基于有偏估计的数据融合提高双传感器测量可靠性

doi:10.3969/j.issn.0438-1157.2014.04.019

化工学报 ›› 2014, Vol. 65 ›› Issue (4): 1287-1295.DOI: 10.3969/j.issn.0438-1157.2014.04.019

基于有偏估计的数据融合提高双传感器测量可靠性

左信, 岳元龙, 罗雄麟

中国石油大学自动化系, 北京 102249

收稿日期:2013-07-19 修回日期:2013-08-26 出版日期:2014-04-05 发布日期:2013-11-27
通讯作者: 罗雄麟
作者简介:左信（1964—），男，教授。
基金资助:
国家自然科学基金项目（21006127）。

Improving reliability of bi-sensors measurement based on biased estimation data fusion

ZUO Xin, YUE Yuanlong, LUO Xionglin

Department of Automation, China University of Petroleum, Beijing 102249, China

Received:2013-07-19 Revised:2013-08-26 Online:2014-04-05 Published:2013-11-27
Supported by:
supported by the National Natural Science Foundation of China (21006127).

摘要/Abstract

摘要： 为了提高测量数据可靠性，过程控制领域广泛采用双冗余传感器测量生产状态信息，而目前处理双传感器测量数据常用的方法为线性无偏估计融合理论。通过估计理论得到的测量数据同时涉及方差和偏差两个统计特性。由于无偏测量数据具有无偏性的优良性质，所以测量方差能够全面地描述无偏测量数据的可靠性，然而不能由此认为无偏测量数据一定具有高可靠性。为了进一步提高双传感器测量数据的可靠性，提出有偏估计数据融合方法。首先，证明了有偏测量能够改善单传感器测量数据的可靠性；其次，采用凸组合方法推导了双传感器有偏估计融合表达式；最后，证明了有偏估计融合的均方误差小于任意单传感器的均方误差。仿真分析与实例应用均表明有偏估计数据融合可以有效地提高双传感器测量数据的可靠性。

关键词: 测量, 双传感器, 可靠性, 有偏估计, 数据融合

Abstract: For the sake of improving the reliability of measured data, the bi-sensors data fusion method is widely applied to obtain the information on product status in the process control field, and the linearly unbiased estimation theory used as the data fusion method is widely adopted to deal with measurement data. For any estimation process, both variance and bias are the significant indices evaluating the performance of the measurement data. Because the unbiased measurement data possesses unbiased merit, variance can be used to represent the reliability of the unbiased measurement data. However, we can not believe that the unbiased measurement data must be highly reliable. In order to enhance the measurement reliability of the bi-sensors, a novel data fusion method arising from biased estimation was proposed. First, the conclusion that biased measurement could increase the reliability of a single-sensor was proved. Second, the convex combination method was used to derive biased estimation data fusion given the bi-sensors. Finally, the conclusion that the proposed fusion process was always superior to single-sensor measurement in terms of mean square error was proved. Simulation and application in a real plant illustrated that the biased estimation fusion could improve the reliability of the measured data effectively.

Key words: measurement, bi-sensors, reliability, biased estimation, data fusion

中图分类号:

TB114.3
TB22

左信, 岳元龙, 罗雄麟. 基于有偏估计的数据融合提高双传感器测量可靠性[J]. 化工学报, 2014, 65(4): 1287-1295.

ZUO Xin, YUE Yuanlong, LUO Xionglin. Improving reliability of bi-sensors measurement based on biased estimation data fusion[J]. CIESC Journal, 2014, 65(4): 1287-1295.

