CIESC Journal ›› 2015, Vol. 66 ›› Issue (8): 2824-2830.DOI: 10.11949/j.issn.0438-1157.20150662

Previous Articles     Next Articles

Perspective on cold plasma-induced self-assembly biomolecules approach to biomaterials

PAN Yunxiang1, 2, SUN Zhengqing2, DUAN Mingyu2, LIU Changjun1   

  1. 1 Collaborative Innovation Centre of Chemical Science and Engineering, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
    2 School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei 230009, Anhui, China
  • Received:2015-05-21 Revised:2015-05-28 Online:2015-08-05 Published:2015-08-05
  • Supported by:

    supported by the National Natural Science Foundation of China (91334206).

冷等离子体诱导生物分子自组装制备生物材料研究进展

潘云翔1, 2, 孙正庆2, 段明宇2, 刘昌俊1   

  1. 1 天津大学化工学院, 天津化学化工协同创新中心, 天津 300072;
    2 合肥工业大学化学与化工学院, 安徽 合肥 230009
  • 通讯作者: 刘昌俊
  • 基金资助:

    国家自然科学基金项目重大研究计划重点支持项目(91334206)。

Abstract:

The biomaterials are promising for water treatment, gas sensor, energy storage and photocatalysis. However, the traditional preparation processes of the biomaterials are complex, and require toxic organic reagents. Simple and green preparation methods for biomaterials are highly desired. The cold plasma-induced self-assembly of biomolecules at room temperature is simple and green, as it does not use organic reagent, and does not require calcinations, H2 reduction, chemical reduction and photoinduced reduction. By using the plasma-induced self-assembly, biofilm with a height of (1.03±0.14)nm and metal/biomaterial composites with highly dispersed metal nanoparticles (< 10 nm) have been successfully fabricated. However, many fundamental issues about the cold plasma-induced self-assembly, especially its mechanism, are still unsolved. A deep understanding on these problems will allow for controllable and massive syntheses of biomaterials.

Key words: nanomaterial, peptide, biofilm, cold plasma, self-assembly

摘要:

生物材料在污水处理、气体检测、储能、光催化等领域展现出良好的应用前景。但传统生物材料制备方法复杂,且使用高毒性有机溶剂。实现简单、绿色的生物材料制备是目前亟需解决的问题。室温下冷等离子体诱导生物分子自组装制备生物材料,不需有机溶剂,不需高温焙烧、H2还原、化学还原和光致还原,实现了生物材料制备过程的简单化、绿色化。通过冷等离子体诱导生物分子自组装已制备出厚度为(1.03±0.14)nm的生物膜以及含有尺寸小于10 nm、分散性极好的金属纳米颗粒的金属/生物复合材料。但相关研究刚起步,许多科学问题仍然未知,特别是冷等离子体诱导生物分子自组装机理需进一步研究。这些科学问题一旦得到完美诠释,必定会实现生物材料的可控、宏量制备。

关键词: 纳米材料, 肽, 生物膜, 冷等离子体, 自组装

CLC Number: