CIESC Journal ›› 2017, Vol. 68 ›› Issue (S1): 111-116.DOI: 10.11949/j.issn.0438-1157.20170420

Previous Articles     Next Articles

Surface transport characteristic of leakage contaminant of buried petroleum pipelines

WU Guozhong, WANG Di, ZHAO Wenhao, LI Dong, LI Hongjia, QI Hanbing   

  1. School of Civil Engineering and Architecture, Northeast Petroleum University, Daqing 163318, Heilongjiang, China
  • Received:2017-04-18 Revised:2017-04-27 Online:2017-08-31 Published:2017-08-31
  • Supported by:

    supported by the Petroleum Science and Technology Innovation Foundation of China (2015D-5006-0605) and the Natural Science Foundation of Heilongjiang Province(JJ2016ZR0314).

埋地输油管道泄漏污染物地表运移特征

吴国忠, 王迪, 赵文浩, 李栋, 李宏佳, 齐晗兵   

  1. 东北石油大学土木建筑工程学院, 黑龙江 大庆 163318
  • 通讯作者: 李栋,lidonglvgan@126.com
  • 基金资助:

    中国石油科技创新基金项目(2015D-5006-0605);黑龙江省自然科学基金项目(JJ2016ZR0314)。

Abstract:

The leakage of petroleum pipelines has been widely concerned by people and surface transport characteristic of leakage contaminant is the basis of petroleum pipeline leakage detection technology application. This paper established a two-dimensional mathematical-physical model of buried petroleum pipelines leakage,and aimed at the surface transport process of leakage contaminant of buried petroleum pipelines,using the numerical simulation software,it is studied on the effect of different leakage aperture and location for the surface transport characteristic of leakage contaminant of buried petroleum pipelines. The results showed that at the early stage of leakage,the resistance of contaminant is uniform lead to it uniformly transport near areas around with fast speed and gradually decreased in later stage. It would reach the surface faster if the leakage aperture is more larger and the leakage location is more nearer the surface and the surface transport characteristics are more obvious at larger maximum horizontal displacement.

Key words: petroleum pipelines, leakage aperture, leakage location, surface characteristic, transport, model, simulation

摘要:

输油管道泄漏受到人们广泛的关注,泄漏污染物地面特征是输油管道泄漏检测技术应用的基础。建立了埋地输油管道泄漏二维模型,模拟埋地输油管道泄漏污染物地表运移过程,研究不同泄漏孔径和位置对埋地输油管道泄漏污染物地表运移特征的影响。结果发现:泄漏初期,污染物所受阻力均匀,向四周均匀迁移,而且迁移速度前期快,后期逐渐减小;泄漏孔径越大、泄漏孔位置越靠近地表,石油污染物到达地表的时间越短,水平最大位移量越大,地表特征越明显。

关键词: 输油管道, 泄漏孔径, 泄漏位置, 地面特征, 传递, 模型, 模拟

CLC Number: