CIESC Journal ›› 2015, Vol. 66 ›› Issue (3): 1126-1132.DOI: 10.11949/j.issn.0438-1157.20141219

Previous Articles     Next Articles

Activated coke pore structure evolution and its influence on desulfuration

LI Yang1,2, ZHU Yuwen2,3, GAO Jihui2, SUN Fei2, LEI Ming1   

  1. 1 Xi'an Thermal Power Research Institute Co., Ltd., Xi'an 710032, Shaanxi, China;
    2 School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, Heilongjiang, China;
    3 School of Energy and Safety Engineering, Tianjin Cheng Jian University, Tianjin 300384, China
  • Received:2014-08-12 Revised:2014-11-14 Online:2015-03-05 Published:2015-03-05
  • Supported by:

    supported by the National Natural Science Foundation of China(51134015).

活性焦孔结构演变规律及对脱硫性能的影响

李阳1,2, 朱玉雯2,3, 高继慧2, 孙飞2, 雷鸣1   

  1. 1 西安热工研究院有限公司, 陕西 西安 710032;
    2 哈尔滨工业大学能源科学与工程学院, 黑龙江 哈尔滨 150001;
    3 天津城建大学能源与安全工程学院, 天津300384
  • 通讯作者: 李阳
  • 基金资助:

    国家自然科学基金-煤炭联合基金项目(51134015)。

Abstract:

Steam activation was used to prepare activated coke (AC). The pore structure generation process was controlled through the control of temperature and burning loss rate, and thus a special pore structure activated coke was prepared. The pore structure of the samples was characterized by N2 adsorption, and SO2 adsorption properties of different ACs were studied on the fixed bed system. In the preparation of AC, low temperature activation contributed to formation of micropore structure and improved desulfurization performance. Micropores were the main sites of active coke desulfurization reaction. Mesopores and macro-porous were the diffusion channels for molecules and store H2SO4. Microporous surface area could be used as a key indicator to evaluate desulfurization performance of active coke.

Key words: activated coke, activation, pore structure, adsorption properties

摘要:

采用气体活化法制备活性焦,通过控制温度和烧失率来控制孔结构生成过程,制取具有特定孔结构的活性焦。采用N2吸附法对样品的孔结构进行表征,并在固定床实验系统上对不同样品的脱硫性能进行测试研究。研究发现:活性焦制备过程中,低温活化有利于活性焦微孔结构的形成和脱硫性能的提高,微孔是活性焦脱硫反应发生的主要场所,中孔和大孔作为分子扩散通道并具有存储H2SO4的作用,微孔比表面积可以作为判断活性焦脱硫性能的关键指标。

关键词: 活性焦, 活化, 孔结构, 吸附性能

CLC Number: