Effect of particle gradation on flow field of feeding pipe in classifier

doi:10.3969/j.issn.0438-1157.2012.10.014

CIESC Journal ›› 2012, Vol. 63 ›› Issue (10): 3101-3111.DOI: 10.3969/j.issn.0438-1157.2012.10.014

Previous Articles Next Articles

Effect of particle gradation on flow field of feeding pipe in classifier

DIAO Xiong¹, LI Shuangyue¹, HUANG Peng¹, REN Xihao²

1. School of Manufacturing Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China;
2. School of Logistic Engineering, Shanghai Maritime University, Shanghai 200135, China

Received:2012-02-28 Revised:2012-04-16 Online:2012-10-05 Published:2012-10-05
Supported by:
supported by the National Key Technology R&D Program(2011BAA04B04),the National Science and Technology Plan(09C2621502330)and the Postgraduate Innovation Fund sponsored by Southwest University of Science and Technology(11ycjj30,12ycjj41).

颗粒级配对分级机进料管流动特性影响的数值研究

刁雄¹, 李双跃¹, 黄鹏¹, 任曦²

1. 西南科技大学制造科学与工程学院, 四川绵阳 621010;
2. 上海海事大学物流工程学院, 上海 200135

通讯作者: 李双跃
作者简介:李双跃,刁雄(1986- ),男,硕士研究生。
基金资助:
国家科技支撑计划项目(2011BAA04B04);国家科技计划项目(09C2621502330);西南科技大学研究生创新基金项目(11ycjj30,12ycjj41)。

Abstract

Abstract: In order to investigate the effect of particle gradation on the flow field of the feeding pipe in a classifier,the computational fluid dynamics method was applied in the study of gas-solids two-phase flow field in the feeding pipe.After the model was verified,the effects of gas velocity,feeding concentration,particle gradation and density on the pressure difference of inlet and outlet,particle concentration distribution and dispersion were analyzed.The results showed that the pressure difference of inlet and outlet increased with increasing large size particle content of gradation.When gradation was with a high content of small size particle,concentration distribution was uniform and particle dispersion was good.The change of gas velocity,feeding concentration and particle density had less influence on particle dimensionless concentration distribution and dispersion.The operation parameters had significant effects on gradation with a high content of large size particle.With the increase of gas velocity,particle dimensionless concentration decreased,concentration non-uniformity decreased,and particle dispersion became better. With the increase of feeding concentration,concentration non-uniformity increased,and particle dispersion became worse.With the increase of particle density,concentration non-uniformity decreased,and particle dispersion became better.The dividing line between high and low dimensionless average concentration in the vertical section of the axial feeding pipe was Z=0.5 m,and it basically unchanged with the change of particle gradation and operation parameters.

Key words: superfine classifier, gas-solid two-phase flow, particle gradation, dimensionless concentration, particle dispersion

摘要： 为了分析颗粒级配对超细分级机进料管内流动特性的影响,利用计算流体力学(CFD)方法,对进料管内气固两相流动进行研究。在对计算模型进行验证的基础上,揭示了不同颗粒级配下进出口压差、颗粒浓度分布及颗粒分散等特性。研究表明:进料管进出口压差随着级配中大粒径颗粒含量的增加而增加。当级配中小粒径含量较大时,颗粒浓度分布均匀,颗粒分散性较好,入口风速、喂料浓度、颗粒密度的改变对颗粒量纲1浓度分布及分散性影响较小。对于大粒径含量较大的级配,随着入口风速的增加,量纲1浓度减小,浓度分布不均匀度减小,分散性提高;随着喂料浓度的增加,量纲1浓度分布变化较小,但浓度分布不均匀度增大,颗粒分散性下降;随着物料密度的增加,浓度分布不均匀度减小,颗粒分散性提高。竖直段轴向截面上颗粒量纲1平均浓度的高低分界线为一定值(Z=0.5 m),且与颗粒级配及操作参数的变化无关。

关键词: 超细分级机, 气固两相流, 颗粒级配, 量纲1浓度, 颗粒分散

CLC Number:

TD454

DIAO Xiong, LI Shuangyue, HUANG Peng, REN Xihao. Effect of particle gradation on flow field of feeding pipe in classifier[J]. CIESC Journal, 2012, 63(10): 3101-3111.

