CIESC Journal ›› 2017, Vol. 68 ›› Issue (8): 3126-3132.DOI: 10.11949/j.issn.0438-1157.20161828

Previous Articles     Next Articles

Separation of vanillin from dilute aqueous solutions by pervaporation-crystallization coupling

WANG Qian, ZHANG Xinru, WANG Yonghong, HOU Mengjie, ZHANG Tao, LI Long, LIU Chengcen   

  1. College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
  • Received:2016-12-29 Revised:2017-05-03 Online:2017-08-05 Published:2017-08-05
  • Supported by:

    supported by the National Natural Science Foundation of China (21506140) and the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (2015114).

渗透汽化-结晶耦合分离稀溶液中的香兰素

王倩, 张新儒, 王永洪, 侯蒙杰, 张桃, 李龙, 刘成岑   

  1. 太原理工大学化学化工学院, 山西 太原 030024
  • 通讯作者: 张新儒
  • 基金资助:

    国家自然科学基金青年基金项目(21506140);山西省高等学校科技创新项目(2015114)。

Abstract:

The high performance poly(ether-block-amide) (PEBA2533) membrane was prepared by dry phase inversion method, and then used for separation of vanillin from dilute aqueous solutions in the pervaporation-crystallization coupling (PVCC) system. The structural morphology of PEBA2533 membranes were characterized by SEM. The effects of feed concentration and operating temperature on the pervaporation performances of membrane were investigated. The results showed that the swelling degree of PEBA2533 membrane increased with the increase of concentration. This indicated that PEBA2533 could preferentially adsorb vanillin. With the increase of the feed concentration, the flux of vanillin increased while the separation factor decreased slightly. The vanillin permeation flux and separation factor both increased as the operating temperature increased. The equation of Arrhenius indicated that vanillin was more sensitive to temperature than water. When the temperature of first condenser was controlled at 2℃ in the PVCC system, the flux of crystal vanillin in the first condenser was 39.52 g·m-2·h-1 and the purity was more than 99%.

Key words: vanillin, pervaporation, pervaporation-crystallization coupling, poly (ether-block-amide)

摘要:

以聚醚嵌段共聚酰胺(PEBA2533)为膜材料,采用干法相转化法制备性能优异的高分子膜,用于渗透汽化-结晶耦合(PVCC)分离系统中回收稀水溶液中的香兰素。采用扫描电子显微镜(SEM)对PEBA2533膜的形貌进行表征。考察原料液浓度、温度对膜渗透汽化性能的影响。结果表明:随着溶液浓度的增加,PEBA2533膜溶胀性能增加,说明PEBA2533能够优先吸附香兰素;随原料液浓度增加,香兰素渗透通量增加,分离因子略微下降;原料液温度增加,香兰素渗透通量和分离因子都增加;并通过Arrhenius方程计算得到香兰素比水对温度更加敏感。PVCC系统中控制一级冷凝器温度为2℃时,一级冷凝器中结晶态香兰素通量为39.52 g·m-2·h-1,纯度在99%以上。

关键词: 香兰素, 渗透汽化, 渗透汽化-结晶耦合, 聚醚嵌段共聚酰胺

CLC Number: