Dynamic soft sensor method based on joint mutual information

doi:10.3969/j.issn.0438-1157.2014.11.040

CIESC Journal ›› 2014, Vol. 65 ›› Issue (11): 4497-4502.DOI: 10.3969/j.issn.0438-1157.2014.11.040

Previous Articles Next Articles

Dynamic soft sensor method based on joint mutual information

RUAN Hongmei, TIAN Xuemin, WANG Ping

College of Information and Control Engineering, China University of Petroleum, Qingdao 266580, Shandong, China

Received:2014-07-18 Revised:2014-07-24 Online:2014-11-05 Published:2014-11-05
Supported by:
supported by the National Natural Science Foundation of China(61273160), the Fundamental Research Funds for the Central Universities (13CX05021A, 14CX06067A) and the China Postdoctoral Science Foundation (2013M541964).

基于联合互信息的动态软测量方法

阮宏镁, 田学民, 王平

中国石油大学(华东)信息与控制工程学院, 山东青岛 266580

通讯作者: 田学民
基金资助:
国家自然科学基金项目(61273160);中央高校基本科研业务费专项基金项目(13CX06067A);中国博士后科学基金项目(2013M541964).

Abstract

Abstract: In order to deal with time delay characteristic as well as dynamic characteristic widely exist in industrial process systems, this paper puts forward a dynamic soft sensor method based on joint mutual information. In the proposed method, maximizing the joint mutual information is taken as the criterion for selecting the continuous sub-variable set from each auxiliary variable's historical input data matrix. The selected sub-variable set forms a new data set containing the process's time delay information and dynamic information, which can be used to determine the time delay and historical data length of each auxiliary variable. The determination of the parameters of each auxiliary variable involves only the process's historical data and thus is independent of the following establishment of soft sensor model. As a result, the algorithm for constructing dynamic soft sensor models can be freely chosen according to the nonlinear degree of the specific application. The proposed soft sensor is applied to real-life debutanizer column process and its effectiveness is verified by the simulation results.

Key words: soft sensor, mutual information, time delay estimation, dynamic modeling

摘要： 针对工业过程中普遍存在的时延特性和动态特性,提出一种基于联合互信息的动态软测量方法.以联合互信息最大化作为准则,从各辅助变量的历史输入数据矩阵中选取一个连续子变量集,组成包含过程时延信息和动态信息的新数据集,进而确定各辅助变量的时延参数、历史数据长度.各辅助变量参数完全基于过程历史数据确定,与后续软测量模型的建立无关,因此建立动态软测量模型的形式可根据对象非线性程度自主选择.针对实际脱丁烷塔塔底丁烷浓度软测量的仿真研究验证了方法的有效性.

关键词: 软测量, 互信息, 时延估计, 动态建模

CLC Number:

TP277

RUAN Hongmei, TIAN Xuemin, WANG Ping. Dynamic soft sensor method based on joint mutual information[J]. CIESC Journal, 2014, 65(11): 4497-4502.

阮宏镁, 田学民, 王平. 基于联合互信息的动态软测量方法[J]. 化工学报, 2014, 65(11): 4497-4502.

References 19

[1]	Fortuna L, Graziani S, Rizzo A, Xibilia M G. Soft Sensors for Monitoring and Control of Industrial Processes[M]. Berlin: Springer- Verlag, 2007: 1-10
[2]	Haimi H, Mulas M, Corona F, Vahala R. Data-derived soft-sensors for biological wastewater treatment plants: an overview [J]. Environmental Modelling and Software, 2013, 47: 88-107
[3]	Rani A, Singh V, Gupta J R P. Development of soft sensor for neural network based control of distillation column [J]. ISA Transactions, 2013, 52(3): 438-449
[4]	Fu Y F. A dynamic soft-sensor modeling method based on FC-GP for 4-CBA content//IEEE Instrumentation and Measurement Technology Conference[C]. 2011: 1-4
[5]	Galicia H J, He Q P, Wang J. Comparison of the performance of a reduced-order dynamic PLS soft sensor with different updating schemes for digester control [J]. Control Engineering Practice, 2012, 20(8): 747-760
[6]	Shang C, Gao X Q, Yang F, Huang D X. Novel Bayesian framework for dynamic soft sensor based on support vector machine with finite impulse response [J]. IEEE Transaction on Control Systems Technology, 2013, 22(4): 1-8
[7]	Fortuna L, Graziani S, Xibilia M G. Soft sensors for product quality monitoring in debutanizer distillation columns [J]. Control Engineering Practice, 2005, 13(4): 499-508
[8]	Komulainen T, Sourander M, Jämsä-Jounela S L. An online application of dynamic PLS to a dearomatization process [J]. Computers and Chemical Engineering, 2004, 28(12): 2611-2619
[9]	Zhang J, Jin Q B, Xu Y M. Inferential estimation of polymer melt index using sequentially trained bootstrap aggregated neural networks [J]. Chemical Engineering and Technology, 2006, 29(4): 442-448
[10]	Jr O L, Nunes U, Araújo R, Schnitman L. Applications of information theory, genetic algorithms, and neural models to predict oil flow [J]. Communications in Nonlinear Science and Numerical Simulation, 2009, 14(7): 2870-2885
[11]	Souza F, Araújo R. Variable and time-lag selection using empirical data// IEEE 16th Conference on Emerging Technologies and Factory Automation[C]. 2011: 1-8
[12]	Souza F, Santos P, Araújo R. Variable and delay selection using neural networks and mutual information for data-driven soft sensors //IEEE Conference on Emerging Technologies and Factory Automation[C]. 2010: 1-8
[13]	Lou H C, Su H Y, Xie L, Gu Y, Rong G. Inferential model for industrial polypropylene melt index prediction with embedded priori knowledge and delay estimation [J]. Industrial and Engineering Chemistry Research, 2012, 51(25): 8510-8525
[14]	Kraskov A, Stögbauer H, Grassberger P. Estimating mutual information [J]. Physical Review E, 2004, 69(6): 066138
[15]	Doquire G, Verleysen M. A Performance Evaluation of Mutual Information Estimators for Multivariate Feature Selection[M]. Berlin: Springer-Verlag, 2013: 51-63
[16]	Wang Junyan(王钧炎), Huang Dexian(黄德先). Time delay estimation of soft sensor model based on hybrid differential evolution algorithm [J]. Journal of Chemical Industry and Engineering(China) (化工学报), 2008, 59(8): 2058-2064
[17]	Qian Xiaoshan(钱晓山), Yang Chunhua(阳春华), Xu Lisha(徐丽莎). Soft sensor of sodium aluminate solution concentration based on improved differential evolution algorithm and LSSVM [J]. CIESC Journal (化工学报), 2013, 64(5): 1704-1709
[18]	Qin S J. Survey on data-driven industrial process monitoring and diagnosis [J]. Annual Reviews in Control, 2012, 36(2): 220-234
[19]	Wang Qiang(王强), Tian Xuemin(田学民). Soft sensing based on KPCA and LSSVM [J]. CIESC Journal (化工学报), 2011, 62(10): 2813-2817

Dynamic soft sensor method based on joint mutual information

基于联合互信息的动态软测量方法

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References 19

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Linqi YAN, Zhenlei WANG. Multi-step predictive soft sensor modeling based on STA-BiLSTM-LightGBM combined model [J]. CIESC Journal, 2023, 74(8): 3407-3418.
[2]	Weiming SHAO, Wenxue HAN, Wei SONG, Yong YANG, Can CHEN, Dongya ZHAO. Dynamic soft sensor modeling method based on distributed Bayesian hidden Markov regression [J]. CIESC Journal, 2023, 74(6): 2495-2502.
[3]	Kun WANG, Hongbo SHI, Shuai TAN, Bing SONG, Yang TAO. Local time difference constrained neighborhood preserving embedding algorithm for fault detection [J]. CIESC Journal, 2022, 73(7): 3109-3119.
[4]	Le ZHOU, Chengkai SHEN, Chao WU, Beiping HOU, Zhihuan SONG. Deep fusion feature extraction network and its application in chemical process soft sensing [J]. CIESC Journal, 2022, 73(7): 3156-3165.
[5]	Huan GAO, Guoliang DING, Faxian ZHOU, Dawei ZHUANG. Research on dynamic separation characteristics of R410A refrigerant with lubricant [J]. CIESC Journal, 2022, 73(3): 1054-1062.
[6]	SHI Shanshan, WEI Aibo, ZHANG Xiaobin. CFD simulation and experimental research on ultrasonic cavitation of liquid nitrogen [J]. CIESC Journal, 2021, 72(4): 1930-1938.
[7]	LIU Cong, XIE Li, YANG Huizhong. Multi-model soft sensor development for penicillin fermentation process based on improved density peak clustering [J]. CIESC Journal, 2021, 72(3): 1606-1615.
[8]	Xiaohui WANG, Yanjiang WANG, Xiaogang DENG, Zheng ZHANG. Industrial process fault detection using weighted deep support vector data description [J]. CIESC Journal, 2021, 72(11): 5707-5716.
[9]	Fanxin MENG, Jianing SUN, Yue ZHOU, Zanjun GAO, Dingbin CHENG. Modeling and validating of air cycle machine in aircraft environmental control system [J]. CIESC Journal, 2020, 71(S1): 328-334.
[10]	Linzi YIN, Yuyin GUAN, Zhaohui JIANG, Xuemei XU. Optimal method of selecting silicon content data in blast furnace hot metal based on k-means++ [J]. CIESC Journal, 2020, 71(8): 3661-3670.
[11]	Hongbiao ZHOU, Yu ZHANG, Xiaoying BAI, Baolian LIU, Huanyu ZHAO. Model predictive control of nonlinear system based on adaptive fuzzy neural network [J]. CIESC Journal, 2020, 71(7): 3201-3212.
[12]	Xuejin GAO, Tengfei LIU, Zidong XU, Huihui GAO, Yongchuan YU. Intermittent process fault monitoring based on recurrent autoencoder [J]. CIESC Journal, 2020, 71(7): 3172-3179.
[13]	Yuhao DU, Gaowei YAN, Rong LI, Fang WANG. Multiple working conditions soft sensor modeling method of geodesic flow kernel based on locally linear embedding [J]. CIESC Journal, 2020, 71(3): 1278-1287.
[14]	Yingze LI, Lu YANG, Qi WANG, Siyu YANG. Modeling and simulation of gasification process in BGL furnace [J]. CIESC Journal, 2020, 71(3): 1174-1188.
[15]	YANG Yijun,WANG Zhenlei,WANG Xin. Soft sensor modeling method based on hybrid model of nearest neighbor and neural network [J]. CIESC Journal, 2020, 71(12): 5696-5705.