CIESC Journal ›› 2016, Vol. 67 ›› Issue (11): 4906-4911.DOI: 10.11949/j.issn.0438-1157.20160484

Previous Articles    

Raman enhancement of biosynthesized Au-Ag bimetallic nanomaterials

JIANG Xinde, WANG Zhenxi, JIANG Guixian, PENG Yong   

  1. College of Science, Nanchang Institute of Technology, Nanchang 330099, Jiangxi, China
  • Received:2016-04-14 Revised:2016-06-17 Online:2016-11-05 Published:2016-11-05
  • Supported by:

    supported by the National Natural Science Foundation of China (51303074, 21506088) and the Natural Science Foundation of Jiangxi Province (20161BBF60061).

植物还原法制备Au-Ag合金纳米材料及其拉曼应用

江新德, 王振希, 江桂仙, 彭勇   

  1. 南昌工程学院理学院, 江西 南昌 330099
  • 通讯作者: 江新德(1982-),男,博士,讲师,jxd@nit.edu.cn
  • 基金资助:

    国家自然科学基金项目(51303074,21506088);江西省自然科学基金项目(20161BBF60061)。

Abstract:

“Green” synthesis of bimetallic nanomaterials has drawn considerable attention in the field of nanotechnology. Au-Ag bimetallic nanomaterials were synthesized using extract of Artocarpus heterophyllus Lam leaves as reducing and capping agent. As a result of greater influence of temperature on nucleation and growth of Ag nanoparticles than the Au nanoparticles, Au-Ag alloys with a ratio of Au to Ag in 3:1 were obtained at 333 K, while alloys with a lower ratio of Au to Ag (1:1) were obtained at 363 K. This influence was illustrated by determining the nucleation and growth of Au and Ag nanoparticles using UV-Vis spectrophotometry method respectively, and it was also confirmed by FTIR analysis that only partial biomolecules were oxidized in the synthesis of Au-Ag (3:1) alloys. Au-Ag bimetallic nanoparticle with a ratio of Au to Ag in 1:1 generated a significant Raman enhancement in probing of Rhodamine 6G.

Key words: nanomaterials, synthesis, kinetic modeling, alloy, bio-reduction

摘要:

以菠萝蜜叶提取液作为保护剂和还原剂制备金银合金纳米颗粒,在333 K和363 K时制备的合金纳米颗粒的金与银的组成比分别约为3:1和1:1。采用紫外-可见分光光度法分别测定金与银纳米颗粒的成核生长动力学,温度对银的成核生长影响更加明显,在363 K时两者成核生长速度相差不到2倍,容易形成比例相当的合金纳米颗粒。对提取液中植物分子反应前后红外分析,得出333 K时有部分银离子没有完全还原而使得合金中相应含量比例较低。而组成约为1:1的合金纳米颗粒在罗丹明的检测中显示出较强的拉曼增强效应。

关键词: 纳米材料, 合成, 动力学模型, 合金, 植物还原法

CLC Number: