CIESC Journal ›› 2014, Vol. 65 ›› Issue (2): 460-467.DOI: 10.3969/j.issn.0438-1157.2014.02.013

Previous Articles     Next Articles

Heat transfer characteristics during flow boiling of liquid nitrogen in vertical tube

XU Bin1, SHI Yumei1, CHEN Dongsheng1, YU Zhongjie2   

  1. 1 Institue of Refrigeration and Cryogenics Engineering, Shanghai Jiao Tong University, Shanghai 200240, China;
    2 Zhanjiang Equipment Motor Repair Team, South China Sea Fleet, Zhanjiang 524000, Guangdong, China
  • Received:2013-04-26 Revised:2013-07-27 Online:2014-02-05 Published:2014-02-05

竖直圆管内液氮流动沸腾传热特性的分析

徐彬1, 石玉美1, 陈东升1, 于忠杰2   

  1. 1 上海交通大学制冷与低温工程研究所, 上海 200240;
    2 南海舰队湛江装备机动修理队, 广东 湛江 524000
  • 通讯作者: 石玉美

Abstract: This paper presents an experimental investigation on the heat transfer characteristics of liquid nitrogen flow boiling in a vertical tube. The variations of wall temperature, fluid temperature, quality, and heat transfer coefficient in the flow direction were analyzed. The effect of heat flux, inlet pressure and mass flux on the flow boiling heat transfer coefficients was examined. Four correlations by Chen, Klimenko, Shah, and Liu-Winterton were adopted to predict the flow boiling heat transfer coefficient. The relative errors in different ranges of heat transfer coefficients were calculated and analyzed to evaluate the correlations under the experimental conditions. The predicted results show that the results calculated with the four correlations are generally lower than the experimental data. The Klimenko correlations are more adaptable under the whole experimental conditions.

Key words: flow boiling, liquid nitrogen, two-phase flow, heat transfer, vaporization

摘要: 实验研究了竖直圆管内液氮流动沸腾传热特性,分析壁面温度、流体温度、干度以及传热系数沿实验段管程的变化规律,考察热通量、质量流量和入口压力对液氮两相流动传热特性的影响。针对实验工况分别采用Chen、Klimenko、Shah以及Liu-Winterton关联式对传热系数进行预测,并将实验结果与预测结果进行比较,对不同传热系数区间内的相对误差进行了计算、分析,以评估实验工况范围内各关联式的准确性。结果表明,在传热系数较大的情况下,4个关联式的预测值普遍低于实验值,在整个实验工况范围内,采用Klimenko关联式预测时误差最小。

关键词: 流动沸腾, 液氮, 两相流, 传热, 汽化

CLC Number: