Research progress of high temperature proton exchange membranes

doi:10.11949/0438-1157.20201073

Abstract

Abstract:

High temperature proton exchange membrane fuel cells (HT-PEMFCs) have become one of the most important research directions in the energy field because of their good catalyst CO tolerance, high energy conversion rate, and simple hydrothermal management. High temperature proton exchange membranes (HTPEMs) are the most critical component. In this paper, we reviewed current research progress of HTPEM based on proton carriers at high temperature, including water, phosphoric acid and imidazole molecules. It appears that HTPEMs based on phosphoric acid doping perform the best. There are also a few issues that need to be addressed. Future directions concerning the development of HTPEMs were also outlined.

Key words: fuel cell, membrane, high temperature, proton exchange membrane, conductivity

摘要：

高温质子交换膜燃料电池（HT-PEMFCs）因其具有催化剂CO耐受性良好，能量转化率高，水热管理简单等优点，成为了能源领域重要的研究方向之一。高温质子交换膜（HTPEM）是它的主要部件之一，分别以水、磷酸分子和咪唑分子为质子传导载体分析了目前HTPEM的研究现状，比较后得出了以磷酸为质子载体的HTPEM性能最佳的结论，指出了研究中尚存的问题，并展望了未来HTPEM可能的研究方向。

关键词: 燃料电池, 膜, 高温, 质子交换膜, 电导率

CLC Number:

TQ 51

LI Hui, YANG Zhengjin, XU Tongwen. Research progress of high temperature proton exchange membranes[J]. CIESC Journal, 2021, 72(1): 132-142.

李慧, 杨正金, 徐铜文. 高温质子交换膜研究进展[J]. 化工学报, 2021, 72(1): 132-142.

