化工学报 ›› 2009, Vol. 60 ›› Issue (3): 615-619.

• 多相流和计算流体力学 • 上一篇    下一篇

气固两相流静电相关测速参数选取方法

李良;王超;张文彪;闫勇   

  1. 天津市过程检测与控制重点实验室,天津大学电气与自动化工程学院;郑州电子信息工程学校;Department of Electronics,University of Kent
  • 出版日期:2009-03-05 发布日期:2009-03-05

Parameter selection method of electrostatic correlation velocimetry for gas-solids flow

LI Liang;WANG Chao;ZHANG Wenbiao;YAN Yong   

  • Online:2009-03-05 Published:2009-03-05

摘要: 针对静电相关测速缺乏系统的参数选取依据的问题,本文通过对渡越时间测量误差的分析,结合实际应用要求,系统归纳了相关运算中采样频率和积分时间的选取原则及步骤,并构建了基于虚拟仪器的静电相关实验平台,验证了静电相关参数选取原则的合理性。

关键词:

静电相关测速, 气固两相流, 采样频率, 积分时间, 实验平台

Abstract:

Aimed at the lack of systematic parameter selection reference in the electrostatic correlation based velocity measurement,the principle and steps in choosing the sampling frequency and integral time were established,which took the analysis in the measurement error of transit time and the real application requirement into account. Besides,an experiment platform was built by using the real sensor and virtual instrument software. Using this platform,the principle in selecting the parameters in the electrostatic correlation based velocity measurement was proven.

Key words:

静电相关测速, 气固两相流, 采样频率, 积分时间, 实验平台