AA/PTA单体比例对PBAT共聚酯性能的影响

doi:10.11949/j.issn.0438-1157.20160888

化工学报 ›› 2017, Vol. 68 ›› Issue (1): 452-459.DOI: 10.11949/j.issn.0438-1157.20160888

• 材料化学工程与纳米技术 • 上一篇下一篇

AA/PTA单体比例对PBAT共聚酯性能的影响

赵彩霞, 柏祥, 邹国享, 何英杰, 李锦春

江苏省材料表面科学与技术重点实验室, 常州大学, 江苏常州 213164

收稿日期:2016-06-27 修回日期:2016-09-18 出版日期:2017-01-05 发布日期:2017-01-05
通讯作者: 李锦春
基金资助:
江苏省青年基金项目（BK20130255）；江苏省高校自然科学研究面上项目（15KJB150001）。

Effect of monomer ratio of AA to PTA on properties of PBAT copolyesters

ZHAO Caixia, BAI Xiang, ZOU Guoxiang, HE Yingjie, LI Jinchun

Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, Jiangsu, China

Received:2016-06-27 Revised:2016-09-18 Online:2017-01-05 Published:2017-01-05
Contact: 10.11949/j.issn.0438-1157.20160888
Supported by:
supported by the Jiangsu Province Youth Fund (BK20130255), Jiangsu Province Universities Natural Science Research Program Projects(15KJB150001).

摘要/Abstract

摘要：

以己二酸（AA）、对苯二甲酸（PTA）和1，4-丁二醇（BDO）为原料，钛酸四丁酯为催化剂，采用先酯化后缩聚的两步聚合法制备了一系列聚（己二酸/对苯二甲酸丁二醇）（PBAT）共聚酯。研究己二酸与对苯二甲酸不同摩尔比对合成共聚酯的结构、热性能和弹性性能的影响。FTIR和NMR测试结果表明本实验成功合成了PBAT共聚酯。GPC测试结果表明共聚酯的重均分子量（M_w）在41000~142000之间，测试结果与特性黏度具有一致性。DSC测试结果表明随己二酸含量的增加，共聚酯的熔融温度和结晶温度逐渐降低；WXRD测试结果表明随着己二酸含量的不断增加，共聚酯的晶型结构逐渐由PBA转变为PBT；DMA结果表明玻璃化转变温度（T_g）基本呈不断降低的趋势；TGA结果表明PBAT共聚酯的初始分解温度随对苯二甲酸含量的增加向高温区移动，而在高温段共聚酯的热稳定性接近。拉伸结果表明，AA/PTA比例的变化显著影响共聚酯的力学弹性，PBAT7：3具有最大的断裂伸长率，而PBAT3：7则表现为强而韧的拉伸特性。

关键词: PBAT, 合成, 单体比例, 热性能, 力学性能

Abstract:

Poly(butyleneadipate-co-terephthalate)(PBAT) copolyesters were synthesized from adipic acid(AA), p-phthalic acid(PTA) and 1, 4-butanediol(BDO) with tetrabutyl titanate as catalyst through a two-step process of esterification and polycondesation.The effects of molar ratio of AA to PTA on the structures, thermal and elastic properties of copolyesters were studied.FTIR and NMR test results showed that PBAT copolyesters were successfully synthesized.GPC test showed the molecular weight(M_w) of copolyesters were between 41000-142000, which was consistent with the result of the intrinsic viscosity.DSC results showed that T_m and T_c were gradually reduced with the increase of adipic acid.WXRD test results indicated that with the increase of adipic acid, the crystal structure copolyesters gradually changed from PBA into PBT.DMA results showed that the T_g of copolyesters trended to decrease with the increase of adipic acid.From TGA curves, the initial decomposition temperature of PBAT copolyesters shifted to the high temperature zone, while the thermal stability of the copolyesters closed at high temperature.It was found from the tensile test that the AA/PTA ratio significantly affected the mechanical properties of copolyesters.PBAT7:3 was of the maximum elongation at break, and PBAT3:7 was of strong and tough tensile properties.

Key words: PBAT, synthesis, monomer ratio, thermal properties, mechanical properties

中图分类号:

TQ31.6

赵彩霞, 柏祥, 邹国享, 何英杰, 李锦春. AA/PTA单体比例对PBAT共聚酯性能的影响[J]. 化工学报, 2017, 68(1): 452-459.

ZHAO Caixia, BAI Xiang, ZOU Guoxiang, HE Yingjie, LI Jinchun. Effect of monomer ratio of AA to PTA on properties of PBAT copolyesters[J]. CIESC Journal, 2017, 68(1): 452-459.

参考文献 20

[1]	WITT U, MÜLLER R J, DECKWER W D. Biodegradation behaviour and material properties of aliphatic/aromatic polyesters of commercial importance[J]. J. Environ. Polym. Degrad., 1997, 5(2):81-89.
[2]	PIOTR R, MICHA? K, MICHA? S, et al. Study of aliphatic-aromatic copolyester degradation in sandy soil and its ecotoxicological impact[J]. Biomacromolecules, 2010, 11(4):839-847.
[3]	ABOU-ZEID D M, MÜLLER R J, DECKWER W D. Biodegradation of aliphatic homopolyesters and aliphatic-aromatic copolyesters by anaerobic microorganisms[J]. Biomacromolecules, 2004, 5(5):1687-1697.
[4]	AJIOKA M, SUIZU H, HIGUCHI C, et al. Aliphatic polyesters and their copolymers synthesized through directcondensation polymerization[J].Polymer Degradation and Stability, 1998, 59(1/2/3):137-143.
[5]	NICOLAS J, RENÉ S L, PASCAULT J P, et al. Bio-based alternatives in the synthesis of aliphatic-aromatic polyesters dedicated to biodegradable film applications[J]. Polymer, 2015, 59:234-242.
[6]	MOHANTY S, NAYAK S K.Aromatic-aliphatic poly(butylene adipate-co-terephthalate) bionanocomposite influence of organic modification on structure and properties[J]. Polymer Composites, 2010, 31(7):1194-1204.
[7]	HERRERA R, FNAREO L, GALAN A R, et al. Characterization and degradation behvaior of poly(butylene adipate-co-terephthaiate)s[J]. Polymer Chemistry, 2002, 40(23):4141-4157.
[8]	SAADI Z, CESAR G, BEWA H, et al. Fungal degradation of poly(butylene adipate-co-terephthalate) in soil and in compost[J]. Journal of Polymers and Environment, 2013, 21(4):893-901.
[9]	周承伟, 张玉, 吴智华. 填充复合材料PBAT的降解性能研究[J]. 塑料科技, 2013, 4(19):63-66. ZHOU C W, ZHANG Y, WU Z H. Study on degradation properties of filled PBAT composite[J]. Plastics Technology, 2013, 4(19):63-66.
[10]	JIANG L, WOLCOTT M P, ZHANG J. Study of biodegradable polylactide/poly(butylene adipate-co-terephthalate) blends[J]. Biomacromolecules, 2006, 7(1):199-207.
[11]	JIANG L, LIU B, ZHANG J. Properties of poly(lactic acid)/poly(butylene adipate-co-terephthalate)/nanoparticle ternary composites[J]. Ind. Eng. Chem. Res., 2009, 48(16):7594-7602.
[12]	QUERO E, MÜLLER A J, SIGNORI F, et al. Isothermal cold-crystallization of PLA/PBAT blends with and without the addition of acetyl tributyl citrate[J]. Macromolecular Chemistry and Physics, 2012, 213(1):36-48.
[13]	王垒, 靳玉娟, 孟庆阳, 等. 聚乳酸与聚对苯二甲酸/己二酸/丁二酯共混物增容体系的制备及表征[J]. 高分子材料科学与工程, 2014, 30(1):108-112. WANG L, JIN Y J, MENG Q Y, et al. Preparation and characterization of polylactic acid and polyethylene terephthalate/adipic acid/polybutylene terephthalate blend capacity system[J]. Polymeric Materials Science and Engineering, 2014, 30(1):108-112.
[14]	顾书英, 詹辉, 任杰. 聚乳酸/PBAT共混物的制备及其性能研究[J]. 中国塑料, 2006,20(10):39-42. GU S Y, ZHAN H, REN J. Preparation and properties of poly(lactic acid)/PBAT blend[J]. China Plastics, 2006, 20(10):39-42.
[15]	邹俊, 李芷, 张竞, 等. 生物可降解聚(对苯二甲酸丁二酯/己二酸丁二酯)共聚酯的合成与表征[J]. 江苏科技大学学报(自然科学版), 2013, 27(3):289-294. ZOU J, LI Z, ZHANG J, et al. Synthesis and characterization of the biodegradable poly(butylene adipate-co-butylene terephthalate) copolyesters[J]. Journal of Jiangsu University of Science and Technology(Natural Science Edition), 2013, 27(3):289-294.
[16]	GAN Z, KUWABARA K, YAMAMOTO M, et al. Solid-state structures and thermal properties of aliphatic-aromatic poly(butylene adipate-co-terephthalate) copolyesters[J]. Polymer Degradation & Stability, 2004, 83(3):289-300.
[17]	GAN Z, ABE H, DOI Y. Temperature-induced polymorphic crystals of poly(butylene adipate)[J]. Macromol. Chem. Phys., 2002, 203(16):2369-2374.
[18]	GAN Z H, KUWABARA K, ABE H, et al. The role of polymorphic crystal structure and morphology in enzymatic degradation of melt-crystallized poly(butylene adipate) films[J].Polymer Degradation and Stability, 2005, 87(1):191-199.
[19]	YASUNIWA M, TSUBAKIHARA S, OHOSHITA K, et al. X-Ray studies on the double melting behavior of poly(butylene terephthalate)[J]. J. Polym. Sci. Part B:Polym. Phys., 2001, 39(17):2005-2015.
[20]	ZHAO C, HE X, ZOU G, et al. Biodegradable Poly(butylene succinate-co-butylene dimerized fatty acid)s:synthesis, crystallization, mechanical properties, and rheology[J]. Polymer Science, Series B, 2016, 58(2):183-193.

AA/PTA单体比例对PBAT共聚酯性能的影响

Effect of monomer ratio of AA to PTA on properties of PBAT copolyesters

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王琪, 张斌, 张晓昕, 武虎建, 战海涛, 王涛. 氯铝酸-三乙胺离子液体/P₂O₅催化合成伊索克酸和2-乙基蒽醌[J]. 化工学报, 2023, 74(S1): 245-249.
[2]	杨天阳, 邹慧明, 周晖, 王春磊, 田长青. -30℃电动汽车补气式CO₂热泵制热性能实验研究[J]. 化工学报, 2023, 74(S1): 272-279.
[3]	徐文杰, 贾献峰, 王际童, 乔文明, 凌立成, 王任平, 余子舰, 张寅旭. 有机硅/酚醛杂化气凝胶的制备和性能研究[J]. 化工学报, 2023, 74(8): 3572-3583.
[4]	杨菲菲, 赵世熙, 周维, 倪中海. Sn掺杂的In₂O₃催化CO₂选择性加氢制甲醇[J]. 化工学报, 2023, 74(8): 3366-3374.
[5]	涂玉明, 邵高燕, 陈健杰, 刘凤, 田世超, 周智勇, 任钟旗. 钙基催化剂的设计合成及应用研究进展[J]. 化工学报, 2023, 74(7): 2717-2734.
[6]	葛加丽, 管图祥, 邱新民, 吴健, 沈丽明, 暴宁钟. 垂直多孔碳包覆的FeF₃正极的构筑及储锂性能研究[J]. 化工学报, 2023, 74(7): 3058-3067.
[7]	刘杰, 吴立盛, 李锦锦, 罗正鸿, 周寅宁. 含乙烯基胺酯键聚醚类可逆交联聚合物的制备及性能研究[J]. 化工学报, 2023, 74(7): 3051-3057.
[8]	李彬, 徐正虎, 姜爽, 张天永. 双氧水催化氧化法清洁高效合成促进剂CBS[J]. 化工学报, 2023, 74(7): 2919-2925.
[9]	张谭, 刘光, 李晋平, 孙予罕. Ru基氮还原电催化剂性能调控策略[J]. 化工学报, 2023, 74(6): 2264-2280.
[10]	杨琴, 秦传鉴, 李明梓, 杨文晶, 赵卫杰, 刘虎. 用于柔性传感的双形状记忆MXene基水凝胶的制备及性能研究[J]. 化工学报, 2023, 74(6): 2699-2707.
[11]	葛泽峰, 吴雨青, 曾名迅, 查振婷, 马宇娜, 侯增辉, 张会岩. 灰化学成分对生物质气化特性的影响规律[J]. 化工学报, 2023, 74(5): 2136-2146.
[12]	刘海芹, 李博文, 凌喆, 刘亮, 俞娟, 范一民, 勇强. 羟基-炔点击化学改性半乳甘露聚糖薄膜的制备及性能研究[J]. 化工学报, 2023, 74(3): 1370-1378.
[13]	王帅, 杨富凯, 徐新宇. 阻燃型全生物基多元醇聚氨酯泡沫的制备及性能研究[J]. 化工学报, 2023, 74(3): 1399-1408.
[14]	王锋, 陈钰, 裴鸿艳, 刘东东, 张静, 张立新. 1，2，4-𫫇二唑类衍生物的设计、合成及抗菌活性[J]. 化工学报, 2023, 74(3): 1390-1398.
[15]	刘润竹, 储甜甜, 张孝阿, 王成忠, 张军营. α，ω-端羟基亚苯基氟硅聚合物的合成及性能[J]. 化工学报, 2023, 74(3): 1360-1369.