刁雄, 李双跃, 黄鹏, 任曦. 颗粒级配对分级机进料管流动特性影响的数值研究[J]. 化工学报, 2012, 63(10): 3101-3111.

References 22

[1]	Finch J A.Modelling a fish-hook in hydrocyclone selectivity curves[J].Powder Technology,1983,36(1):127-129
[2]	Nageswararao K.A critical analysis of the fish hook effect in hydrocyclone classifiers[J].Chemical Engineering Journal,2000,80(1/2/3):251-256
[3]	Roland N.CFS-HD:a new classifier for fine classification with high efficiency[J].International Journal of Mineral Processing,1996,44/45:723-731
[4]	Roland N.Fine classification with vaned rotors:at the outer edge of the vanes or in the interior vane free area[J].International Journal of Mineral Processing,2004,74:S137-S145
[5]	Liu Jiaxiang(刘家祥),Xu Delong(徐德龙),Zhao Jiangping(赵江平),Xu Yusheng(徐渝笙).The effects of inertia counter-rotating vortices in vortex classifier on particle classification[J].Journal of Xi'an University of Architecture&Technology(西安建筑科技大学学报),1998,30(1):63-66
[6]	Liu Jiaxiang(刘家祥),He Tingshu(何廷树),Xia Jingbo(夏靖波).The effect of frequency spectrum of the eddies of turbulent flow in a turbo classifier on its classification characteristics[J].Journal of Beijing University of Chemical Technology(北京化工大学学报),2003,30(5):48-51
[7]	Du Yanchen(杜妍辰),Wang Shulin(王树林).Particle trajectory in vortex classifier rotor[J].Journal of Chemical Industry and Engineering(China)(化工学报),2005,56(5):823-828
[8]	Chen Haiyan(陈海焱),Chen Wenmei(陈文梅),Xu Hailun(胥海伦).Effects of the operation parameters on the air classifier performance[J].Journal of Sichuan University:Engineering Science Edition(四川大学学报:工程科学版),2006,38(3):87-91
[9]	Li Shuangyue(李双跃),Li Jinchun(李进春),Ren Chaofu(任朝富),Li Hong(李洪).Research on classifying zone of vortex air classer based on rapid classification principle[J].China Powder Science and Technology(中国粉体技术),2009,15:114-119
[10]	Xu Ning,Li Guohua,Huang Zhichu.Numerical simulation of particle motion in turbo classifier[J].China Particuology,2005,3(5):275-278
[11]	Toneva P,Epple P,Breuer M,Peukert W,Wirth K.Grinding in an air classifier mill(Ⅰ):Characterisation of the one-phase flow[J].Powder Technology,2011,211(1):19-27
[12]	Toneva P,Wirth K,Peukert W.Grinding in an air classifier mill(Ⅱ):Characterisation of the two-phase flow[J].Powder Technology,2011, 211(1):28-37
[13]	Guo Lijie,Liu Jiaxiang,Liu Shengzhao,Wang Jinggang.Velocity measurements and flow field characteristic analyses in a turbo air classifier[J].Powder Technology,2007,178(1):10-16
[14]	Huang Qiang(黄强),Yu Yuan(于源),Liu Jiaxiang(刘家祥).Improvement on rotor cage structure of turbo air classifier and numerical simulation of inner flow field[J].CIESC Journal(化工学报),2011,62(5):1264-1268
[15]	Wang Fujun(王福军).Computational Fluid Dynamics Analysis—Theory and Application of CFD Software(计算流体动力学分析——CFD软件原理与应用)[M].Beijing:Tsinghua University Press,2004:124-125
[16]	Morsi S A,Alexander A J.An investigation of particle trajectories in two-phase flow systems[J].Journal of Fluid Mechanics,1972,55(2):193-208
[17]	Ma Aichun(马爱纯),Williams K C,Zhou Jiemin(周孑民),Jones M C.Numerical simulation of some effects on pressure drop predicting in pneumatic transport[J].Journal of Wuhan University of Technology(武汉理工大学学报),2010,32(23):13-16
[18]	Hu Yanhua(胡艳华),Shi Mingxian(时铭显).Numerical simulation and analysis of the gas-phase flow field inside 90°curved square duct with different inclination angle[J].China Petroleum Machinery(石油机械),2007,35(8):9-13
[19]	Taylor A M K P,Whitelaw J H,Yianneskis M.Curved ducts with strong secondary motion:velocity measurements of developing laminar and turbulent flow[J].Journal of Fluids Engineering,1982,104(2):350-359
[20]	Zhou Yun(周云),Chen Xiaoping(陈晓平),Liang Cai(梁财),Meng Qingmin(孟庆敏),Lu Peng(鹿鹏),Pu Wenhao(蒲文灏),Xu Pan(许盼).Effect of mean particle size of pulverized coal on dense phase pneumatic conveying at high pressure[J].Proceeding of the CSEE(中国电机工程学报),2009,29(26):25-29
[21]	Zhou Yun(周云),Chen Xiaoping(陈晓平),Liang Cai(梁财),Meng Qingmin(孟庆敏),Lu Peng(鹿鹏).Resistance characteristics of vertical bend in dense-phase pneumatic conveying of pulverized coal under high pressure[J].CIESC Journal(化工学报),2009,60(3):580-584
[22]	Diao Xiong(刁雄),Li Shuangyue(李双跃),Li Liangchao(李良超),Huang Peng(黄鹏).Numerical simulation on concentration distribution of particles in the feeding pipe of a superfine classifier[J].The Chinese Journal of Process Engineering(过程工程学报),2011,11(5):729-7

