石墨烯气凝胶的制备及其对水中油分的吸附特性

doi:10.11949/j.issn.0438-1157.20160786

化工学报 ›› 2016, Vol. 67 ›› Issue (12): 5048-5056.DOI: 10.11949/j.issn.0438-1157.20160786

石墨烯气凝胶的制备及其对水中油分的吸附特性

黄剑坤, 刘会娥, 黄扬帆, 马雁冰, 丁传芹

中国石油大学(华东)重质油国家重点实验室, 山东青岛 266580

收稿日期:2016-06-06 修回日期:2016-09-06 出版日期:2016-12-05 发布日期:2016-12-05
通讯作者: 刘会娥。liuhuie@upc.edu.cn
基金资助:
中央高校基本科研业务费专项资金（14CX05031A）；黄岛区科技项目（2014-1-49）。

Facile synthesis of graphene aerogels as high-performance adsorbents for diesel removal

HUANG Jiankun, LIU Hui'e, HUANG Yangfan, MA Yanbing, DING Chuanqin

State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Qingdao 266580, Shandong, China

Received:2016-06-06 Revised:2016-09-06 Online:2016-12-05 Published:2016-12-05
Supported by:
supported by the Fundamental Research Funds for the Central University(14CX05031A) and Huangdao District Science and Technology Project(2014-1-49).

摘要/Abstract

摘要：

以改性Hummers法制备出的氧化石墨（GO）为原料，乙二胺（EDA）为交联剂，通过液相化学交联法制备出以石墨烯为主体的多孔网状气凝胶（EGA）。利用电子扫描电镜（SEM）、电子透射电镜（TEM）及选区电子衍射（SAED）对其进行表征。以水中柴油为研究对象，考察所制EGA样品对水中柴油的吸附脱除效果。结果表明，石墨烯气凝胶对柴油的吸附量在前5 min上升迅速，在30 min左右达到吸附平衡。吸附过程遵循准二级动力学模型，且吸附速率随温度的升高而增加，体系的表观活化能E_a=23.94 kJ·mol^-1。颗粒内扩散模型拟合结果表明，EGA对水中柴油的吸附分为表面孔道吸附、气凝胶内部孔道扩散以及石墨烯片层间小孔道扩散。石墨烯气凝胶对柴油的吸附等温线与Freundlich模型较为吻合。

关键词: 石墨烯气凝胶, 化学交联, 多孔, 吸附动力学

Abstract:

Three dimensional(3D) graphene aerogels(EGA) with interconnected networks were fabricated from graphite oxide(GO) and ethylenediamine(EDA) via chemical crosslinking method. The properties of EGA were characterized by scanning electron microscope(SEM), transmission electron microscope(TEM) and selected area electron diffraction(SAED). Adsorption performance of the aerogel in removing diesel oil in water was investigated. The results showed that the EGA adsorption capacities rose quickly in the first 5 min, and reached adsorption equilibrium in 30 min. The kinetic analysis indicated that the EGA adsorption behavior can be accurately fitted with a pseudo second-order model, and the adsorption rate increased with the increase of temperature. The activation energy(E_a), determined by Arrhenius law, was 23.94 kJ·mol^-1, suggesting physical adsorption dominated the adsorption of diesel oil onto aerogels. The intraparticle diffusion model(IPD) fitting results revealed that the adsorption sites for aerogels consisted of external surface, large inner pore spaces and small-size pore spaces between the graphene sheets. The adsorption isotherms were well fitted with Freundlich model.

Key words: graphene aerogel, chemical crosslinking, porous, adsorption kinetics

中图分类号:

TQ013.2

黄剑坤, 刘会娥, 黄扬帆, 马雁冰, 丁传芹. 石墨烯气凝胶的制备及其对水中油分的吸附特性[J]. 化工学报, 2016, 67(12): 5048-5056.

HUANG Jiankun, LIU Hui'e, HUANG Yangfan, MA Yanbing, DING Chuanqin. Facile synthesis of graphene aerogels as high-performance adsorbents for diesel removal[J]. CIESC Journal, 2016, 67(12): 5048-5056.

参考文献 31

[1]	INAGAKI M, KAWAHARA A, NISHI Y, et al. Heavy oil sorption and recovery by using carbon fiber felts[J]. Carbon, 2002, 40(9):1487-1492.
[2]	ZHOU Y B, TANG X Y, HU X M, et al. Emulsified oily wastewater treatment using a hybrid-modified resin and activated carbon system[J]. Separation & Purification Technology, 2008, 63(2):400-406.
[3]	RAJAKOVIC V, ALEKSIC G, RADETIC M, et al. Efficiency of oil removal from real wastewater with different sorbent materials[J]. Journal of Hazardous Materials, 2007, 143(1/2):494-499.
[4]	IBRAHIM S, WANG S, ANG H M. Removal of emulsified oil from oily wastewater using agricultural waste barley straw[J]. Biochemical Engineering Journal, 2010, 49(1):78-83.
[5]	LI H, LIU L, YANY F. Covalent assembly of 3D graphene/polypyrrole foams for oil spill cleanup[J]. Journal of Materials Chemistry A, 2013, 1(10):3446-3453.
[6]	ZENG Y, WANG K, YAO J, et al. Hollow carbon beads fabricated by phase inversion method for efficient oil sorption[J]. Carbon, 2014, 69(69):25-31.
[7]	KABIRIS, TRAN D N H, ALTALHI T, et al. Outstanding adsorption performance of graphene-carbon nanotube aerogels for continuous oil removal[J]. Carbon, 2014, 80(1):523-533.
[8]	NOVOSELOV K S, GEIM A K, MOROZOV S V, et al. Electric field effect in atomically thin carbon films[J]. Science, 2004, 306(5696):666-669.
[9]	ZHU Y W, MURALI S, CAI W W, et al. Graphene and graphene oxide:synthesis, properties, and applications[J]. Advanced Materials, 2010, 22(46):5226-5226.
[10]	KEMP K C, SEEMA H, SALEH M, et al. Environmental applications using graphene composites:water remediation and gas adsorption.[J]. Nanoscale, 2013, 5(8):3149-3171.
[11]	STANKOVICH S, DIKIN D A, PINER R D, et al. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide[J]. Carbon, 2007, 45(7):1558-1565.
[12]	HU H, ZHAO Z, WAN W, et al. Ultralight and highly compressible graphene aerogels[J]. Advanced Materials, 2013, 25(15):2219-2223.
[13]	SUN H, XU Z, GAO C. Multifunctional, ultra-flyweight, synergistically assembled carbon aerogels[J]. Advanced Materials, 2013, 25(18):2554-2560.
[14]	LI J, JI L, MENG H, et al. Ultra-light, compressible and fire-resistant graphene aerogel as a highly efficient and recyclable absorbent for organic liquids[J]. J. Mater. Chem. A, 2014, 2(9):2934-2941.
[15]	ZHAO H C, HU C, HU Y, et al. A versatile, ultralight, nitrogen-doped graphene framework[J]. Angewandte Chemie International Edition, 2012, 124(45):11533-11537.
[16]	CONG H P, REN X C, WANG P, et al. Macroscopic multifunctional graphene-based hydrogels and aerogels by a metal ion induced self-assembly process[J]. Acs Nano, 2012, 6(3):2693-2703.
[17]	朱慧, 刘会娥, 黄剑坤,等. 多壁碳纳米管吸附处理柴油废水的动力学特性[J]. 化工学报, 2015, 66(12):4865-4873. ZHU H, LIU H E, HUANG J K, et al. Kinetics for adsorption treatment of diesel oil waste water by multi-walled carbon nanotubes[J]. CIESC Journal, 2015, 66(12):4865-4873.
[18]	HUMMERS W S, OFFEMAN R E. Preparation of graphitic oxide[J]. Journal of the American Chemical Society, 1958, 80(6):1339.
[19]	BECERRIL H A, MAO J, LIU Z, et al. Evaluation of solution-processed reduced graphene oxide films as transparent conductors.[J]. Acs Nano, 2008, 2(3):463-470.
[20]	PHAM H D, PHAM V H, CUONG T V, et al. Synthesis of the chemically converted graphene xerogel with superior electrical conductivity[J]. Chemical Communications, 2011, 47(34):9672-9674.
[21]	LI Y, SHENG K, YUAN W, et al. A high-performance flexible fibre-shaped electrochemical capacitor based on electrochemically reduced graphene oxide[J]. Chemical Communications, 2013, 49(3):291-293.
[22]	ALI I. New generation adsorbents for water treatment[J]. Chemical Reviews, 2012, 112(10):5073-5091.
[23]	HO Y S, MCKAY G. Pseudo-second order model for sorption processes[J]. Process biochemistry, 1999, 34(5):451-465.
[24]	NOLLET H, ROELS M, LUTGEN P, et al. Removal of PCBs from wastewater using fly ash[J]. Chemosphere, 2003, 53(6):655-665.
[25]	HUANG G, WANG W, MI X, et al. Preparation of graphene oxide aerogel and its adsorption for Cu2+ ions[J]. Carbon, 2012, 50(13):4856-4864.
[26]	TANG W W, ZENG G M, GONG J L, et al. Simultaneous adsorption of atrazine and Cu(Ⅱ) from wastewater by magnetic multi-walled carbon nanotube[J]. Chemical Engineering Journal, 2012, 211(22):470-478.
[27]	CHEUNG W H, SZETO Y S, MCKAY G. Intraparticle diffusion processes during acid dye adsorption onto chitosan[J]. Bioresource Technology, 2007, 98(15):2897-2904.
[28]	FIGARO S, AVRIL J P, BROUERS F, et al. Adsorption studies of molasse's wastewaters on activated carbon:modelling with a new fractal kinetic equation and evaluation of kinetic models[J]. Journal of Hazardous Materials, 2009, 161(2/3):649-656.
[29]	ANNUNCIADO T R, SYDENSTRICKERT H D, AMICO S C. Experimental investigation of various vegetable fibers as sorbent materials for oil spills[J]. Marine Pollution Bulletin, 2005, 50(11):1340-1346.
[30]	BAYAT A, AGHAMIRI S F, MOHEB A, et al. Oil spill cleanup from sea water by sorbent materials[J]. Chemical Engineering & Technology, 2005, 28(12):1525-1528.
[31]	TEMKIN M I, PYZHEV V. Kinetic of ammonia synthesis on promoted iron catalysts[J]. The Journal of Physical Chemistry, 1940, 12(3):851-867.

石墨烯气凝胶的制备及其对水中油分的吸附特性

Facile synthesis of graphene aerogels as high-performance adsorbents for diesel removal

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 31

相关文章 15

编辑推荐

Metrics

本文评价

[1]	葛加丽, 管图祥, 邱新民, 吴健, 沈丽明, 暴宁钟. 垂直多孔碳包覆的FeF₃正极的构筑及储锂性能研究[J]. 化工学报, 2023, 74(7): 3058-3067.
[2]	王海, 林宏, 王晨, 许浩洁, 左磊, 王军锋. 高压静电场强化多孔介质表面沸腾传热特性研究[J]. 化工学报, 2023, 74(7): 2869-2879.
[3]	张琦钰, 高利军, 苏宇航, 马晓博, 王翊丞, 张亚婷, 胡超. 碳基催化材料在电化学还原二氧化碳中的研究进展[J]. 化工学报, 2023, 74(7): 2753-2772.
[4]	贾晓宇, 杨剑, 王博, 林梅, 王秋旺. 金属丝网毛细特性的孔隙尺度数值分析[J]. 化工学报, 2023, 74(5): 1928-1938.
[5]	顾浩, 张福建, 刘珍, 周文轩, 张鹏, 张忠强. 力电耦合作用下多孔石墨烯膜时间维度的脱盐性能及机理研究[J]. 化工学报, 2023, 74(5): 2067-2074.
[6]	王晓萱, 胡晓红, 陆雨楠, 王士勇, 凡凤仙. 旋转膜过滤器内部流动特性数值模拟[J]. 化工学报, 2023, 74(4): 1489-1498.
[7]	张银宁, 王进卿, 冯致, 詹明秀, 徐旭, 张光学, 池作和. 升温条件下多孔介质内气泡的生长和聚并行为[J]. 化工学报, 2023, 74(4): 1509-1518.
[8]	杨辉著, 兰精灵, 杨月, 梁嘉林, 吕传文, 朱永刚. 高功率平板热管传热性能的实验研究[J]. 化工学报, 2023, 74(4): 1561-1569.
[9]	胡香凝, 尹渊博, 袁辰, 是赟, 刘翠伟, 胡其会, 杨文, 李玉星. 成品油在土壤中运移可视化的实验研究[J]. 化工学报, 2023, 74(4): 1827-1835.
[10]	钱志广, 樊越, 王世学, 岳利可, 王金山, 朱禹. 吹扫条件对PEMFC阻抗弛豫现象和低温启动的影响[J]. 化工学报, 2023, 74(3): 1286-1293.
[11]	宇国佳, 靳冬玉, 周智勇, 张帆, 任钟旗. 多孔液体的设计合成与应用研究进展[J]. 化工学报, 2023, 74(1): 257-275.
[12]	陈献富, 王冬雨, 范益群, 邢卫红, 乔旭. 基于3D打印的多孔陶瓷膜研究进展[J]. 化工学报, 2023, 74(1): 105-115.
[13]	党迎喜, 谈朋, 刘晓勤, 孙林兵. 辐射冷却和太阳能加热驱动的CO₂变温捕获[J]. 化工学报, 2023, 74(1): 469-478.
[14]	陈余, 郑晓妍, 赵辉, 王二强, 李杰, 李春山. Pickering乳液催化非均相羟醛缩合反应研究[J]. 化工学报, 2023, 74(1): 449-458.
[15]	郎雪梅, 姚柳眉, 樊栓狮, 李刚, 王燕鸿. 多孔材料中甲烷水合物生成的传热数值模拟研究[J]. 化工学报, 2022, 73(9): 3851-3860.