热水型PV/T组件结构参数的敏感性分析

doi:10.3969/j.issn.0438-1157.2014.z2.035

化工学报 ›› 2014, Vol. 65 ›› Issue (z2): 235-239.DOI: 10.3969/j.issn.0438-1157.2014.z2.035

热水型PV/T组件结构参数的敏感性分析

孙亮亮¹, 袁艳平¹, 胡文举², 曹晓玲¹, 雷波¹

1. 西南交通大学机械工程学院, 四川成都 610031;
2. 北京建筑大学供热供燃气通风及空调工程北京市重点实验室, 北京 100044

收稿日期:2014-09-02 修回日期:2014-09-10 出版日期:2014-12-30 发布日期:2014-12-30
通讯作者: 袁艳平
基金资助:
中央高校基本科研业务费专项资金;供热供燃气通风及空调工程北京市重点实验室研究基金项目(NR2013K08)。

Sensitivity analysis of configuration parameters of water-type PV/T module

SUN Liangliang¹, YUAN Yanping¹, HU Wenju², CAO Xiaoling¹, LEI Bo¹

1. School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, Sichuan, China;
2. Beijing Key Lab of Heating, Gas Supply, Ventilating and Air Conditioning Engineering, Beijing University of Civil Engineering and Architecture, Beijing 100044, China

Received:2014-09-02 Revised:2014-09-10 Online:2014-12-30 Published:2014-12-30
Supported by:
supported by the Fundamental Research Funds for the Central Universities and Beijing Key Lab of Heating, Gas Supply, Ventilating and Air Conditioning Engineering (NR2013K08).

摘要/Abstract

摘要：

采用归一化敏感系数法对热水型PV/T组件的主要结构参数(盖板玻璃厚度、空气腔厚度、集热板厚度、水管直径、水管间距和保温材料厚度)进行了敏感性分析。研究了太阳辐射值、室外温度和流速对各结构参数敏感系数的影响规律。结果表明,盖板玻璃厚度、水管直径和水管间距是影响热水型PV/T组件发电量和热水得热量的显著性参数。与太阳辐射值和流速相比,室外温度对结构参数的敏感系数影响不明显。

关键词: 热水型PV/T组件, 敏感性分析, 结构参数, 归一化敏感系数法

Abstract:

The sensitivity analysis of main configuration parameters of water-type PV/T module including thickness of cover glass, thickness of air gap, thickness of thermal absorber, diameter of water tube, spacing of water tube and thickness of thermal insulation material has been conducted using normalized sensitivity coefficient method. The impact of solar radiation, outdoor air temperature and flow rate on sensitivity coefficients of these configuration parameters are also investigated. It indicates that thickness of cover glass, diameter of water tube and spacing of water tube are significant influence parameters in term of electrical power generation and thermal heat for hot water. Compared with solar radiation and flow rate, effect of outdoor air temperature on sensitivity coefficients is not obvious.

Key words: water-type PV/T module, sensitivity analysis, configuration parameter, normalized sensitivity coefficient method

中图分类号:

TK519

孙亮亮, 袁艳平, 胡文举, 曹晓玲, 雷波. 热水型PV/T组件结构参数的敏感性分析[J]. 化工学报, 2014, 65(z2): 235-239.

SUN Liangliang, YUAN Yanping, HU Wenju, CAO Xiaoling, LEI Bo. Sensitivity analysis of configuration parameters of water-type PV/T module[J]. CIESC Journal, 2014, 65(z2): 235-239.