Figures/Tables 3

References 74

1	Rosli R E, Sulong A B, Daud W R W, et al. A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system[J]. International Journal of Hydrogen Energy, 2017, 42(14): 9293-9314.
2	Araya S S, Zhou F, Liso V, et al. A comprehensive review of PBI-based high temperature PEM fuel cells[J]. International Journal of Hydrogen Energy, 2016, 41(46): 21310-21344.
3	Shigematsu A, Yamada T, Kitagawa H. Wide control of proton conductivity in porous coordination polymers[J]. Journal of the American Chemical Society, 2011, 133(7): 2034-2036.
4	Bose S, Kuila T, Nguyen T X H, et al. Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenges[J]. Progress in Polymer Science, 2011, 36(6): 813-843.
5	Hori Y, Chikai T, Ida T, et al. Local structure and hydrogen bond characteristics of imidazole molecules for proton conduction in acid and base proton-conducting composite materials[J]. Physical Chemistry Chemical Physics, 2018, 20(15): 10311-10318.
6	Zhang J, Xie Z, Zhang J, et al. High temperature PEM fuel cells[J]. Journal of Power Sources, 2006, 160(2): 872-891.
7	Liu X, Li Y, Xue J, et al. Magnetic field alignment of stable proton-conducting channels in an electrolyte membrane[J]. Nature Communications, 2019, 10(1): 842-854.
8	Munavalli B B, Kariduraganavar M Y. Development of novel sulfonic acid functionalized zeolites incorporated composite proton exchange membranes for fuel cell application[J]. Electrochimica Acta, 2019, 296: 294-307.
9	Lee K H, Chu J Y, Kim A R, et al. Enhanced performance of a sulfonated poly(arylene ether ketone) block copolymer bearing pendant sulfonic acid groups for polymer electrolyte membrane fuel cells operating at 80% relative humidity[J]. ACS Applied Materials & Interfaces, 2018, 10(24): 20835-20844.
10	Wang J, Li P, Zhang Y, et al. Porous Nafion nanofiber composite membrane with vertical pathways for efficient through-plane proton conduction[J]. Journal of Membrane Science, 2019, 585: 157-165.
11	Yan E, Wang J, Jiang Z, et al. Enhanced water retention and stable dynamic water behavior of sulfonated poly(ether ether ketone) membranes under low humidity by incorporating humidity responsive double-shelled hollow spheres[J]. Journal of Materials Chemistry A, 2013, 1(38): 11762-11777.
12	Yin C, Li J, Zhou Y, et al. Enhancement in proton conductivity and thermal stability in Nafion membranes induced by incorporation of sulfonated carbon nanotubes[J]. ACS Applied Materials & Interfaces, 2018, 10(16): 14026-14035.
13	Joseph D, Büsselmann J, Harms C, et al. Porous Nafion membranes[J]. Journal of Membrane Science, 2016, 520: 723-730.
14	Shi S, Weber A Z, Kusoglu A. Structure/property relationship of Nafion XL composite membranes[J]. Journal of Membrane Science, 2016, 516: 123-134.
15	Xu G, Li J, Ma L, et al. Performance dependence of swelling-filling treated Nafion membrane on nano-structure of macromolecular filler[J]. Journal of Membrane Science, 2017, 534: 68-72.
16	Siracusano S, Baglio V, Nicotera I, et al. Sulfated titania as additive in Nafion membranes for water electrolysis applications[J]. International Journal of Hydrogen Energy, 2017, 42(46): 27851-27858.
17	Chang C H, Yang R J. Enhanced sample preconcentration in microfluidic chip using graphene oxide-Nafion membrane[J]. Microfluidics and Nanofluidics, 2016, 20(12): 168-176.
18	Koók L, Nemestóthy N, Bakonyi P, et al. Performance evaluation of microbial electrochemical systems operated with Nafion and supported ionic liquid membranes[J]. Chemosphere, 2017, 175: 350-355.
19	Maiti J, Kakati N, Woo S P, et al. Nafion^® based hybrid composite membrane containing GO and dihydrogen phosphate functionalized ionic liquid for high temperature polymer electrolyte membrane fuel cell[J]. Composites Science and Technology, 2018, 155: 189-196.
20	Xu G, Wei Z, Li S, et al. In-situ sulfonation of targeted silica-filled Nafion for high-temperature PEM fuel cell application[J]. International Journal of Hydrogen Energy, 2019, 44(56): 29711-29716.
21	Litt M, Wycisk R. Poly(arylenesulfonic acids) with frozen-in free volume as hydrogen fuel cell membrane materials[J]. Polymer Reviews, 2015, 55(2): 307-329.
22	Si K, Dong D, Wycisk R, et al. Synthesis and characterization of poly(para-phenylene disulfonic acid), its copolymers and their n-alkylbenzene grafts as proton exchange membranes: high conductivity at low relative humidity[J]. Journal of Materials Chemistry, 2012, 22(39): 20907-20917.
23	Sanders D F, Smith Z P, Guo R, et al. Energy-efficient polymeric gas separation membranes for a sustainable future: a review[J]. Polymer, 2013, 54(18): 4729-4761.
24	Miyatake K, Chikashige Y, Higuchi E, et al. Tuned polymer electrolyte membranes based on aromatic polyethers for fuel cell applications[J]. Journal of the American Chemical Society, 2007, 129(13): 3879-3887.
25	Lee H F, Huang Y C, Wang P H, et al. Synthesis of highly sulfonated polyarylene ethers containing alternating aromatic units[J]. Materials Today Communications, 2015, 3: 114-121.
26	Moh L C H, Goods J B, Kim Y, et al. Free volume enhanced proton exchange membranes from sulfonated triptycene poly(ether ketone)[J]. Journal of Membrane Science, 2018, 549: 236-243.
27	Pandey R P, Thakur A K, Shahi V K. Sulfonated polyimide/acid-functionalized graphene oxide composite polymer electrolyte membranes with improved proton conductivity and water-retention properties[J]. ACS Applied Materials & Interfaces, 2014, 6(19): 16993-17002.
28	Ye Y, Wu X, Yao Z, et al. Metal–organic frameworks with a large breathing effect to host hydroxyl compounds for high anhydrous proton conductivity over a wide temperature range from subzero to 125℃[J]. Journal of Materials Chemistry A, 2016, 4(11): 4062-4070.
29	葛亮, 伍斌, 王鑫, 等. MOFs分离膜在水系分离中的应用[J]. 化工学报, 2019, 70(10): 3748-3763.
	Ge L, Wu B, Wang X, et al. Application in water system separation of MOFs separation membranes[J]. CIESC Journal, 2019, 70(10): 3748-3763.
30	Yang F, Xu G, Dou Y, et al. A flexible metal–organic framework with a high density of sulfonic acid sites for proton conduction[J]. Nature Energy, 2017, 2(11): 877-883.
31	Zhang B, Cao Y, Jiang S, et al. Enhanced proton conductivity of Nafion nanohybrid membrane incorporated with phosphonic acid functionalized graphene oxide at elevated temperature and low humidity[J]. Journal of Membrane Science, 2016, 518: 243-253.
32	Hong L, Wang B, Zhao C. Phosphoric acid doped high temperature proton exchange membranes based on comb-shaped polymers with quaternized graft architectures[J]. Applied Surface Science, 2019, 483: 785-792.
33	Li Q, He R, Jensen J O, et al. Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100℃[J]. Chemistry of Materials, 2003, 15(26): 4896-4915.
34	Qin Q, Tang Q, Li Q, et al. Incorporation of H₃PO₄ into three-dimensional polyacrylamide-graft-starch hydrogel frameworks for robust high-temperature proton exchange membrane fuel cells[J]. International Journal of Hydrogen Energy, 2014, 39(9): 4447-4458.
35	Satheesh K B, Sana B, Mathew D, et al. Polybenzimidazole-nanocomposite membranes: enhanced proton conductivity with low content of amine-functionalized nanoparticles[J]. Polymer, 2018, 145: 434-446.
36	Asensio J A, Sanchez E M, Gomez R P. Proton-conducting membranes based on benzimidazole polymers for high-temperature PEM fuel cells. A chemical quest[J]. Chemical Society Reviews, 2010, 39(8): 3210-3239.
37	Yang J, Xu Y, Zhou L, et al. Hydroxyl pyridine containing polybenzimidazole membranes for proton exchange membrane fuel cells[J]. Journal of Membrane Science, 2013, 446: 318-325.
38	Wang J, Jiang H, Xu Y, et al. Quaternized poly(aromatic ether sulfone) with siloxane crosslinking networks as high temperature proton exchange membranes[J]. Applied Surface Science, 2018, 452: 473-480.
39	Zhang J, Zhang J, Bai H, et al. A new high temperature polymer electrolyte membrane based on tri-functional group grafted polysulfone for fuel cell application[J]. Journal of Membrane Science, 2019, 572: 496-503.
40	Bai H, Peng H, Xiang Y, et al. Poly(arylene piperidine)s with phosphoric acid doping as high temperature polymer electrolyte membrane for durable, high-performance fuel cells[J]. Journal of Power Sources, 2019, 443: 227219-227227.
41	Tao P, Dai Y, Chen S, et al. Hyperbranched polyamidoamine modified high temperature proton exchange membranes based on PTFE reinforced blended polymers[J]. Journal of Membrane Science, 2020, 604: 118004-118013.
42	Wang L, Ni J, Liu D, et al. Effects of branching structures on the properties of phosphoric acid-doped polybenzimidazole as a membrane material for high-temperature proton exchange membrane fuel cells[J]. International Journal of Hydrogen Energy, 2018, 43(34): 16694-16703.
43	Wang L, Wu Y, Fang M, et al. Synthesis and preparation of branched block polybenzimidazole membranes with high proton conductivity and single-cell performance for use in high temperature proton exchange membrane fuel cells[J]. Journal of Membrane Science, 2020, 602: 117981-117988.
44	Papadimitriou K D, Paloukis F, Neophytides S G, et al. Cross-linking of side chain unsaturated aromatic polyethers for high temperature polymer electrolyte membrane fuel cell applications[J]. Macromolecules, 2011, 44(12): 4942-4951.
45	Wang S, Zhao C, Ma W, et al. Silane-cross-linked polybenzimidazole with improved conductivity for high temperature proton exchange membrane fuel cells[J]. Journal of Materials Chemistry A, 2013, 1(3): 621-629.
46	Chen H, Han S Y, Liu R H, et al. High conductive, long-term durable, anhydrous proton conductive solid-state electrolyte based on a metal-organic framework impregnated with binary ionic liquids: synthesis, characteristic and effect of anion[J]. Journal of Power Sources, 2018, 376: 168-176.
47	Oshiba Y, Tomatsu J, Yamaguchi T. Thin pore-filling membrane with highly packed-acid structure for high temperature and low humidity operating polymer electrolyte fuel cells[J]. Journal of Power Sources, 2018, 394: 67-73.
48	Mukhopadhyay S, Das A, Jana T, et al. Fabricating a MOF material with polybenzimidazole into an efficient proton exchange membrane[J]. ACS Applied Energy Materials, 2020, 3(8): 7964-7977.
49	Anahidzade N, Abdolmaleki A, Dinari M, et al. Metal-organic framework anchored sulfonated poly(ether sulfone) as a high temperature proton exchange membrane for fuel cells[J]. Journal of Membrane Science, 2018, 565: 281-292.
50	Ranjeesh K C, Illathvalappil R, Veer S D, et al. Imidazole-linked crystalline two-dimensional polymer with ultrahigh proton-conductivity[J]. Journal of the American Chemical Society, 2019, 141(38): 14950-14954.
51	Tang Q, Yuan S, Cai H. High-temperature proton exchange membranes from microporous polyacrylamide caged phosphoric acid[J]. Journal of Materials Chemistry A, 2013, 1(3): 630-636.
52	Zhang X, Fu X, Yang S, et al. Design of sepiolite-supported ionogel-embedded composite membranes without proton carrier wastage for wide-temperature-range operation of proton exchange membrane fuel cells[J]. Journal of Materials Chemistry A, 2019, 7(25): 15288-15301.
53	Yang J, Liu C, Gao L, et al. Phosphoric acid doped imidazolium silane crosslinked poly(epichlorihydrin)/PTFE as high temperature proton exchange membranes[J]. RSC Advances, 2016, 6(66): 61029-61036.
54	Yang J, Gao L, Wang J, et al. Strengthening phosphoric acid doped polybenzimidazole membranes with siloxane networks for using as high temperature proton exchange membranes[J]. Macromolecular Chemistry and Physics, 2017, 218(10): 1700009-1700018.
55	Han L, Luo X, Luan X, et al. An inorganic mesoporous membrane in situ-doped with Cs_2.5H_0.5PW₁₂O₄₀ for high temperature proton exchange membrane fuel cells[J]. International Journal of Hydrogen Energy, 2016, 41(35): 15783-15789.
56	Rao S S, Hande V R, Sawant S M, et al. a-ZrP nanoreinforcement overcomes the trade-off between phosphoric acid dopability and thermomechanical properties: nanocomposite HTPEM with stable fuel cell performance[J]. ACS Applied Materials & Interfaces, 2019, 11(40): 37013-37025.
57	Li X, Ma H, Wang P, et al. Construction of high-performance, high-temperature proton exchange membranes through incorporating SiO₂ nanoparticles into novel cross-linked polybenzimidazole networks[J]. ACS Applied Materials & Interfaces, 2019, 11(34): 30735-30746.
58	Jung H Y, Kim S Y, Kim O, et al. Effect of the protogenic group on the phase behavior and ion transport properties of acid-bearing block copolymers[J]. Macromolecules, 2015, 48(17): 6142-6152.
59	Dimitrov I, Takamuku S, Jankova K, et al. Polysulfone functionalized with phosphonated poly(pentafluorostyrene) grafts for potential fuel cell applications[J]. Macromolecular Rapid Communications, 2012, 33(16): 1368-1374.
60	Ebrahim A L, Ghassemi H, Shahram M A, et al. Phosphonated polyimides: enhancement of proton conductivity at high temperatures and low humidity[J]. Journal of Membrane Science, 2016, 516: 74-82.
61	Tang H, Geng K, Hu Y, et al. Synthesis and properties of phosphonated polysulfones for durable high-temperature proton exchange membranes fuel cell[J]. Journal of Membrane Science, 2020, 605: 118107-118115.
62	Yang J, Aili D, Li Q, et al. Covalently cross-linked sulfone polybenzimidazole membranes with poly(vinylbenzyl chloride) for fuel cell applications[J]. ChemSusChem, 2013, 6(2): 275-282.
63	Satheesh K B, Sana B, Unnikrishnan G, et al. Polybenzimidazole co-polymers: their synthesis, morphology and high temperature fuel cell membrane properties[J]. Polymer Chemistry, 2020, 11(5): 1043-1054.
64	Mangiatordi G F, Laage D, Adamo C. Backbone effects on the charge transport in poly-imidazole membranes: a theoretical study[J]. Journal of Materials Chemistry A, 2013, 1(26): 7751-7759.
65	Kreuer K D, Paddison S J, Spohr E, et al. Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology[J]. Chemical Reviews, 2004, 104(10): 4637-4678.
66	Martwiset S, Chaisaward K, Treepet S, et al. Proton conducting membranes based on poly(acrylonitrile-co-styrene sulfonic acid) and imidazole[J]. International Journal of Hydrogen Energy, 2017, 42(10): 6918-6925.
67	Lee S, Ann J, Lee H, et al. Synthesis and characterization of crosslink-free highly sulfonated multi-block poly(arylene ether sulfone) multi-block membranes for fuel cells[J]. Journal of Materials Chemistry A, 2015, 3(5): 1833-1836.
68	Zhang Y, Zhang X, Li P, et al. Porous nanofiber composite membrane with 3D interpenetrating networks towards ultrafast and isotropic proton conduction[J]. Journal of Materials Chemistry A, 2020, 8(10): 5128-5137.
69	Wang L, Deng N, Wang G, et al. Constructing amino-functionalized flower-like metal-organic framework nanofibers in sulfonated poly(ether sulfone) proton exchange membrane for simultaneously enhancing interface compatibility and proton conduction[J]. ACS Applied Materials & Interfaces, 2019, 11(43): 39979-39990.
70	Li X, Ma H, Wang P, et al. Highly conductive and mechanically stable imidazole-rich cross-linked networks for high-temperature proton exchange membrane fuel cells[J]. Chemistry of Materials, 2020, 32(3): 1182-1191.
71	Yamada M, Honma I. Anhydrous proton conducting polymer electrolytes based on poly(vinylphosphonic acid)-heterocycle composite material[J]. Polymer, 2005, 46(9): 2986-2992.
72	Liu X, Zhang J, Zheng C, et al. Oriented proton-conductive nano-sponge-facilitated polymer electrolyte membranes[J]. Energy & Environmental Science, 2020, 13(1): 297-309.
73	Bai H, Wang H, Zhang J, et al. High temperature polymer electrolyte membrane achieved by grafting poly(1-vinylimidazole) on polysulfone for fuel cells application[J]. Journal of Membrane Science, 2019, 592: 117395-117402.
74	Guo Z, Xu X, Xiang Y, et al. New anhydrous proton exchange membranes for high-temperature fuel cells based on PVDF–PVP blended polymers[J]. Journal of Materials Chemistry A, 2015, 3(1): 148-155.

