CIESC Journal ›› 2013, Vol. 64 ›› Issue (4): 1231-1235.DOI: 10.3969/j.issn.0438-1157.2013.04.015

Previous Articles     Next Articles

Pool boiling heat transfer of water in porous copper foam

CHENG Yun1, LI Juxiang2, MO Guangdong3   

  1. 1. CCIE Petrochemical Engineering Design Institute, Nanjing 210046, Jiangsu, China;
    2. College of Energy, Nanjing University of Technology, Nanjing 210009, Jiangsu, China;
    3. BASF-YPC Company Ltd., Nanjing 210048, Jiangsu, China
  • Received:2012-06-28 Revised:2012-09-25 Online:2013-04-05 Published:2013-04-05

水在开孔泡沫铜中的池沸腾传热特性

程云1, 李菊香2, 莫光东3   

  1. 1. 中建安装石化工程设计院,江苏 南京210046;
    2. 南京工业大学能源学院,江苏 南京 210009;
    3. 扬子石化-巴斯夫有限责任公司,江苏 南京210048
  • 通讯作者: 李菊香
  • 作者简介:程云(1987—),女,硕士研究生。
  • 基金资助:

    江苏省科技计划基金项目(BK2004214)。

Abstract: The pool boiling heat transfer performance of water in porous copper foam was investigated experimentally at room temperature and atmospheric pressure.The growth characteristics of bubble in copper foam with open cells were obtained by visual observation.The results showed that the bubble escape diameters and bubble escape frequency increased with the increase of heat flux,and the enhancement effect of copper foam for pool boiling was obtained by comparing with plain tube.A correlation for water pool boiling heat transfer coefficient in copper foam was obtained,providing a basis to further study.

Key words: metal foams, pool boiling, heat transfer performance

摘要: 对常温、大气压下水在开孔泡沫铜中池沸腾的传热特性进行了试验研究,观察了开孔泡沫铜中汽泡的生长特性及其变化规律,并与水在光管加热面的池沸腾特性进行了对比。试验结果表明:水在泡沫铜中池沸腾时,汽泡脱离直径和汽泡脱离频率随热通量的增加而不断增大,泡沫铜对水的池沸腾传热具有很好的强化效果。根据试验结果,得到了水在开孔泡沫铜中池沸腾传热的传热系数拟合关联式,为进一步的研究提供了依据。

关键词: 泡沫金属, 池沸腾, 传热性能

CLC Number: