[1] Linnhoff, B., Dunford, H., Smith, R., "Heat integration of distillation columns into overall proesses", Chem. Eng.Sci., 38 (8), 1175-1188 (1983). [2] Tedder, D. W., Rudd, D. F., "Parametric studies in industrial distillation", AIChE J., 24 (2), 303-315 (1978). [3] Mah, R. S. H., Nicholas, J. J., Wodnik, R. B., "Distillation with secondary reflux and vaporization: A comparative evaluation", AIChE J., 23 (5), 651-658 (1977). [4] Batista, E, Meirelles, A., "Simulation and thermal integration SRV in extractive distillation column", J. Chem. Eng.Japan, 30 (1), 45-51 (1997). [5] Huang, K. J., Qian, J. X., Zhan, D. Z., Nakaiwa, M.,Takamatsu, T., "Steady-state operation analysis of an ideal heat integrated distillation column", Chinese J. Chem.Eng., 5 (4), 325-336 (1997). [6] Nakaiwa, M., Huang, K., Owa, M., Akiya, T., Nakane,T., Sato, M., Takamatsu, T., "Energy savings in heatintegrated distillation", Energy, 22 (6), 621-625 (1997). [7] Liu, X. G., Ma, L. H., Qian, J. X., "Thermodynamic analysis, simulation and optimization of ideal internal thermally coupled distillation columns", Chinese J. Chem. Eng., 8(1), 57-63 (2000). [8] Liu, X. G., "Modeling and optimization of internal thermally coupled distillation columns", Ph. D. Thesis, Zhejiang University, Hangzhou (1999). [9] Piela, P. C., Epperly, T. G., Westerberg, K. M., Westerberg, A. W., "ASCEND: an object -oriented environment for modeling and analysis: the modeling language", Comp.Chem. Eng., 15 (1), 53-72 (1991). [10] Schmid, C., Biegler, L. T., "Quadratic programming methods for reduced hessian SQP", Comp. Chem. Eng.,18, 817-832 (1994). [11] Reid, R. C., Prausnitz, J. M., Sherwood, T. K., "The properties of gases and liquids", McGraw-Hill Co., New York (1977). [12] Humphrey, J. L., Seibert, A. F., "Separation technologies:an opportunity for energy savings", Chem. Eng. Progr.,88 (3), 32-41 (1992). [13] Ferre, J. A., Castells, F., Flores, J., "Optimization of a distillation column with a direct vapor recompression heat pump", Ind. Eng. Chem. Process Des. Dev., 24 (1),128-132 (1985). |