CIESC Journal ›› 2023, Vol. 74 ›› Issue (9): 3921-3930.DOI: 10.11949/0438-1157.20230461

• Energy and environmental engineering • Previous Articles     Next Articles

Study on solar thermoelectric power generation characteristics based on selective absorption nanofilm

Cong QI(), Zi DING, Jie YU, Maoqing TANG, Lin LIANG   

  1. School of Low-carbon Energy and Power Engineering, China University of Mining and Technology, Xuzhou 221116, Jiangsu, China
  • Received:2023-05-12 Revised:2023-09-02 Online:2023-11-20 Published:2023-09-25
  • Contact: Cong QI

基于选择吸收纳米薄膜的太阳能温差发电特性研究

齐聪(), 丁子, 余杰, 汤茂清, 梁林   

  1. 中国矿业大学低碳能源与动力工程学院,江苏 徐州 221116
  • 通讯作者: 齐聪
  • 作者简介:齐聪(1983—),男,博士,副教授,qicong@cumt.edu.cn
  • 基金资助:
    中央高校基本科研业务费专项(2020ZDPY0215)

Abstract:

In order to improve the efficiency of solar thermoelectric power generation, this paper designs a new thermoelectric power generation device based on selective absorption nanofilm. The effects of light intensity and light angle on its performance were studied, and a comparative study was conducted with a thermoelectric generator based on commercial solar paint. The results showed that compared to commercial solar coating-based thermoelectric generators, adopting selective absorption nanofilms as the heat-absorbing layer can effectively increase the output power of the system, the temperature difference between the hot and cold ends of the temperature differential power generation sheet can be increased by 1—2℃, and the output power can be increased by up to 42.6% under low light intensity conditions.

Key words: solar energy, thermoelectric power generation, nanofilm, heat transfer, optimal design

摘要:

为提高太阳能温差发电效率,设计了一种基于选择吸收纳米薄膜新型温差发电装置。研究了光照强度、光照角度对其性能的影响,并与基于商用太阳能涂料的温差发电器进行了对比研究。结果表明:与基于商用太阳能涂料的温差发电器相比,采用选择吸收纳米薄膜作为吸热层可有效提高系统的输出功率,温差发电片的冷热端温差可提高1~2℃,且在低光照强度条件下最高可提高42.6%的输出功率。

关键词: 太阳能, 温差发电, 纳米薄膜, 传热, 优化设计

CLC Number: