湿工况下平翅片平面凝水形成及运动过程的数值模拟与实验验证

doi:10.3969/j.issn.0438-1157.2014.z2.021

化工学报 ›› 2014, Vol. 65 ›› Issue (z2): 140-147.DOI: 10.3969/j.issn.0438-1157.2014.z2.021

湿工况下平翅片平面凝水形成及运动过程的数值模拟与实验验证

杨艺菲, 庄大伟, 胡海涛, 韩维哲, 丁国良, 熊伟

上海交通大学制冷与低温工程研究所, 上海 200240

收稿日期:2014-08-15 修回日期:2014-08-27 出版日期:2014-12-30 发布日期:2014-12-30
通讯作者: 丁国良

Numerical simulation and experimental validation of water condensing and moving on plain-fin surface under dehumidifying conditions

YANG Yifei, ZHUANG Dawei, HU Haitao, HAN Weizhe, DING Guoliang, XIONG Wei

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240, China

Received:2014-08-15 Revised:2014-08-27 Online:2014-12-30 Published:2014-12-30

摘要/Abstract

摘要：

了解析湿过程中冷凝水对换热器翅片侧换热和压降的影响机制,需要首先建立湿工况下翅片表面冷凝水滴形成及运动过程的模型。本文通过对翅片表面上冷凝水滴的形成和运动机制进行分析,建立水滴形成过程的传质传热模型以及接触角模型,并结合VOF界面追踪方法来描述气液相界面、计算表面张力,从而预测冷凝水滴在竖直翅片表面形成及运动过程。通过实验对模型的可靠性进行了验证:对于传热系数,模型计算结果与实验数据平均误差为6.9%,模型对于96%的实验数据点预测误差在±15%以内;对于传质系数,模型计算结果与实验平均误差为12.1%,模型对于91%的实验数据点预测误差在±20%以内;对于翅片表面水滴形成和运动过程,模型计算结果与可视化实验结果能够较好地吻合。

关键词: 翅片表面, 液滴, 冷凝, 运动, 数值模型

Abstract:

In order to predict the performance of tube-finned heat exchangers under dehumidifying condition, the behavior of condensing liquid droplet on vertical plain-fin surfaces should be known. The objective of this article is to develop a model for liquid droplet condensation and motion on vertical plain-fin surfaces. To achieve this goal, the mechanisms of droplet condensation and motion are analyzed firstly. Then the equations for predicting the heat and mass transfer rate during the water condensation are established, and a Volume of Fluid-Continuous Surface Force model with varying contact angles along the contact line is developed to predict droplet movement. The prediction ability was verified by the experimental data, and verification results show that: the simulation results of j_h agree with 96% of the experimental data within the deviation of ±15%, and the mean deviation is 6.9%; the simulation results of j_m agree with 91% of the experimental data within the deviation of ±20%, and the mean deviation is 12.1%.

Key words: fin surface, liquid droplet, condensation, motion, numerical model

中图分类号:

TK124

杨艺菲, 庄大伟, 胡海涛, 韩维哲, 丁国良, 熊伟. 湿工况下平翅片平面凝水形成及运动过程的数值模拟与实验验证[J]. 化工学报, 2014, 65(z2): 140-147.

YANG Yifei, ZHUANG Dawei, HU Haitao, HAN Weizhe, DING Guoliang, XIONG Wei. Numerical simulation and experimental validation of water condensing and moving on plain-fin surface under dehumidifying conditions[J]. CIESC Journal, 2014, 65(z2): 140-147.

参考文献 23

[1]	Comini G, Corteila G, Saro O. Finite element analysis of coupled conduction and convection in refrigerated transport[J]. Int. J. Refrig., 1995, 18(2): 123-131
[2]	Chang Y J, Wang C C. A generalized heat transfer correlation for louver fin geometry[J]. Int. J. Heat Mass Transfer, 1997, 40(3): 533-544
[3]	Wang CC, Fu W L, Chang C T. Heat transfer and friction characteristics of typical wavy fin-and-tube heat exchangers[J]. Exp. Therm. Fluid Sci., 1997, 14(2): 174-186
[4]	Wang CC, Chang C T. Heat and mass transfer for plate fin-and-tube heat exchangers, with and without hydrophilic coating[J]. Int. J. Heat Mass Transfer, 1998, 41(20): 3109-3120
[5]	Korte C, Jacobi A M. Condensate retention effects on the performance of plain-fin-and-tube heat exchangers: retention data and modeling[J]. J. Heat Trans-T ASME, 2001, 123(5): 926-936
[6]	Sommers A D, Ying J, Eid K F. Predicting the onset of condensate droplet departure from a vertical surface due to air flow—applications to topographically-modified, micro-grooved surfaces[J]. Exp. Therm. Fluid Sci., 2012, 40: 38-49
[7]	Ma X K, Ding G L, Zhang Y M, Wang K J. Effects of hydrophilic coating on air side heat transfer and friction characteristics of wavy fin and tube heat exchangers under dehumidifying conditions[J]. Energ. Convers. Manage., 2007, 48(9): 2525-2532
[8]	Wang C C, Hsieh Y C, Lin Y T. Performance of plate finned tube heat exchangers under dehumidifying conditions[J]. J. Heat Trans-T ASME, 1997, 119(1): 109-117
[9]	Halici F, Taymaz I, Gunduz M. The effect of the number of tube rows on heat, mass and momentum transfer in flat-plate finned tube heat exchangers[J]. Energy, 2001, 26(11): 963-972
[10]	Wang C C, Lin Y T, Lee C J. An airside correlation for plain fin-and-tube heat exchangers in wet conditions[J]. Int. J. Heat Mass Transfer, 2000, 43:1869-1872
[11]	Lin Y T, Hwang Y M, Wang C C. Performance of the herringbone wavy fin under dehumidifying conditions[J]. Int. J. Heat Mass Transfer, 2002, 45(25): 5035-5044
[12]	Wang C C, Du Y J, Chang Y J, Tao W H. Airside performance of herringbone fin-and-tube heat exchangers in wet conditions[J]. Can. J. Chem. Eng., 1999, 77(6): 1225-1230
[13]	Wang C C, Lee W S, Sheu W J, Chang Y J. Parametric study of the air-side performance of slit fin-and-tube heat exchangers in wet conditions[J]. P I Mech. Eng. C-J Mec., 2001, 215(9): 1111-1122
[14]	Wang C C, Lin Y T, Lee C J. Heat and momentum transfer for compact louvered fin-and-tube heat exchangers in wet conditions[J]. Int. J. Heat Mass Transfer, 2000, 43(18): 3443-3452
[15]	Comini G, Nonino C, Savino S. Modeling of coupled conduction and convection in moist air cooling[J]. Numer. Heat Tr A-Appl., 2007, 51: 23-27
[16]	Comini G, Nonino C, Savino S. Modeling of conjugate conduction and heat and mass convection in tube-fin exchangers[J]. Int. J. Numer. Method H, 2008, 18(7/8): 954-968
[17]	Yang B,Sekhar S C. Numerical algorithm study of CFD modeling for a compartmented cooling coil under dehumidifying conditions[J]. Numer. Heat Tr A-Appl., 2007, 52: 737-755
[18]	Frenkel Y I. On the behavior of liquid drops on a solid surface (Ⅰ): The sliding of drops on an inclined surface[J]. J. Exp. Theor. Phys., 1948, 18: 695
[19]	ElSherbini A I, Jacobi A M. Liquid drops on vertical and inclined surfaces (Ⅰ): An experimental study of drop geometry[J]. J. Colloid Interface Sci., 2004, 273: 556-565
[20]	ElSherbini A I, Jacobi A M. Liquid drops on vertical and inclined surfaces (Ⅱ): A method for approximating drop shapes[J]. J. Colloid Interface Sci., 2004, 273: 566-575
[21]	Annapragada S R, Murthy J Y, Garimella S V. Droplet retention on an incline[J]. Int. J. Heat Mass Transfer, 2012, 55(5/6): 1457-1465
[22]	Tannehill J C, Pletcher R H, Anderson D A. Computational Fluid Mechanic and Heat Transfer[M]. London: Routledge, 1997
[23]	Beard K V,Pruppacher H R. Determination of the terminal velocity and drag of small water drops by means of a wind tunnel[J]. J. Atmos. Sci., 1969, 26(5): 1066

湿工况下平翅片平面凝水形成及运动过程的数值模拟与实验验证

Numerical simulation and experimental validation of water condensing and moving on plain-fin surface under dehumidifying conditions

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 23

相关文章 15

编辑推荐

Metrics

本文评价

[1]	吴馨, 龚建英, 靳龙, 王宇涛, 黄睿宁. 超声波激励下铝板表面液滴群输运特性的研究[J]. 化工学报, 2023, 74(S1): 104-112.
[2]	苏伟, 马东旭, 金旭, 刘忠彦, 张小松. 表面润湿性对霜层传递特性影响可视化实验研究[J]. 化工学报, 2023, 74(S1): 122-131.
[3]	周晓庆, 李春煜, 杨光, 蔡爱峰, 吴静怡. 液滴撞击不同曲率过冷波纹面结冰动力学行为及机理研究[J]. 化工学报, 2023, 74(S1): 141-153.
[4]	毕丽森, 刘斌, 胡恒祥, 曾涛, 李卓睿, 宋健飞, 吴翰铭. 粗糙界面上纳米液滴蒸发模式的分子动力学研究[J]. 化工学报, 2023, 74(S1): 172-178.
[5]	邹启宏, 李乾, 葛天舒. 基于多目标下的两级并联除湿热泵系统实验研究[J]. 化工学报, 2023, 74(S1): 265-271.
[6]	何宣志, 何永清, 闻桂叶, 焦凤. 磁液液滴颈部自相似破裂行为[J]. 化工学报, 2023, 74(7): 2889-2897.
[7]	张贲, 王松柏, 魏子亚, 郝婷婷, 马学虎, 温荣福. 超亲水多孔金属结构驱动的毛细液膜冷凝及传热强化[J]. 化工学报, 2023, 74(7): 2824-2835.
[8]	李正涛, 袁志杰, 贺高红, 姜晓滨. 疏水界面上的NaCl液滴蒸发过程内环流调控机制研究[J]. 化工学报, 2023, 74(5): 1904-1913.
[9]	邓璐, 巨晓洁, 张文杰, 谢锐, 汪伟, 刘壮, 潘大伟, 褚良银. 微流控法可控制备放射性壳聚糖栓塞微球[J]. 化工学报, 2023, 74(4): 1781-1794.
[10]	贾露凡, 王艺颖, 董钰漫, 李沁园, 谢鑫, 苑昊, 孟涛. 微流控双水相贴壁液滴流动强化酶促反应研究[J]. 化工学报, 2023, 74(3): 1239-1246.
[11]	朱兵国, 何吉祥, 徐进良, 彭斌. 冷却条件下渐扩/渐缩管内超临界压力二氧化碳的传热特性[J]. 化工学报, 2023, 74(3): 1062-1072.
[12]	何洋, 高森虎, 吴青云, 张明理, 龙涛, 牛佩, 高景辉, 孟颖琪. 析湿工况下平直开缝翅片传热传质特性的数值研究[J]. 化工学报, 2023, 74(3): 1073-1081.
[13]	杨星宇, 马优, 朱春英, 付涛涛, 马友光. 梳状并行微通道内液液分布规律研究[J]. 化工学报, 2023, 74(2): 698-706.
[14]	项星宇, 王忠东, 董艳鹏, 李守川, 朱春英, 马友光, 付涛涛. 微通道内屈服应力型流体的流变特性及多相流研究进展[J]. 化工学报, 2023, 74(2): 546-558.
[15]	贾龙菲, 付少童, 向星, 张华海, 张弢, 王利民. 颗粒振动影响动量传递过程的格子Boltzmann方法模拟[J]. 化工学报, 2023, 74(2): 735-747.