CIESC Journal ›› 2019, Vol. 70 ›› Issue (9): 3473-3482.DOI: 10.11949/0438-1157.20190254

• Biochemical engineering and technology • Previous Articles     Next Articles

Synthesis of polymer grafted lipase and its effect on enzyme activity

Ziyao JIANG1(),Zonghao LIU1,Shu BAI1,Qinghong SHI1,2()   

  1. 1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, China
    2. Key Laboratory of Systems Bioengineering of Ministry of Education, Tianjin 300350, China
  • Received:2019-03-19 Revised:2019-05-07 Online:2019-09-05 Published:2019-09-05
  • Contact: Qinghong SHI

聚合物接枝脂肪酶的合成及其对酶活的影响

姜紫耀1(),刘宗浩1,白姝1,史清洪1,2()   

  1. 1. 天津大学化工学院,天津 300350
    2. 系统生物工程教育部重点实验室,天津 300350
  • 通讯作者: 史清洪
  • 作者简介:姜紫耀(1994—),女,硕士研究生,jiangziyao@tju.edu.cn
  • 基金资助:
    国家自然科学基金项目(21476166);基金委创新研究群体科学基金项目(21621004)

Abstract:

In this work, four polymer-grafted Candida rugosa lipase (CRL) were synthesized via atom transfer radical polymerization by grafting hydroxyethyl methacrylate (HEMA), glycidyl methacrylate (GMA), propyl methacrylate (nPMA) and butyl methacrylate (BMA) onto CRL surface using N-(bromoisobutyryloxy) succinimide as the initiator. The results of CD and fluorescence emission spectra showed that the helical and sheet contents of CRL increased with polymer grafting, and exhibited a positive relation with the length of alkyl group in the monomer. Furthermore, a blue shift was also observed in fluorescence emission spectra of polymer-grafted CRL, meaning that polymer-grafted CRL had a more compact structure than wide-type CRL. Activity measurement of polymer-grafted CRL further showed that polymer grafting led to a significant increase of enzymatic activity of CRL in the order of CRL, HEMA-g-CRL = GMA-g-CRL, nPMA-g-CRL and BMA-g-CRL. With an increase of the length of alkyl group in the monomer, moreover, Michaelis parameter of CRL decreased from 0.17 mmol·L-1 to 0.09 mmol·L-1 whereas turnover number increased from 67 to 182 s-1. Therefore, catalytic efficiency of polymer-grafted CRL enhanced greatly and the catalytic efficiency BMA-g-CRL was 3.28 times as high as that of wide-type CRL. It indicated that polymer grafting improved the movement of lid structure, leading to the exposure of the active site in CRL and enhancing the substrate transformation. Stability tests show that polymer grafting enhances the thermal stability of the CRL and broadens its pH range. The research proposed a novel methodology to regulate the CRL activity by polymer grafting, and exhibited the influence of alkyl groups of the monomers to CRL activity. The result in this research provided a benefit guidance for rational screening of monomer molecules to improve the performance of lipase in industrial biotransformation.

Key words: biocatalysis, Candida rugosa lipase, ATRP, polymers, hydrophobility, lipase activity, protein stability

摘要:

利用原子转移自由基聚合方法将含C2~C4烷基链的单体化合物分别接枝到皱褶假丝酵母脂肪酶(CRL)表面合成了HEMA-g-CRL、GMA-g-CRL、nPMA-g-CRL和BMA-g-CRL四种聚合物接枝CRL。CD和荧光光谱学分析显示,聚合物接枝导致HEMA-g-CRL、nPMA-g-CRL和BMA-g-CRL分子的α-螺旋和β-折叠含量增加。与此同时,聚合物接枝CRL分子荧光发射光谱也发生了蓝移,意味着其具有更加紧密的分子构象。酶活测定结果进一步显示,聚合物接枝增强CRL酶活227%~278%。随着单体化合物烷基链长增加,聚合物接枝CRL的K m值由0.17 mmol·L-1降至0.09 mmol·L-1。与此同时,聚合物接枝CRL的k cat值则提高至106~182 s-1。BMA-g-CRL的催化效率达到了野生型CRL的3.28倍。这反映出聚合物接枝助力了CRL“盖子”结构开启和CRL活性中心暴露,促进底物的转化。稳定性测试表明,聚合物接枝提升了CRL的热稳定性并拓宽了其pH操作范围。

关键词: 生物催化, 皱褶假丝酵母脂肪酶, 原子转移自由基聚合, 聚合物, 疏水性, 脂肪酶活, 稳定性

CLC Number: