基于多目标下的两级并联除湿热泵系统实验研究

doi:10.11949/0438-1157.20221521

摘要/Abstract

摘要：

提出了一种新型的两级并联除湿热泵系统，并在典型工况下对系统性能进行了实验研究。实验表明，该系统可以有效解决除湿热泵显热负荷处理能力不足的问题，能够灵活部署显热和潜热两端不同比例的热负荷：在典型工况下可提供19.0℃、8.81 g/kg的舒适区送风，在冷凝温度50℃下平均COP 达3.92。当冷凝温度从55℃变化到35℃时，COP从3.39上升到5.81，显热负荷比始终保持在16∶1以上。在不同环境下系统湿负荷占比可达到7%~60%，满足大部分送风状态的温湿度解耦。

关键词: 除湿换热器, 热泵, 高显热比, 冷凝温度

Abstract:

A novel two-stage parallel desiccant coated heat pump system is proposed, the system performance is experimentally studied under air typical conditions. The experiments show that the system can effectively solve the problem of insufficient handling capacity of the sensible heat load of the solid desiccant coated heat pump(SDHP), the sensible and latent heat load can be flexibly deployed in different ratio: it can provide 19.0℃ and 8.81 g/kg of air supply in the comfort zone under typical air conditions, the average COP reached 3.92 under the condensing temperature of 50℃. The COP risen from 3.39 to 5.81 when the condensing temperature changed from 55℃ to 35℃, the sensible heat load ratio is always maintained above 16∶1. The latent load ratio of the system in different environments can reach 7%—60%, which can meet the requirements of temperature and humidity decoupling in most air supply conditions.

Key words: desiccant coated heat exchanger, heat pump, high sensible heat load ratio, condensing temperature

中图分类号:

TB 657.2

邹启宏, 李乾, 葛天舒. 基于多目标下的两级并联除湿热泵系统实验研究[J]. 化工学报, 2023, 74(S1): 265-271.

Qihong ZOU, Qian LI, Tianshu GE. Experimental study of two-stage parallel desiccant coated heat pump system based on multi-objectives[J]. CIESC Journal, 2023, 74(S1): 265-271.

