THE APPROXIMATE AND PLAUSIBLE REASONING FOR ON-STREAM INSPECTION AND FAULT DIAGNOSIS IN PROCESS EQUIPMENT

Abstract

Abstract: A fuzzy multicriteria modelling method of defining a structural parameter for representing the grade of welding defect damage is presented. The methodology for safety assessment of process equipment and piping containing welding defects in fatigue loading based on the theory of fuzzy set for treatment of imprecisions and uncertainties is proposed, and the related expert system has been built.

摘要： 提出了根据模糊综合评判、定义结构参数用以表示焊接缺陷损伤程度的方法。建立了基于模糊集理论处理含焊接缺陷化工设备和管道承受疲劳载荷安全评定中解决不确定和非精确性的方法,并编制了相应的专家系统。

CLC Number:

TQ050

Dai Shuhe (Department of Mechanical Engineering, Nanjing Institute of Chemical Technology, Nanjing 210009). THE APPROXIMATE AND PLAUSIBLE REASONING FOR ON-STREAM INSPECTION AND FAULT DIAGNOSIS IN PROCESS EQUIPMENT[J]. .

戴树和. 化工装置在线检查诊断中的非精确性推理 [J]. CIESC Journal.

[1]	LIU Bo, WEI Xiaolan, WANG Weilong, SONG Ming, DING Jing. Corrosion behavior of In625 alloy and 316L stainless steel in NaCl-CaCl₂-MgCl₂ ternary eutectic molten salt [J]. CIESC Journal, 2017, 68(8): 3202-3210.
[2]	WANG Shuai, WANG Kejian, MA Yi, ZHANG Yinling, LIANG Wenbin, WANG Xu, SHI Jiao, JIANG Zhuoyu. Rheological properties of flame retardent and antistatic polypropylene material [J]. CIESC Journal, 2017, 68(8): 3023-3029.
[3]	ZHANG Fan, LIU Mingyan, XU Yangshuhan. Corrosion and deposition properties on anodization coatings of titanium dioxide nanotubes in geothermal water [J]. CIESC Journal, 2016, 67(2): 627-640.
[4]	LUO Wenbo, YUAN Shaojun, WANG Xiaomei, TANG Siyang, LI Chun, YUE Hairong, LIANG Bin. Friction and corrosion behavior of ceramic milling balls in milling-leaching combined digestion of ilmenites [J]. CIESC Journal, 2015, 66(5): 1844-1853.
[5]	DENG Bin, DAI Gance. Numerical simulation of surface renewal frequency on vertically rotating disc [J]. CIESC Journal, 2015, 66(4): 1407-1416.
[6]	ZHAI Junling, SHEN Minmin, SUN Chunning, WANG Junfeng, HA Chengyong. Preparation of water-based silicone rubber based on nano SiO₂/OTAC collaborative Pickering emulsion [J]. CIESC Journal, 2015, 66(4): 1585-1592.
[7]	LI Yu, LIU Yuanyuan, LI Shuai, LIANG Gang, ZHANG Yanan, HU Qingxi. Gel fraction and swelling degree of hollow alginate fiber fabricated by direct writing and crosslinking [J]. CIESC Journal, 2014, 65(12): 5090-5096.
[8]	ZHOU Qi,LI Wei,SHI Yuli,JIANG Binbo,WANG Jingdai,YANG Yongrong. Blending properties of polyethylene blends obtained by hybrid catalyst immobilizing on composite support [J]. CIESC Journal, 2012, 63(6): 1735-1741.
[9]	Feng Ziping, Guo Liejin, Chen Xuejun and Sun Jufeng(National Laboratory of Multiphase Flout in Power Engineering) (Xian Jiantong University, Xian 710049). DRYOUT CHARACTERISTICS IN HORIZONTAL HELICALLY COILED TUBE [J]. , 1997, 48(2): 180-185.
[10]	Xu Songlin,Wang Shuying and Yu Guocong(K.T. Yu)(Chemical Engineering Research Center, Tianjin University, Tianjin 300072). LOCAL CONTRIBUTION METHOD FOR PLATE EFFICIENCY [J]. , 1997, 48(2): 241-246.
[11]	Hu Zexin(Research Institute of Automatic Control , East China University of Science and Technology , Shanghai 200237)Lu Xiwen(Department oj Mathematics, East China University oj Science and Technolgy, Shanghai 200237)Min Huaqing(Department of Automatic Control, Wuhan Institute oj Chemical Technolgy, Wuhan 430073). ADAPTIVE OBSERVER AND NONLINEAR CONTROL STRATEGY FOR CHEMICAL REACTORS VIA NEURAL NETWORKS [J]. , 1995, 46(2): 144-151.
[12]	Xu Zhiming and Yang Shanrang(Department of Thermal Power Engineering,Northeast China Institute of Electric Power Engineering , Jilin 132012)Chen Zhongqi(Department of Thermal Power Engineering ,Xi an Jiaotong University,Xian 710049). VARIATIONAL SOLUTION OF OPTIMUM PARAMETER DISTRIBUTIONS IN HEAT EXCHANGER [J]. , 1995, 46(1): 75-80.

THE APPROXIMATE AND PLAUSIBLE REASONING FOR ON-STREAM INSPECTION AND FAULT DIAGNOSIS IN PROCESS EQUIPMENT

化工装置在线检查诊断中的非精确性推理

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 12

Recommended Articles

Metrics

Comments