化工学报 ›› 2019, Vol. 70 ›› Issue (S1): 211-216.DOI: 10.11949/j.issn.0438-1157.20190062

• 材料化学工程与纳米技术 • 上一篇    下一篇

羧酸金属盐β晶型成核剂合成及应用研究

赵文林(),何洁冰()   

  1. 呈和科技股份有限公司,广东 广州 510540
  • 收稿日期:2019-01-18 修回日期:2019-02-20 出版日期:2019-03-31 发布日期:2019-03-31
  • 通讯作者: 何洁冰
  • 作者简介:<named-content content-type="corresp-name">赵文林</named-content>(1964—),男,高级工程师,<email>zhaowl@gchchem.com</email>|何洁冰(1964—),女,高级工程师,<email>hejb@ gchchem.com</email>

Synthesis and application of carboxylic acid metal salt beta crystal nucleating agent

Wenlin ZHAO(),Jiebing HE()   

  1. GCH Technology Co., Ltd., Guangzhou 510540, Guangdong, China
  • Received:2019-01-18 Revised:2019-02-20 Online:2019-03-31 Published:2019-03-31
  • Contact: Jiebing HE

摘要:

研究开发了一种新型的羧酸金属盐β晶型成核剂。此成核剂不仅高效诱导β-PP形成,而且成核效率高, β-成核PP的冲击强度可提高2~4倍,并且大幅提高PP热变形温度,有效缓解了聚丙烯制品的冲击强度和热变形温度二者之间的矛盾。目前已在PPR管材和PPH板材、大注件制品以及锂电池隔膜方面得到广泛的应用。

关键词: 聚丙烯, 羧酸金属盐, β晶成核剂

Abstract:

A new type of carboxylic acid metal salt β-crystalline nucleating agent is developed. It is a new compound. This nucleating agent not only efficiently induces the formation of β-PP, but also has a high nucleation efficiency. The impact strength of β-nucleating PP can be increased by 2 to 4 times, and the heat deformation temperature of PP can be greatly increased. The contradiction between the impact strength and the thermal deformation temperature of polypropylene products is effectively relieved. At present, it has been widely used in PPR tubes and PPH plates, large injection products, and lithium battery diaphragm.

Key words: polypropylene, carboxylate, β-nucleating agent

中图分类号: