化工学报 ›› 2009, Vol. 60 ›› Issue (6): 1380-1384.

• 传递现象 • 上一篇    下一篇

椭圆管矩形翅片空冷器流体流动与传热特性数值分析

明廷臻;党艳辉;刘伟;黄素逸   

  1. 华中科技大学能源与动力工程学院
  • 出版日期:2009-06-05 发布日期:2009-06-05

Numerical analysis of fluid flow and heat transfer characteristics on elliptical tube with rectangular fins of air cooler

MING Tingzhen;DANG Yanhui;LIU Wei;HUANG Suyi   

  • Online:2009-06-05 Published:2009-06-05

摘要:

对电站空冷器椭圆管矩形翅片空气侧的流动与传热特性进行了数值模拟,分析了翅片间距、翅片厚度、迎面风速以及环境温度对翅片侧流体与壁面之间的表面传热系数以及流动阻力的影响。数值模拟结果表明:随着迎面风速的增加,表面传热系数和流动阻力显著增加;翅片间距对表面传热系数影响不大,但对流动阻力和总散热量的影响显著;表面传热系数和流动阻力随翅片厚度的增加呈单调增加的趋势。本文数值模拟结果可为电站空冷器的设计与实验提供参考。

关键词:

空冷器, 椭圆管, 传热系数, 流动阻力, 数值模拟

Abstract:

Numerical calculations were performed to analyze the characteristics of air flow and heat transfer inside the elliptical tube finned channels of air cooler used in power stations,and the effects of fin pitch,fin thickness,head wind air velocity and ambient temperature on heat transfer coefficient and flow resistance were discussedNumerical simulation results showed that both heat transfer coefficient and pressure drop increased with the increase of head wind air velocity.The fin pitch had little effect on heat transfer coefficient,but had a significant effect on pressure drop and the total amount of heat transfer inside the finned channelsIn addition,the heat transfer coefficient and pressure drop increased with the increase of fin thicknessThe results will provide a reference to the design and experiment of the air coolers used for the power stations.

Key words:

空冷器, 椭圆管, 传热系数, 流动阻力, 数值模拟