1 Eckert, W.F., Masliyah, J.H., Afacan, A., “Fractionation of softwood TMP by flotation”, TAPPI J, 80, 210—216(1997). 2 Bliss, T.L., “A study of fiber fractionation using cen-trifugal cleaners”, M.S. Thesis, Miami Univ., Oxford, Ohio (1983). 3 Rewatkar, V.B., “Hardwood fiber fractionation using ro-tating cone”, Can. J. Chem. Eng., 75, 196—204(1997). 4 Eckert, W.F., Afacan, A., Masliyah, J.H., “Fractionation of softwood TMP by continuous flotation”, TAPPI J, 83, 1—8(2000). 5 Olson, J.A., “Fiber length fractionation caused by pulp screening, slotted screen plates”, J. Pulp Paper Sci., 27, 255—261(2001). 6 Smook, G.A., Handbook for Pulp & Paper Technologists, 2nd edition, Angus Wilde Publication, Vancouver (1999). 7 Slack, M.D., Prasad, R.O., Bakker, A., Boysan, F., “Ad-vances in cyclone modeling using unstructured grids”, Trans. Inst. Chem. Engrs, 78A, 1098—1104(2000). 8 Gavelin, G., Backman, J., “Fractionation with hydrocyc-lone”, In: Proceedings of TAPPI Pulping Conference, Atlanta, USA (1991). 9 Branion, R., Ho, S.L., Rehmat, T., Sevilla, E., “Fiber fractionation in hydrocyclone”, In: Proc eedings of 6th World Congr. Chem. Eng., Melbourne, Australia (2001). 10 Liu, S.J., Zhu, Z.X., Li, W., Afacan, A., Masligah, J.H., “Kraft wood-pulp fiber fractionation with air-sparged hydrocyclone”, In: Proceedings of PAPTAC Annual Meeting, Montreal, Canada, January (2002). 11 Ho, S.L., “Synthetic fiber fractionation in hydrocyc-lones”, Ph.D. Thesis, University of British Columbia, Canada (2001). 12 Liu, S.J., “Pulp fiber size characterization”, J. Tianjin Univ. Sci. Technol., 19, 234—241(2004).
|