涡发生器与螺旋片强化不同曲率的壳侧传热

doi:10.3969/j.issn.0438-1157.2013.09.017

化工学报 ›› 2013, Vol. 64 ›› Issue (9): 3198-3205.DOI: 10.3969/j.issn.0438-1157.2013.09.017

涡发生器与螺旋片强化不同曲率的壳侧传热

张丽¹, 谢彩朋¹, 李雅侠², 吴剑华²

1. 沈阳化工大学化学工程学院, 辽宁沈阳 110142;
2. 沈阳化工大学能源与动力工程学院, 辽宁沈阳 110142

收稿日期:2013-01-11 修回日期:2013-03-22 出版日期:2013-09-05 发布日期:2013-09-05
通讯作者: 吴剑华
作者简介:张丽(1975- ),女,博士,副教授。
基金资助:
中央支持地方高校发展专项资金项目(2050205);辽宁省博士启动基金计划项目(20131093)。

Heat transfer enhancement with helical fins and vortex generators on shells at different curvatures

ZHANG Li¹, XIE Caipeng¹, LI Yaxia², WU Jianhua²

1. School of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang 110142, Liaoning, China;
2. School of Energy and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, Liaoning, China

Received:2013-01-11 Revised:2013-03-22 Online:2013-09-05 Published:2013-09-05

摘要/Abstract

摘要： 为考察涡发生器与螺旋片对不同曲率的套管式换热器壳侧的传热强化效果,在不同中径的壳侧安装了相同密度的螺旋片和三角翼型涡发生器。以空气为介质,在Re=680～16000范围内,采用实验和数值模拟方法研究了壳侧的传热和阻力特性,考察了不同曲率下复合强化的壳侧的综合性能,分析了传热强化机理。结果表明,曲率越大,壳侧传热系数越高,摩擦因数越大。对曲率分别为0.131、0.321和0.440的3种换热器壳侧,涡发生器将其传热系数平均提高了31.52%、20.83%和18.33%。小曲率和复合强化的壳侧综合性能更好。涡发生器改变了换热器壳侧的流场结构,提高了速度场和温度场之间的协同性,从而提高了换热器壳侧的传热效果。

关键词: 涡发生器, 螺旋片, 套管式换热器, 强化传热

Abstract: To examine the heat transfer performance of compound enhancement with helical fins and vortex generators for the shell of double-pipe heat exchangers at different curvatures,helical fins and delta-winglet-pair vortex generators are installed on the shell side with different middle diameters at the same pitch.Heat transfer and pressure drop characteristics on the shell side are investigated experimentally and numerically at Re=680—16000 with air as working fluid.The comprehensive performance on the shell side is enhanced and the enhancement mechanism is analyzed.The results show that larger curvature of the shell leads higher heat transfer coefficient and friction factor.For curvatures of 0.131,0.321 and 0.440,heat transfer coefficient is increased by 31.52%,20.83% and 18.33%,respectively,with vortex generators. Vortex generators can change the fluid flow structure and improve the synergy of velocity field and temperature field,so the heat transfer on the shell side is improved.

Key words: vortex generator, helical fin, double-pipe heat exchanger, heat transfer enhancement

中图分类号:

TK124

张丽, 谢彩朋, 李雅侠, 吴剑华. 涡发生器与螺旋片强化不同曲率的壳侧传热[J]. 化工学报, 2013, 64(9): 3198-3205.

ZHANG Li, XIE Caipeng, LI Yaxia, WU Jianhua. Heat transfer enhancement with helical fins and vortex generators on shells at different curvatures[J]. CIESC Journal, 2013, 64(9): 3198-3205.

参考文献 18

[1]	Eason R M,Bayazitoglu Y,Miade A.Enhancement of heat transfer in square helical ducts[J].Int.J.Heat Mass Transfer,1994,37(14):2077-2087
[2]	Thomson D L,Bayazitoglu Y,Meade Jr A J.Low dean number convective heat transfer in helical ducts of rectangular cross section[J].J.Heat Transfer,1998, 120(1):84-91
[3]	Bergles A E.ExHFT for fourth generation heat transfer technology[J].Exp.Therm.Fluid Sci.,2002,26:335-344
[4]	James E,Brien O,Manohar S,et al.Heat transfer enhancement for finned-tube heat exchangers with winglets[J].J.Heat Trans.,2005,127:171-178
[5]	Wang Q W,Chen Q Y,Wang L,Zeng M,Huang Y P,Xiao Z J.Experimental study of heat transfer enhancement in narrow rectangular channel with longitudinal vortex generators[J].Nuclear Engineering and Design,2007,237(7):686-693
[6]	Sahiti N,Durst F,Dewan A.Heat transfer enhancement by pin elements[J].Int.J.Heat Mass Trans.,2005,48:4738-4747
[7]	Wang Ling(王令),Chen Qiuyang(陈秋炀),Zeng Min(曾敏),Zhou Yangeng(周砚耕),Wang Qiuwang(王秋旺),Huang Yanping(黄彦平),Xiao Zejun(肖泽军).Heat transfer enhancement in rectangular narrow channel with longitudinal vortex generators[J].Journal of Chemical Industry and Engineering(China)(化工学报),2006,57(11):2549-2553
[8]	Fiebig M,Valencia A,Mitra N K.Wing-type vortex generators for fin-and-tube heat exchangers[J].Exp.Therm.Fluid Sci.,1993,7(4):287-295
[9]	Joardar A,Jacobi A M.Impact of leading edge delta-wing vortex generators on the thermal performance of a flat tube,louvered-fin compact heat exchanger[J].Int.J. Heat Mass Trans.,2005,48(8):1480-1493
[10]	Fiebig M,Kallweit P,Mitra N,Tiggelbeck S.Heat transfer enhancement and drag by longitudinal vortex generators in channel flow[J].Exp.Therm.Fluid Sci.,1991,4:103-114
[11]	Zhang L,Guo H M,Wu J H,Du W J.Compound heat transfer enhancement for shell side of double-pipe heat exchanger by helical fins and vortex generators[J].Heat Mass Transfer,2012,48 :1113-1124
[12]	Akcayoglu A.Flow past confined delta-wing type vortex generators[J].Exp.Therm.Fluid Sci.,2011,35:112-120
[13]	Dement'eva K V,Aronov I S.Hydrodynamics and heat transfer in curvilinear channels with rectangular cross section[J].J.Engng.Phys.(Russian),1978,34(6):994-1000
[14]	Joye D D,Hakun A G,Joye C D.Heat transfer in helical,curved rectangular channels-comparison of type Ⅰ and type Ⅱ systems[J].Heat Mass Transfer,1993,36(14):3541-3546
[15]	Liu S,Masliyah J H.Axially-invariant laminar flow in helical pipes with a finite pitch[J].J.Fluid Mech.,1993,251:315-353
[16]	Webb R L.Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design[J].Int. J. Heat Mass Transfer,1981,24(4):715-726
[17]	Zhang Li(张丽),Xing Yanwei(邢彦伟),Wu Jianhua(吴剑华).Fluid flow characteristic in helical duct with rectangular cross section[J].CIESC Journal(化工学报),2010,61(5):1089-1096
[18]	Li Y X,Wu J H,Zhang L,Kou L P.Comparison of fluid flow and heat transfer behavior in outer and inner half coil jackets and field synergy analysis[J].Applied Thermal Engineering,2011,31:3078-3083

涡发生器与螺旋片强化不同曲率的壳侧传热

Heat transfer enhancement with helical fins and vortex generators on shells at different curvatures

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 18

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[2]	张贲, 王松柏, 魏子亚, 郝婷婷, 马学虎, 温荣福. 超亲水多孔金属结构驱动的毛细液膜冷凝及传热强化[J]. 化工学报, 2023, 74(7): 2824-2835.
[3]	王海, 林宏, 王晨, 许浩洁, 左磊, 王军锋. 高压静电场强化多孔介质表面沸腾传热特性研究[J]. 化工学报, 2023, 74(7): 2869-2879.
[4]	林志敏, 王崇兆, 强国智, 刘树山, 王良璧. 润滑油在内插同轴交叉翼型涡产生器管内流动与传热特性分析[J]. 化工学报, 2022, 73(11): 4957-4973.
[5]	李凡, 陆高锋, 马光柏, 翟晓强, 杨顺法. 纵向涡强化圆管内换热的数值模拟及性能分析[J]. 化工学报, 2021, 72(S1): 120-126.
[6]	林伟翔, 苏港川, 陈强, 文键, 王斯民. 基于超声技术的沉浸式换热器强化传热研究[J]. 化工学报, 2021, 72(8): 4055-4063.
[7]	高峰, 陈永昌, 赵金龙, 马重芳. 磁场对熔盐射流冲击传热的影响[J]. 化工学报, 2020, 71(S2): 92-97.
[8]	郎中敏, 吴刚强, 赫文秀, 韩晓星, 苟延梦, 李双莹. 二氧化铈/水基纳米流体核沸腾传热特性[J]. 化工学报, 2020, 71(5): 2061-2068.
[9]	刘占斌, 何雅玲, 王坤, 马朝, 姜涛. 泡沫填充方式对管内超临界CO₂流动换热的影响研究[J]. 化工学报, 2019, 70(9): 3329-3336.
[10]	高兴辉, 周帼彦, 涂善东. 缠绕管式换热器壳程强化传热性能影响因素分析[J]. 化工学报, 2019, 70(7): 2456-2471.
[11]	陈景祥, 李蔚, 朱华, 金春花, 杜锦才, 张政江, 刘丽. 三维双侧强化管内R410A蒸发换热特性[J]. 化工学报, 2018, 69(S2): 76-81.
[12]	黄金, 李晓朋, 王婷, 胡艳鑫, 盛鑫鑫. 基于MWCNTs/PA复合材料铜表面处理的传热性能[J]. 化工学报, 2018, 69(7): 2956-2963.
[13]	张丽, 尚勃均, 李雅侠, 王翠华, 孟辉波, 龚斌, 吴剑华. 流线型涡发生器与螺旋片强化换热器壳侧传热[J]. 化工学报, 2017, 68(4): 1349-1357.
[14]	葛铭, 赵利杰, 戴维葆, 蔡培, 舒少辛, 杨海瑞, 吕俊复. 叉排三维外肋管的传热特性[J]. 化工学报, 2017, 68(10): 3733-3738.
[15]	康亚盟, 刁彦华, 赵耀华, 汪顺. 纳米复合相变蓄热材料的制备与特性[J]. 化工学报, 2016, 67(S1): 372-378.