参考文献

[1] Azlan Hussain M. Review of the applications of neural networks in chemical process control—simulation and online implementation[J]. Artificial Intelligence in Engineering, 1999, 13(1): 55-68
[2] Shen Zhi(沈植), Yang Dong(杨冬), Chen Gongming(陈功名), Xiao Feng(肖峰). Heat transfer characteristics of high temperature and pressure water in vertical downward tube[J]. CIESC Journal (化工学报), 2013, 64(7): 2386-2393
[3] Ren Congjing(任聪静), Wang Jingdai(王靖岱), Zhang Xiaohuan(张晓欢), Yang Yongrong(阳永荣). Measurement of slurry suspension height in stirred tank by multi-scale analysis of acoustic emission technology[J].Journal of Chemical Industry and Engineering (China) (化工学报), 2008, 59(6): 1383-1389
[4] Zhang J. Improved on-line process fault diagnosis through information fusion in multiple neural networks[J].Computers & Chemical Engineering, 2006, 30(3): 558-571
[5] Deng X G, Tian X M. Sparse kernel locality preserving projection and its application in nonlinear process fault detection[J]. Chinese Journal of Chemical Engineering, 2013, 21(2): 163-170
[6] Bai Rui(白锐), Chai Tianyou(柴天佑). Optimization control of ball mill load in blending process with data fusion and case-based reasoning[J]. CIESC Journal (化工学报), 2009, 60(7): 1746-1752
[7] Yue Yuanlong, Zuo Xin, Luo Xionglin. Confidence level based on ridge estimator in process measurements and its application[J]. Chinese Journal of Chemical Engineering, 2013，21(10):1144-1154
[8] Feng Z G, Teo K L, Ahmed N U, Zhao Y, Yan W Y. Optimal fusion of sensor data for discrete Kalman filtering[J]. Dynamic Systems and Applications, 2007, 16(2): 393-406
[9] Gan Q, Harris C J. Comparison of two measurement fusion methods for Kalman-filter-based multisensor data fusion[J]. IEEE Transactions on Aerospace and Electronic Systems, 2001, 37(1): 273-279
[10] Caron F, Duflos E, Pomorski D, Vanheeghe P. GPS/IMU data fusion using multisensor Kalman filtering: introduction of contextual aspects[J]. Information Fusion, 2006, 7(2): 221-230
[11] Salahshoor K, Mosallaei M, Bayat M. Centralized and decentralized process and sensor fault monitoring using data fusion based on adaptive extended Kalman filter algorithm[J]. Measurement, 2008, 41(10): 1059-1076
[12] Chang K C, Zhi T, Saha R K. Performance evaluation of track fusion with information matrix filter[J]. IEEE Transactions on Aerospace and Electronic Systems, 2002, 38(2): 455-466
[13] Gao J B, Harris C J. Some remarks on Kalman filters for the multisensor fusion[J]. Information Fusion, 2002, 3(3): 191-201
[14] Benaskeur A R. Consistent fusion of correlated data sources//IEEE 28th Annual Conference of the Industrial Electronics Society[C]. 2002, 4: 2652-2656
[15] Kennedy H L. Fusion of possibly biased location estimates using Gaussian mixture models[J]. Information Fusion, 2012, 13(3): 214- 222
[16] Uhlmann J K. Covariance consistency methods for fault-tolerant distributed data fusion[J]. Information Fusion, 2003, 4(3): 201-215
[17] Zervas E, Mpimpoudis A, Anagnostopoulos C, Sekkas O, Hadjiefthymiades S. Multisensor data fusion for fire detection[J]. Information Fusion, 2011, 12(3): 150-159
[18] Yue Yuanlong(岳元龙)，Zuo Xin(左信)，Luo Xionglin(罗雄麟). Improving measurement reliability based on biased estimation[J]. CIESC Journal (化工学报),2013，64(9):3270-3276
[19] Qiu H Z, Zhang H Y, Jin H. Fusion algorithm of correlated local estimates[J]. Aerospace Science and Technology, 2004, 8(7): 619-626

基于有偏估计的数据融合提高双传感器测量可靠性

Improving reliability of bi-sensors measurement based on biased estimation data fusion

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	仪显亨, 周骛, 蔡小舒, 蔡天意. 光纤后向动态光散射测量纳米颗粒的浓度适用范围研究[J]. 化工学报, 2023, 74(8): 3320-3328.
[2]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.
[3]	邵伟明, 韩文学, 宋伟, 杨勇, 陈灿, 赵东亚. 基于分布式贝叶斯隐马尔可夫回归的动态软测量建模方法[J]. 化工学报, 2023, 74(6): 2495-2502.
[4]	陈俊先, 姬忠礼, 赵瑜, 张倩, 周岩, 刘猛, 刘震. 基于微波技术的天然气管道内颗粒物在线检测方法研究[J]. 化工学报, 2023, 74(3): 1042-1053.
[5]	王永倩, 王平, 程康, 毛晨林, 刘文锋, 尹智成, Ferrante Antonio. 氨气/甲烷贫预混旋转湍流火焰稳定性及NO生成[J]. 化工学报, 2022, 73(9): 4087-4094.
[6]	刘碧强, 曹海山. 基于流量校准的吸附测量方法及误差分析[J]. 化工学报, 2022, 73(4): 1597-1605.
[7]	兰文杰, 胡晓洁, 蔡迪宗. 界面探针法测量液滴与固体壁面间相互作用力[J]. 化工学报, 2022, 73(3): 1119-1126.
[8]	孙裕坤, 杨焘, 吴江涛. R32+R1234yf+R1234ze（E）混合制冷剂气液相平衡实验研究[J]. 化工学报, 2022, 73(3): 1063-1071.
[9]	罗顺桦, 王振雷, 王昕. 基于二子空间协同训练算法的半监督软测量建模[J]. 化工学报, 2022, 73(3): 1270-1279.
[10]	张家庆, 刘朝晖, 李宇, 宋晨阳. 碳氢燃料JP-10高温液态黏度测量和推算模型构建方法研究[J]. 化工学报, 2022, 73(1): 153-161.
[11]	刘曙光, 钟文琪, 陈曦. 基于XCT的气固流化床布风板射流特征研究[J]. 化工学报, 2021, 72(9): 4553-4563.
[12]	刘聪, 谢莉, 杨慧中. 基于改进DPC的青霉素发酵过程多模型软测量建模[J]. 化工学报, 2021, 72(3): 1606-1615.
[13]	陈忠圣, 朱梅玉, 贺彦林, 徐圆, 朱群雄. 基于分位数回归CGAN的虚拟样本生成方法及其过程建模应用[J]. 化工学报, 2021, 72(3): 1529-1538.
[14]	黄正梁, 王超, 郭燕妮, 杨遥, 孙婧元, 王靖岱, 阳永荣. 基于停留时间分布的缠绕管内二次流研究[J]. 化工学报, 2021, 72(2): 921-927.
[15]	汪恺, 杜文莉, 隆建. 在线自适应波长选择方法及其在汽油调和过程中的应用[J]. 化工学报, 2021, 72(2): 1059-1066.