[1] |
Bao Ran (鲍然). Experimental investigation of heat transfer enhancement in an inclined axial miniature grooved heat pipe using nanofluid [D]. Shanghai:Shanghai Jiao Tong University, 2010
|
[2] |
Dharaiya V V, Kandlikar S G. A numerical study on the effects of 2D structured sinusoidal elements on fluid flow and heat transfer at microscale [J]. Int. J. Heat Mass Transfer, 2013, 57: 190-201
|
[3] |
Guzman A M, Cardenas M J, Urzua F A, et al. Heat transfer enhancement by flow bifurcations in asymmetric wavy wall channels [J]. Int. J. Heat Mass Transfer, 2009, 5: 3778-3789
|
[4] |
Haller D, Woias P, Kockmann N. Simulation and experimental investigation of pressure loss and heat transfer in microchannel networks containing bends and T-junctions [J]. Int. J. Heat Mass Transfer, 2009, 52: 2678-2689
|
[5] |
Hung T C, Yan W M, Li W P. Analysis of heat transfer characteristics of double-layered microchannel heat sink [J]. Int. J. Heat Mass Transfer, 2012, 55: 3090-3099
|
[6] |
Bejan A. Entropy Generation Minimization [M]. New York: Wiley-Interscience Publication, 1996: 77-111
|
[7] |
Bejan A. Entropy Generation through Heat and Fluid Flow [M]. New York: Wiley-Interscience Publication, 1982: 89-190
|
[8] |
Guo J F, Xu M T, Tao Y J, et al. The effect of temperature-dependent viscosity on entropy generation in curved square microchannel [J]. Chem. Eng. Process., 2012, 52: 85-91
|
[9] |
Kosar A. Exergo-economic analysis of micro pin fin heat sinks [J]. Int. J. Exergy, 2011, 35: 1004-1013
|
[10] |
Shuja S Z. Optimal fin geometry based on exergoeconomic analysis for a pin-fin array with application to electronics cooling [J]. Exergy, 2002, 2 (4): 248-258
|
[11] |
Wu Shuangying (吴双应), Li Yourong (李友荣). Thermodynamic analysis of forced convective heat transfer through a duct including thermal entrance region [J]. Power System Engineering (电站系统工程), 1997, 13 (1): 8-12
|
[12] |
Zhao Yuzhen (赵玉珍),Hua Fang (华放). Optimizing convective heat transfer process with the second law of thermodynamic [J]. Journal of Harbin Institute of Technology (哈尔滨工业大学学报), 1992, 24: 34-39
|
[13] |
Li Yourong (李友荣),Jin Mingcong (靳明聪),Tang Jingwen (唐经文). Thermodynamic analysis and performance evaluation of convective heat transfer through ducts [J]. Journal of Chongqing University (重庆大学学报), 1992, 15 (3): 68-72
|
[14] |
Chen Yan (陈燕). The research on exergy transfer of forced convective heat transfer [D]. Chongqing:Chongqing University, 2006
|
[15] |
Liu W, Jia H, Liu Z C, et al. The approach of minimum heat consumption and its applications in convective heat transfer optimization [J]. Int. J. Heat Mass Transfer, 2013, 57: 389-396
|
[16] |
Sharma C S, Tiwari M K, Michel B, et al. Thermofluidics and energectics of a manifold microchannel heat sink for electronics with recovered hot water as working fluid [J]. Int. J. Heat Mass Transfer, 2013, 58: 135-151
|
[17] |
Xia G D, Zhai Y L, Cui Z Z. Numerical investigation of flow and heat transfer in a microchannel with fan-shaped reentrant cavities and internal ribs [J]. Appl. Therm. Eng., 2013, 58: 52-60
|
[18] |
Xia G D, Chai L, Zhou M Z, et al. Effects of structural parameters on fluid flow and heat transfer in a microchannel with aligned fan-shaped reentrant cavities [J]. Int. J. Therm. Sci., 2011, 50: 411-419
|
[19] |
Xia G D, Chai L, Wang H Y. Optimum thermal design of microchannel heat sink with triangular reentrant cavities [J]. Appl. Therm. Eng., 2011, 31: 1208-1219
|
[20] |
Zhai Y L, Xia G D, Liu X F, et al. Heat transfer in the microchannels with fan-shaped reentrant cavities and different ribs based on field synergy principle and entropy generation analysis [J]. Int. J. Heat Mass Transfer, 2014, 68: 224-233
|
[21] |
Hung T C, Huang Y X, Yan W M. Thermal performance analysis of porous-microchannel heat sinks with different configuration designs [J]. Int. J. Heat Mass Transfer, 2013, 66: 235-243
|