[1]	Yanpeng WU, Xiaoyu LI, Qiaoyang ZHONG. Experimental analysis on filtration performance of electrospun nanofibers with amphiphobic membrane of oily fine particles [J]. CIESC Journal, 2023, 74(S1): 259-264.
[2]	Yitong LI, Hang GUO, Hao CHEN, Fang YE. Study on operating conditions of proton exchange membrane fuel cells with non-uniform catalyst distributions [J]. CIESC Journal, 2023, 74(9): 3831-3840.
[3]	Jiayi ZHANG, Jiali HE, Jiangpeng XIE, Jian WANG, Yu ZHAO, Dongqiang ZHANG. Research progress of pervaporation technology for N-methylpyrrolidone recovery in lithium battery production [J]. CIESC Journal, 2023, 74(8): 3203-3215.
[4]	Yali HU, Junyong HU, Suxia MA, Yukun SUN, Xueyi TAN, Jiaxin HUANG, Fengyuan YANG. Development of novel working fluid and study on electrochemical characteristics of reverse electrodialysis heat engine [J]. CIESC Journal, 2023, 74(8): 3513-3521.
[5]	Kuikui HAN, Xianglong TAN, Jinzhi LI, Ting YANG, Chun ZHANG, Yongfen ZHANG, Hongquan LIU, Zhongwei YU, Xuehong GU. Four-channel hollow fiber MFI zeolite membrane for the separation of xylene isomers [J]. CIESC Journal, 2023, 74(6): 2468-2476.
[6]	Zhaoguang CHEN, Yuxiang JIA, Meng WANG. Modeling neutralization dialysis desalination driven by low concentration waste acid and its validation [J]. CIESC Journal, 2023, 74(6): 2486-2494.
[7]	Hao GU, Fujian ZHANG, Zhen LIU, Wenxuan ZHOU, Peng ZHANG, Zhongqiang ZHANG. Desalination performance and mechanism of porous graphene membrane in temporal dimension under mechanical-electrical coupling [J]. CIESC Journal, 2023, 74(5): 2067-2074.
[8]	Yongyao SUN, Qiuying GAO, Wenguang ZENG, Jiaming WANG, Yifei CHEN, Yongzhe ZHOU, Gaohong HE, Xuehua RUAN. Design and optimization of membrane-based integration process for advanced utilization of associated gases in N₂-EOR oilfields [J]. CIESC Journal, 2023, 74(5): 2034-2045.
[9]	Chenxin LI, Yanqiu PAN, Liu HE, Yabin NIU, Lu YU. Carbon membrane model based on carbon microcrystal structure and its gas separation simulation [J]. CIESC Journal, 2023, 74(5): 2057-2066.
[10]	Kunyang FAN, Jingxing YANG, Haibo XU, Xingrong LIAN, Fengmei HE, Conghui CHEN, Zengyao LI. A unified lattice Boltzmann model for heat transfer in opacifiers-doped silica aerogel [J]. CIESC Journal, 2023, 74(5): 1974-1981.
[11]	Lei WANG, Lei WANG, Yunlong BAI, Liuliu HE. Preparation of SA lithium ion sieve membrane and its adsorptive properties [J]. CIESC Journal, 2023, 74(5): 2046-2056.
[12]	Rong WANG, Yonghong WANG, Xinru ZHANG, Jinping LI. Construction of 6FDA-based polyimide carbon molecular sieve membranes for gas separation and its application [J]. CIESC Journal, 2023, 74(4): 1433-1445.
[13]	Yangguang LYU, Peipei ZUO, Zhengjin YANG, Tongwen XU. Triazine framework polymer membranes for methanol/n-hexane separation via organic solvent nanofiltration [J]. CIESC Journal, 2023, 74(4): 1598-1606.
[14]	Laiming LUO, Jin ZHANG, Zhibin GUO, Haining WANG, Shanfu LU, Yan XIANG. Simulation and experiment of high temperature polymer electrolyte membrane fuel cells stack in the 1—5 kW range [J]. CIESC Journal, 2023, 74(4): 1724-1734.
[15]	Xiaoxuan WANG, Xiaohong HU, Yunan LU, Shiyong WANG, Fengxian FAN. Numerical simulation of flow characteristics in a rotating membrane filter [J]. CIESC Journal, 2023, 74(4): 1489-1498.