CIESC Journal ›› 2022, Vol. 73 ›› Issue (3): 1102-1110.DOI: 10.11949/0438-1157.20211656

• Fluid dynamics and transport phenomena • Previous Articles     Next Articles

Analytical model of bubble point pressure for metal wire screens and experimental validation

Ye WANG1(),Wanyu ZHANG1,Bin WANG2,Rui ZHUAN2,Feng REN2,Aifeng CAI1,Guang YANG1(),Jingyi WU1   

  1. 1.Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240, China
    2.Aerospace System Engineering Shanghai, Shanghai 201109, China
  • Received:2021-11-19 Revised:2022-01-06 Online:2022-03-14 Published:2022-03-15
  • Contact: Guang YANG

多孔网幕泡破压力预测模型的建立及实验验证

王晔1(),张婉雨1,汪彬2,耑锐2,任枫2,蔡爱峰1,杨光1(),吴静怡1   

  1. 1.上海交通大学机械与动力工程学院,上海 200240
    2.上海宇航系统工程研究所,上海 201109
  • 通讯作者: 杨光
  • 作者简介:王晔(1995—),女,博士研究生,wangyeee@sjtu.edu.cn
  • 基金资助:
    国家自然科学基金重点项目(51936006);中国航天科技集团第八研究院产学研合作基金项目(USCAST2020-15);上海市科技计划项目(20YF1447900)

Abstract:

The metal porous mesh screen has many advantages such as large specific surface area and good physical stability, and is widely used in the fields of propellant on-orbit gas-liquid separation and phase change heat transfer. Bubble point pressure is the most important parameter governing the separation performance, which is determined by the effective bubble point diameter of the porous material. The effective pore diameter can be estimated through experimental measurements, whereas experimental methods require measurements of several working fluids for each specification of porous mesh. Owing to the experimental limitations, scanning electron microscopy (SEM) analysis is proposed to estimate the pore diameter from SEM images. However, it is proven to be unreliable since the 2D images cannot account for the complex pore structures of the wire mesh. The prediction of bubble point pressure remains a challenge. Herein, this paper presents an analytical model of bubble point pressure for metal wire mesh considering the effect of pore structures. Variation of the effective flow area during the bubble breakthrough is detailed analyzed based on the 3D model of the porous wire mesh. The effective pore diameter is quantified by analogy to a capillary tube, which is expressed as a function of mesh parameters, including the intervals, diameters, relative angle and turn angle of the mesh wires. Each parameter is determined solely from the pore-scale morphology, and hence, the accurate expression for each mesh is derived without introducing any fitting constants. In addition, bubble point pressure measurements are conducted. The predicted effective pore diameters from the proposed model are corroborated by 7 specifications of porous mesh from existing literature and current experiments with a mean absolute relative error of 8%. Moreover, more than 250 data points of bubble point pressure are collected from open literature, focusing on both room-temperature and cryogenic fluids. The applicability of the present analytical model on different mesh specifications and various fluids are validated with the relative error smaller than 10%. The results further verify the validity of the bubble point model based on Young-Laplace equation, which considered the porous media to be analogous to a bundle of capillary tubes. This work deepens the understanding on the periodical porous structures of the wire mesh and proposed an analytical model to predict the bubble point pressure, which breaks free from the experimental limitations.

Key words: porous medium, bubble point pressure, effective pore diameter, separation, pore-scale

摘要:

金属多孔网幕具有比表面积大、物理稳定性好等诸多优点,广泛应用于推进剂在轨气液分离及相变传热等领域。泡破压力是衡量其相分离性能的关键参数,可根据多孔介质的有效泡破孔径确定。然而多孔网幕的孔隙结构极其复杂,泡破孔径计算仍未有通用且高效的方法。建立了一种基于三维孔隙结构的多孔网幕泡破压力的通用型解析模型。该模型仅依赖于多孔网幕的几何结构参数,无须实验即可有效预测多孔网幕的泡破压力。模型预测结果与本文实验及文献实验中不同网幕规格、低温及常温工质数据吻合良好,平均误差仅为8%,表明该解析模型具有普适性和准确性,可为基于多孔网幕的液体获取装置的设计与性能预测提供参考。

关键词: 多孔介质, 泡破压力, 有效孔径, 分离, 孔隙尺度

CLC Number: