN L M, CHAI L H. Mathematical model and mechanism of biofilm wastewater treatment system[J]. Progress in Natural Science, 2005, 15(7): 843-848.
[4]	PICIOREANU C, LOOSDRECHT M C V, HEIJNEN J J. Two-dimensional model of biofilm detachment caused by internal stress from liquid flow[J]. Biotechnology & Bioengineering, 2001, 72(2): 205-218.
[5]	MOLOBELA I P, ILUNGA F M. Impact of bacterial biofilms: the importance of quantitative biofilm studies[J]. Annals of Microbiology, 2012, 62(2): 461-467.
[6]	肖鸿, 杨平, 郭勇, 等. 生物膜反应器中生物膜脱落的机理及数学模型[J]. 化工环保, 2005, 25(1): 23-28. XIAO H, YANG P, GUO Y, et al. Biofilm detachment mechanism and mathematical models[J]. Environmental Protection of Chemical Industry, 2005, 25(1): 23-28.
[7]	JANUS T. Integrated mathematical model of a MBR reactor including biopolymer kinetics and membrane fouling[J]. Procedia Engineering, 2014, 70: 882-891.
[8]	CHO J, AHN K H, SEO Y, et al. Modification of ASM No.1 for a submerged membrane bioreactor system: including the effects of soluble microbial products on membrane fouling [J]. Water Science & Technology, 2003, 47(12): 177-181.
[9]	LIU Y, CAPDEVILLE B. Dynamics of nitrifying biofilm growth in biological nitrogen removal process[J]. Waterence & Technology, 1994, 29(7): 377-380.
[10]	ROQUES H, YUE S, SAIPANICH S, et al. Faut-il abandonner le formalisme de monod pour la modelisation des processus de depollution par voie biologique?[J]. Water Research, 1982, 16(6): 839-847.
[11]	刘雨, 王岐东. 生物膜增长动力学模型[J]. 北京轻工业学院学报, 1997, 15(2): 28-31. LIU Y, WANG Q D. Kinetic models of biofilm growth[J]. Journal of Institute of Light Industry, 1997, 15(2): 28-31.
[12]	曾庆楠, 吴云, 张宏伟, 等. 膜材料对膜曝气生物膜反应器性能影响的比较[J]. 化工学报, 2016, 67(4): 1483-1489. ZENG Q N, WU Y, ZHANG H W, et al. Effects of membrane materials on the performance of membrane aerated biofilm reactor[J]. CIESC Journal, 2016, 67(4): 1483-1489.
[13]	刘雨. 生物膜法污水处理技术[M].北京: 中国建筑工业出版社, 2000: 47-58. LIU Y. Sewage Disposal Technology of Biofilm Process[M]. Beijing: China Architecture & Building Press, 2000: 47-58.
[14]	陈胜, 孙德智, 陈桂霞, 等. 移动床生物膜法处理垃圾渗滤液COD降解动力学[J]. 化工学报, 2007, 58(3): 733-738. CHEN S, SUN D Z, CHEN G X, et al. Kinetics of COD degradation in landfill leachate treatment using moving bed bioreactor[J]. Journal of Chemical Industry and Engineering(China), 2007, 58(3): 733-738.
[15]	TABOREK J, AOKI T, RITTER R B, et al. Fouling: the major unresolved problem in heat transfer[J]. Chem. Eng. Prog., 1972, 68(2): 59-68.
[16]	GUDMUNDSON J. Heat transfer fouling[D]. Birmingham: University of Birmingham, 1977.
[17]	徐志明, 张一龙, 徐欣. 温度及浓度对析晶污垢沉积特性影响的模拟研究[J]. 中国电机工程学报, 2014, 34(35): 6263-6270. DOI: 10.13334/j.0258-8013.pcsee.2014.35.002. XU Z M, ZHANG Y L, XU X. Simulation study on influent of temperature and concentration on crystallization fouling deposition[J]. Proceedings of the CSEE, 2014, 34(35): 6263-6270. DOI: 10.13334/j.0258-8013.pcsee.2014.35.002.
[18]	于大禹, 尹旭, 张静, 等. 基于模拟循环冷却装置的微生物污垢形成的影响因素[J]. 化工学报, 2011, 62(12): 3503-3510. DOI: 10.3969/j.issn.0438-1157.2011.12.030. YU D Y, YIN X, ZHANG J, et al. Factors affecting microbial fouling formation in simulated recirculating cooling-water system[J]. CIESC Journal, 2011, 62(12): 3503-3510. DOI: 10.3969/j.issn.0438-1157. 2011.12.030.
[19]	田磊, 杨倩鹏, 史琳, 等. 热泵工况下竖直不锈钢表面微生物污垢动态生长行为[J]. 化工学报, 2012, 63(1): 230-236. DOI: 10.3969/j.issn.0438-1157.2012.01.032. TIAN L, YANG Q P, SHI L, et al. Evolution of biofouling on a vertical stainless steel surface caused by bacillus subtilis under heat pump conditions[J]. CIESC Journal, 2012, 63(1): 230-236. DOI: 10.3969/j.issn.0438-1157.2012.01.032.
[20]	关晓辉, 崔长龙, 曹生现, 等. 不锈钢缩放管中典型致垢微生物致垢能力[J]. 化工进展, 2013, 32(6): 1429-1434. DOI: 10.3969/ j.issn.1000-6613.2013.06.038. GUAN X H, CUI C L, CAO S X, et al. Study on fouling ability of typical fouling microorganisms in the stainless steel zoom pipe[J]. Chemical Industry and Engineering Program, 2013, 32(6): 1429-1434. DOI: 10.3969/j.issn.1000-6613.2013.06.038.
[21]	徐志明, 郝占龙, 张一龙, 等. 交叉缩放椭圆管中微生物污垢特性[J]. 微生物学通报, 2013, 40(11): 1978-1986. DOI: 10.13344/ j.microbiol.china. 2013.11.002. XU Z M, HAO Z L, ZHANG Y L, et al. Microbial fouling characteristics of the alternating elliptical axis tube[J]. Microbiology China, 2013, 40(11): 1978-1986. DOI: 10.13344/j.microbiol.china. 2013.11.002.

A microbial fouling model based on Kern-Seaton model and Capdeville biofilm growth system

基于Kern-Seaton模型结合Capdeville生物膜增长体系建立的微生物污垢模型

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References 21

Related Articles 14

Recommended Articles

Metrics

Comments

[1]	Zuodong LIU, Siqi LI, Weiwei XING, Zhiming XU. Characteristics of microbial fouling on Ni-P- (nano) TiO₂ composite coating of plate heat exchanger [J]. CIESC Journal, 2020, 71(8): 3535-3544.
[2]	Jiying WU, Yimin MA, Wensheng CAO. Performance of biogas engine driven air source heat pump system under variable conditions [J]. CIESC Journal, 2020, 71(8): 3789-3796.
[3]	Fei DONG, Tianlin YUAN, Zhiwei WU, Jie NI. Numerical study of engine water jackets using RPI model [J]. CIESC Journal, 2019, 70(S2): 250-257.
[4]	Yuling ZHANG, Liping ZHANG, Qian WANG, Xudong LI, Xiaodong LIU, Jinghong ZHANG. Optimization of extraction process of inorganic phosphorus in scale of circulating cooling system [J]. CIESC Journal, 2019, 70(3): 1083-1088.
[5]	WU Yuting, ZHAO Yingkun, LEI Biao, MENG Qingpeng, CHEN Rumeng, ZHI Ruiping, MA Chongfang. Effect of cooling water flow rate on power generation of organic Rankine cycle system [J]. CIESC Journal, 2018, 69(6): 2639-2645.
[6]	XIE Feibo, ZHU Tong, GAO Naiping. Effect of cold source temperature on power generation of small organic Rankine cycle system with low-grade waste heat [J]. CIESC Journal, 2016, 67(10): 4111-4117.
[7]	CAO Shengxian, ZHAO Zhenchao, LI Sibo, CHEN Yanfei, FU Congwei, REN Jibing, FENG Baozhu. Development of online monitoring and evaluation device for treatment of circulating cooling water [J]. CIESC Journal, 2015, 66(7): 2649-2655.
[8]	YANG Shuai，MEI Ning，YUAN Han. Experimental investigation on the microbial fouling characteristics of the seawater plate heat exchanger [J]. Chemical Industry and Engineering Progree, 2013, 32(12): 3026-3031.
[9]	ZHANG Fan，Lü Xiaoping，HAN Pingfang，QIN Zhenbao. Sterilization of circulating cooling water by ultrasound [J]. , 2011, 30(7): 1431-.
[10]	CHENG Lihua1，CHEN Jianjun2，ZHANG Junzheng3，HUANG Min1，HE Dongsheng3. Technological development and industrial application of refinery wastewater reuse as circulating cooling water [J]. , 2011, 30(10): 2324-.
[11]	LIU Fang，ZHANG Guizhi，XIA Lu，YANG Fei，CHANG Xin，ZHAO Chaocheng. Effects of operating conditions on corrosion and fouling in circulating cooling water system [J]. , 2010, 29(4): 772-.
[12]	YU Dayu1，2，ZHANG Jing1，2，YIN Xu1，2，WANG Gang1，2，ZHANG Yanhui1，CAO Shengxian1. Dynamic simulation for microbial fouling formation in circulating cooling water [J]. , 2010, 29(11): 2193-.
[13]	CHEN Jifan，ZHOU Shaoqi. Preparation of water stabilizer WSW-216 of recirculating cooling water in the oil refinery [J]. , 2009, 28(9): 1677-.
[14]	ZHANG Guizhi，LIU Fang，ZHAO Chaocheng，MA Tao，XIA Lu. Relationship between nutrition substance concentration and biofouling growth characteristics in recirculating cooling water system [J]. , 2009, 28(11): 2052-.