[1] Fan, Y.P., Ye, S., Chao, Z.X., Lu, C.X., Sun, G.G., Shi,M.X., "Gas-solid two phase flow in FCC riser", AIChE J.,48 (9), 1869-1887 (2002). [2] Fan, Y.P., Ye, S., Lu, C.X., Shi, M.X., "The gas-solid two phase in the feed injection zone of FCC riser reactor (Experimental research)", J. Chem. Ind. Eng. (China), 53(10), 1004-1008 (2002). (in Chinese) [3] Gao, J.S., "Numerical simulation on the flow, heat-transfer and reaction in the catalytic cracking riser reactors", PhD Thesis, University of Petroleum Beijing (1997). (in Chinese) [4] Mauleon, "The method for the injection of catalyst in a fluid catalytic cracking process, especially for heavy feedstock",US Pat., 4832825 (1989). [5] Lomas, David, A., Haun, Edward, C., "FCC riser with transverse feed injection", US Pat., 5139748 (1992). [6] Zhao, W.F., "Progress in catalytic cracking reaction technology’’, Petroleum Processing and Petrochemicals, 27 (2),12-16 (1996). (in Chinese) [7] Zheng, M.J., Hou, S.D., Zhong, X.X., Li, S.N., "Determining the particle velocity distribution in FCC riser with different structures", Petroleum Processing and Petrochemicals, 31 (2), 45-49 (2000). (in Chinese) [8] Zhong, X.X., Zheng, M.J., Hou, S.D., Li, S.N., "Study on flow hydrodynamics of anti- down-slipping riser", Petroleum Processing and Petrochemicals, 31 (7), 45-49 (2000). (in Chinese) [9] Fan, Y.P., "The development of feedstock injection device of FCC riser", Postdoctoral Reports, University of Petroleum,Beijing (2003). [10] Fan, Y.P., Lu, C.X., Sun, G.G., Shi, M.X., "The feature of radial density distribution of particles in riser pre-lift zone",Petroleum Processing and Petrochemicals, 30 (9), 56- 59(1999). (in Chinese) |