参考文献 15

[1]	Huang B J. Solar photovoltaic/thermal co-generation collector//Proceedings of the ISES 1999 Solar World Congress [C].Jerusalem, Israel, 1999
[2]	Zondag H A, de Vries D W, van Helden W G J, van Zolingen R J C, van Steenhoven A A. The yield of different combined PV-thermal collector designs [J]. Solar Energy, 2003, 74: 253-269
[3]	Dubey S, Tiwari G N. Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater [J]. Solar Energy, 2008, 82: 602-612
[4]	Ji J, Chow T T, He W. Dynamic performance of hybrid photovoltaic/thermal collector wall in Hong Kong [J]. Applied Energy, 2003, 83: 42-54
[5]	Ji J, Han J, Chow T T, Yi H, Lu J P, He W, Sun W. Effect of fluid flow and packing factor on energy performance of a wall-mounted hybrid photovoltaic/water-heating collector system [J]. Energy and Buildings, 2006, 38: 1380-1387
[6]	Ji J, Lu J P, Chow T T, He W, Pei G. A sensitivity study of a hybrid photovoltaic/thermal water-heating system with natural circulation [J]. Applied Energy, 2007, 84: 222-237
[7]	Chow T T, Pei G, Fong K F, Lin Z, Chan A L S, Ji J. Energy and exergy analysis of photovoltaic-thermal collector with and without glass cover [J]. Applied Energy, 2009, 86: 310-316
[8]	Chow T T, Chan A L S, Fong K F, Lin Z, Ji J. Annual performance of building-integrated photovoltaic/water-heating system for warm climate application [J]. Applied Energy, 2009, 86: 689-696
[9]	Tripanagnostopoulos Y. Aspects and improvements of hybrid photovoltaic/thermal solar energy systems [J]. Solar Energy, 2007, 81: 1117-1131
[10]	Santbergen R, Rindt C C M, Zondag H A, Zolingen R J C. Detailed analysis of the energy yield of systems with covered sheet-and-tube PVT collectors [J]. Solar Energy, 2010, 84: 867-878
[11]	Anderson T N, Duke M, Morrison G L, Carson J K. Performance of a building integrated photovoltaic/thermal (BIPVT) solar collector [J]. Solar Energy, 2009, 83: 445-455
[12]	Kalogirou S A, Tripanagnostopoulos Y. Hybrid PV/T solar systems for domestic hot water and electricity production [J]. Energy Conversion and Management, 2006, 47: 3368-3382
[13]	Xu Guoying(徐国英), Zhang Xiaosong(张小松), Zhao Shanguo(赵善国). Performance of flat-plate PV/T integrated heat pump water heating system [J]. CIESC Journal(化工学报), 2012, 63(S2): 136-141
[14]	Mishra R K, Tiwari G N. Energy and exergy analysis of hybrid photovoltaic thermal water collector for constant collection temperature mode [J]. Solar Energy, 2013, 90: 58-67
[15]	QureshiBilal A, Zubair M. A comprehensive design and rating study of evaporative coolers and condensers (Ⅱ): Sensitivity analysis [J]. International Journal of Refrigeration, 2006, 29: 659-668

热水型PV/T组件结构参数的敏感性分析

Sensitivity analysis of configuration parameters of water-type PV/T module

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 15

相关文章 15

编辑推荐

Metrics

本文评价

[1]	许晓东, 马晨波, 孙见君, 张玉言, 於秋萍. 基于最优传质系数的槽型结构参数对液膜机械密封汽化特性影响及优化[J]. 化工学报, 2022, 73(3): 1147-1156.
[2]	吴一, 温小萍, 张素梅, 郭志东, 邓浩鑫, 纪文涛. 垂直圆管内掺氢甲烷燃烧不稳定性研究[J]. 化工学报, 2022, 73(10): 4780-4790.
[3]	赵兰萍, 郭本涛, 杨志刚. 车用热泵内部冷凝器结构对性能的影响[J]. 化工学报, 2021, 72(9): 4616-4628.
[4]	李敬, 杜刚, 殷娟娟. 退役电池回收产业现状及经济性分析[J]. 化工学报, 2020, 71(S1): 494-500.
[5]	罗振敏, 苏彬, 王涛, 程方明. C₂H₆/C₃H₈影响CH₄爆炸极限参数及动力学特性研究[J]. 化工学报, 2019, 70(9): 3601-3615.
[6]	高兴辉, 周帼彦, 涂善东. 缠绕管式换热器壳程强化传热性能影响因素分析[J]. 化工学报, 2019, 70(7): 2456-2471.
[7]	陈传刚, 丁雪兴, 陆俊杰, 张伟政, 陈金林. 摩擦副界面微造型序列对气体密封性能的影响[J]. 化工学报, 2019, 70(3): 1016-1026.
[8]	杨文静, 郝木明, 曹恒超, 袁俊马, 李晗. 基于质量守恒边界条件的下游泵送螺旋槽液膜密封空化分析[J]. 化工学报, 2018, 69(9): 3932-3943.
[9]	丁雪兴, 贺振泓, 张伟政, 陆俊杰, 苗春昊. 柱面螺旋槽气膜密封微尺度流动场稳态特性分析[J]. 化工学报, 2018, 69(4): 1537-1546.
[10]	王潇敏, 程文龙, 张利嵩, 刘娜. 树脂基热防护材料烧蚀传热的关键参数影响性分析[J]. 化工学报, 2018, 69(4): 1385-1390.
[11]	赵书威, 何涛, 李雪梅, 高从堦, Ho Kyong Shon, Long D Nghiem, Menachem Elimelech. 国际正渗透膜技术研讨会IFOS2016回顾：正渗透可行吗?[J]. 化工学报, 2018, 69(4): 1255-1260.
[12]	李玉星, 常学煜, 朱建鲁, 韩辉, 孙崇正, 董龙飞, 陈杰, 曾伟平. 双混合制冷剂天然气液化过程实验分析[J]. 化工学报, 2017, 68(5): 2122-2131.
[13]	仇明华, 刘万强, 陈冠凡, 刘凤萍, 岳明. 用振动力学有限元分析方法估算多类烃的液体热导率[J]. 化工学报, 2016, 67(7): 2672-2678.
[14]	袁小军, 鲁毅, 郑士富. 在役LNG接收站的SIS系统再验证[J]. 化工学报, 2015, 66(S2): 271-278.
[15]	潘红宇, 李玉星, 朱建鲁. 丙烷预冷混合制冷剂液化工艺原料气敏感性分析[J]. 化工学报, 2015, 66(S2): 186-191.