Effect of particle gradation on flow field of feeding pipe in classifier

颗粒级配对分级机进料管流动特性影响的数值研究

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References 22

Related Articles 10

Recommended Articles

Metrics

Comments

[1]	Yilin LIU, Yu LI, Yaxiong YU, Zheqing HUANG, Qiang ZHOU. Construction of two parameter mesoscale heat transfer model for gas-solid flow based on resetting temperature method [J]. CIESC Journal, 2022, 73(6): 2612-2621.
[2]	Huaxing ZHU, Jingxiao WANG, Jianliang XU, Zhenghua DAI, Haifeng LIU. Particle velocity and concentration distribution in double-exit staged entrained-flow gasifier [J]. CIESC Journal, 2022, 73(10): 4355-4365.
[3]	MA Qiao, LEI Fulin, ZHANG Yawen, YANG Shaojun, XU Xiang, XIAO Yunhan. Numerical simulation of gas-solid flow in recirculation system of dense transport bed under different aerating conditions [J]. CIESC Journal, 2016, 67(12): 4959-4968.
[4]	CAI Jie, ZHONG Wenqi, YUAN Zhulin. Modeling of gas-solid multi-way coupling of fluidization of slender particles in riser [J]. CIESC Journal, 2015, 66(11): 4342-4349.
[5]	ZHANG Yuchun， WANG Zhenbo，JIN Youhai，MA Yi. Numerical simulation on gas-solid mixing characteristics in mixing cavity of quick-contact cyclone reactor [J]. CIESC Journal, 2012, 63(2): 424-432.
[6]	DIAO Xiong, LI Shuangyue, HUANG Peng. Effect of feeding type on classification performance of superfine classifier [J]. CIESC Journal, 2012, 63(12): 3818-3825.
[7]	YUE Daxin，DIAO Xiong，LI Shuangyue，HUANG Peng. Computation of classifier cut size based on analysis of particle tracks [J]. Chemical Industry and Engineering Progree, 2012, 31(09): 1919-1925.
[8]	DIAO Xiong，LI Shuangyue，HUANG Peng，LI Liangchao. Numerical simulation of gas-solid two-phase flow in the feeding pipe of superfine classifier SCX [J]. Chemical Industry and Engineering Progree, 2012, 31(01 ): 41-46.
[9]	SUN Meng, LIU Shi, LI Zhihong, LEI Jing. Application of Electrical Capacitance Tomography to the Concentration Measurement in a Cyclone Dipleg [J]. , 2008, 16(4): 635-639.
[10]	SHANG Zhi, YANG Ruichang, FUKUDA Kenji, ZHONG Yong, JU Zejian. A Numerical Simulation of Gas-Particle Two-Phase Flow in a Suspension Bed Using Diffusion Flux Model [J]. , 2003, 11(5): 497-503.