图/表 8

参考文献 31

1	江亿. 我国建筑耗能状况及有效的节能途径[J]. 暖通空调, 2005, 35(5): 30-40.
	Jiang Y. Current building energy consumption in China and effective energy efficiency measures[J]. Heating Ventilating ＆ Air Conditioning. 2005, 35(5): 30-40.
2	常世钧, 龚光彩. 冷热源及建筑节能的研究现状和进展[J]. 建筑热能通风空调, 2003, 22(5): 18-23.
	Chang S J, Gong G C. Research situation on cool and heat source as well as buliliding energy conservation[J]. Building Energy ＆ Environment, 2003, 22(5): 18-23.
3	涂耀东, 江宇, 葛天舒, 等. 新型固体吸附除湿空调能耗影响因素分析[J]. 化工学报, 2014, 65(S2): 222-227.
	Tu Y D, Jiang Y, Ge T S, et al. Analysis on impact factors of energy consumption of novel solid adsorptive dehumidification air-condition system[J]. CIESC Journal, 2014, 65(S2): 222-227.
4	陆繁莉, 葛天舒, 代彦军, 等. 新型半解耦式除湿热泵系统的降温除湿性能[J]. 化工学报, 2018, 69(S2): 55-60.
	Lu F L, Ge T S, Dai Y J, et al. Cooling and dehumidification performance of a novel semi-decoupled solid desiccant heat pump[J]. CIESC Journal, 2018, 69(S2): 55-60
5	江宇, 黄溢, 葛天舒, 等. 新型热湿独立控制空调系统的实验研究[J]. 化工学报, 2014, 65(S2): 188-194.
	Jiang Y, Huang Y, Ge T S, et al. Novel temperature and humidity independent control system[J]. CIESC Journal, 2014, 65(S2): 188-194.
6	Jia C X. Analysis on a hybrid desiccant air-conditioning system[J]. Applied Thermal Engineering, 2006, 26(17/18): 2393-2400.
7	Zhang L, Hihara E, Saikawa M. Combination of air-source heat pumps with liquid desiccant dehumidification of air[J]. Energy Conversion and Management, 2012, 57: 107-116
8	刘晓华, 易晓勤, 谢晓云, 等. 基于溶液除湿方式的温湿度独立控制空调系统性能分析[J]. 中国科技论文在线, 2008, 3(7): 469-476.
	Liu X H, Yi X Q, Xie X Y, et al. Performance analysis on liquid desiccant based temperature and humidity independent control air-conditioning system[J]. Sciencepaper Online, 2008, 3(7): 469-476.
9	Dai Y J. Use of liquid desiccant cooling to improve the performance of vapor compression air conditioning[J]. Applied Thermal Engineering, 2001, 21(12): 1185-1202.
10	Zhang L. Performance analysis of a no-frost hybrid air conditioning system with integrated liquid desiccant dehumidification[J]. International Journal of Refrigeration, 2010, 33(1): 116-124.
11	Niu X, Fu X, Ma Z. Investigation on capacity matching in liquid desiccant and heat pump hybrid air-conditioning systems[J]. International Journal of Refrigeration, 2012, 35(1): 160-170.
12	Sheng Y. Simulation and energy saving analysis of high temperature heat pump coupling to desiccant wheel air conditioning system[J]. Energy, 2015, 83: 583-596.
13	Fatouh M, Ibrahim T A, Mostafa A. Experimental investigation on a solid desiccant system integrated with a R407C compression air conditioner[J]. Energy Conversion and Management, 2009, 50(10): 2670-2679.
14	Dhar P L. Studies on solid desiccant based hybrid air-conditioning systems[J]. Applied Thermal Engineering, 2001, 21(2): 119-134.
15	Fong K F, Lee C K, Chow T T, et al. Investigation on solar hybrid desiccant cooling system for commercial premises with high latent cooling load in subtropical Hong Kong[J]. Applied Thermal Engineering, 2011, 31(16): 3393-3401.
16	Hürdoğan E, Büyükalaca O, Yilmaz T, et al. Experimental investigation of a novel desiccant cooling system[J]. Energy and Buildings, 2010, 42(11): 2049-2060.
17	Ghali K. Energy savings potential of a hybrid desiccant dehumidification air conditioning system in Beirut[J]. Energy Conversion and Management, 2008, 49(11): 3387-3390.
18	Angrisani G. Experimental investigation to optimise a desiccant HVAC system coupled to a small size cogenerator[J]. Applied Thermal Engineering, 2011, 31(4): 506-512.
19	涂壤, 刘晓华, 江亿. 不同固体除湿方式的热质交换过程分析及性能比较[J]. 化工学报, 2013, 64(6): 1939-1947.
	Tu R, Liu X H, Jiang Y. Heat and mass transfer analysis and performance comparison for different solid dehumidification methods[J]. CIESC Journal, 2013, 64(6): 1939-1947.
20	江宇. 基于吸附除湿换热器的热泵系统热力特性研究及其应用[D]. 上海: 上海交通大学, 2016.
	Jiang Y. Thermodynamic study and application on a desiccant coated heat exchanger based heat pump system[D]. Shanghai: Shanghai Jiao Tong University, 2016.
21	Li Z, Michiyuki S, Takeshi F. Experimental study on heat and mass transfer characteristics for a desiccant-coated fin-tube heat exchanger[J]. International Journal of Heat and Mass Transfer, 2015, 89: 641-651.
22	Jagirdar M, Lee P S. Mathematical modeling and performance evaluation of a desiccant coated fin-tube heat exchanger[J]. Applied Energy, 2018, 212: 401-415.
23	Erkek T U, Gungor A, Fugmann H, et al. Performance evaluation of a desiccant coated heat exchanger with two different desiccant materials[J]. Applied Thermal Engineering, 2018, 143: 701-710.
24	Oh S J, Ng K C, Chun W, et al. Evaluation of a dehumidifier with adsorbent coated heat exchangers for tropical climate operations[J]. Energy, 2017, 137: 441-448.
25	Enteria N, Mizutani K, Monma Y, et al. Experimental evaluation of the new solid desiccant heat pump system in Asia-Pacific climatic conditions[J]. Applied Thermal Engineering, 2011, 31(2/3): 243-257.
26	Aynur T N, Hwang Y, Radermacher R. Integration of variable refrigerant flow and heat pump desiccant systems for the cooling season[J]. Applied Thermal Engineering, 2010, 30(8/9): 917-927.
27	Aynur T N, Hwang Y, Radermacher R. Integration of variable refrigerant flow and heat pump desiccant systems for the heating season[J]. Energy and Buildings, 2010, 42(4): 468-476.
28	Tu Y D, Wang R Z, Ge T S, et al. Comfortable, high-efficiency heat pump with desiccant-coated, water-sorbing heat exchangers[J]. Scientific Reports, 2017, 7: 40437.
29	Tu Y D, Wang R Z, Ge T S. New concept of desiccant-enhanced heat pump[J]. Energy Conversion and Management, 2018, 156: 568-574.
30	Yang T Y, Ge T S, Lu F L, et al. A novel semi-coupled solid desiccant heat pump system(Part 1): Simulation study[J]. International Journal of Refrigeration, 2020, 120(5/6): 150-160.
31	Ge T S, Yang T Y, Lu F L, et al. A novel semi-coupled solid desiccant heat pump system(Part 2): Experimental investigation[J]. International Journal of Refrigeration, 2020, 121: 86-94.

部件	类型	设计功耗/kW	型号
压缩机	变频转子	2	WHP03240BSKNB7AT
电子膨胀阀	变频	1/2	DPF(T01)1.3C-07
四通阀		3	SHF(L)-4H-23U-52
板式换热器	钎焊式	4/5	B3-020

部件	类型	设计功耗/kW	型号
压缩机	变频转子	2	WHP03240BSKNB7AT
电子膨胀阀	变频	1/2	DPF(T01)1.3C-07
四通阀		3	SHF(L)-4H-23U-52
板式换热器	钎焊式	4/5	B3-020

参数	数值
管外径/mm	9.52
管内径/mm	7.85
翅片长度/mm	320.00
翅片间距/mm	2.50
翅片厚度/mm	0.15
管列数	4
管行数	12
流程	2
最大横截面积/m²	0.096
空气侧传热面积/m²	6.5

参数	数值
管外径/mm	9.52
管内径/mm	7.85
翅片长度/mm	320.00
翅片间距/mm	2.50
翅片厚度/mm	0.15
管列数	4
管行数	12
流程	2
最大横截面积/m²	0.096
空气侧传热面积/m²	6.5

参数	数值
回风温度/℃	23
回风相对湿度/%	55
处理空气中回风占比/%	100
处理空气风量/(m³/h)	326
蒸发温度/℃	15
冷凝温度/℃	50