[1] Bernardi, D.M., Verbrugge, M.W., "A mathematical model of the solid-polymer-electrolyte fuel cell", J. Electrochem.Soc., 139, 2477-2491 (1992). [2] Springer, T.E., Zawodzinski, T.A., Gottesfeld, S., "Polymer electrolyte fuel cell model", J. Electrochem. Soc., 138,2334-2342 (1991). [3] Fuller, T.F., Newman, J., "Water and thermal management in solid-polymer-electrolyte fuel cells", J. Electrochem.Soc., 140, 1218-1224 (1993). [4] Nguyen, T.V., White, R.E., "A water and heat management model for proton-exchange- membrane fuel cells", J.Electrochem. Soc., 140, 2178-2186 (1993). [5] Yi, J.S., Nguyen, T.V., "An along-the-channel model for proton exchange membrane fuel cells", J. Electrochem.Soc., 145, 1149-1159 (1998). [6] Gurau, V., Liu, H., Kakac, S., "Two-dimensional model for proton exchange membrane fuel cells", AIChE J., 44,2410-2422 (1998). [7] Um, S., Wang, C.Y., Chen, K.S., "Computational fluid dynamics modeling of proton exchange membrane fuel ceils",J. Electrochem. Soc., 147, 4485-4493 (2000). [8] West, A.C., "Influence of rib spacing in proton-exchange membrane electrode assemblies", J. Appl. Electrochem.,26, 557-565 (1996). [9] Dutta, S., Shimpalee, S., Zee, J.W.V., "Three-dimensional numerical simulation of straight channel PEM fuel ceils",J. Appl. Electrochem., 30, 135-146 (2000). [10] Wood, D.L., Yi, J.S., Nguyen, T.V., "Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells", Electrochim Acta, 43, 3795-3809 (1998). [11] Baschuk, J.J., Li, X., "Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding", J. Power Source, 86, 181-196 (2000). [12] Wang, C.Y., Wang, Z.H., Pan, Y., "Two-phase transport in proton exchange membrane fuel cells", In: Proceedings of the ASME, Heat Transfer Division, Nashville, TN, USA,Volume 1, 351-357 (1999). [13] Nguyen, T.V., "A gas distributor design for protonexchange-membrane fuel cells", J. Electrochem. Soc., 143,L103-L105 (1996). [14] Kazim, A., Liu, H.T., Forges, P., "Modelling of performance of PEM fuel cells with conventional and interdigitated flow fields", J. Appl. Electrochem., 29, 1409-1416 (1999). [15] Wang, C.Y., Cheng, P., "A multiphase mixture model of multiphase, multicomponent transport in capillary porous media-I. Model development", Int. J. Heat Mass Transfer,39, 3607-3618 (1996). [16] Wang, C.Y., Gu, W.B., "Micro-macroscopic coupled modeling of batteries and fuel cells -I. Model development", J.Electrochem. Soc., 145, 3407-3417 (1998). [17] Weisbrod, K.R., Grot, S.A., Vanderborgh, N.E., "Throughthe-electrode model of a proton exchange membrane fuel cell", In: Electrochemical Society Proceedings, Pennington,USA, Volume 95-23,152-159 (1995). [18] Marr, C., Li, X., "Composition and performance modeling of catalyst layer in a proton exchange membrane fuel cell",J. Power Source, 77, 17-27 (1999). [19] You, L., Liu, H., "A parametric study of the cathode catalyst layer of PEM fuel cells using a pseudo-homogeneous model", Int. J. Hydrogen Energy, 26, 991-999 (2001). [20] Ge, S., Yi, B., Xu, H., "Model of water transport for protonexchange membrane fuel cell (PEMFC)", J. Chem. Ind.Eng. (China), 50, 39-47 (1999).(in Chinese) [21] Patankar, S.V., Numerical Heat Transfer and Fluid Flow,Hemisphere, 146 (1980). [22] Ticianelli, E.A., Derouin, C.R., Srinivasan, S., "Localization of platimun in low catalyst loading electrodes to attain high power densities in SPE fuel cells", J. Electroanal.Chem., 251, 275-295 (1988). [23] Rowe, A., Li, X., "Mathematical modeling of proton exchange membrane fuel cells", J. Power Source, 102, 82-96(2001). [24] Cussler, E.L., Diffusion, Mass Transfer in Fluid Systems,Cambridge University Press, Cambridge, 170 (1984). |