[1] |
Wang Y, Chen K S, Mishler J, et al.A review of polymer electrolyte membrane fuel cells:technology, applications, and needs on fundamental research[J].Applied Energy, 2011, 88 (4):981-1007
|
[2] |
Springer T E, Zawodzinski T A, Gottesfeld S.Polymer electrolyte fuel cell model[J].J.Electrochem.Soc., 1991, 138:2334-2342
|
[3] |
Karnik A Y, Stefanopoulou A G, Sun J.Water equilibria management using a two-volume model of a polymer electrolyte fuel cell[J].J.Power Sources, 2007, 164 (2):590-605
|
[4] |
Bao C, Ouyang M, Yi B.Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system (Ⅱ):Linear and adaptive nonlinear control[J].International Journal of Hydrogen Energy, 2006, 31 (13):1897-1913
|
[5] |
Amphlett J C, Baumert R M, Mann R F, et al. Performance modeling of the ballard mark Ⅳ solid polymer electrolyte fuel cell (Ⅱ):Empirical model development[J].J.Electrochem.Soc., 1995, 142 (1):9-15
|
[6] |
Pukrushpan J T, Stefanopoulou A, Peng H.Control of Fuel Cell Power Systems:Principles, Modeling, Analysis, and Feedback Design[M].London:Springer-Verlag, 2004
|
[7] |
Bordons C, Arce A, DelReal A J.Constrained predictive control strategies for PEM fuel cells//American Control Conference[C].Minneapolis, Minnesota, USA, 2006
|
[8] |
Gruber J K, Bordons C, Oliva A.Nonlinear MPC for the airflow in a PEM fuel cell using a Volterra series model[J].Control Engineering Practice, 2012, 20 (2):205-217
|
[9] |
Chen Q H, Quan S H, Xie C J.Nolinear predictive control for oxygen supply of a fuel cell system//Proceeding of International Joint Conference on Neural Networks[C].Atlanta, Georgia, USA, 2009:518-521
|
[10] |
Garcia-Gabin W, Dorado F, Bordons C.Real-time implementation of a sliding mode controller for air supply on a PEM fuel cell[J].J.Process Control, 2010, 20 (3):325-336
|
[11] |
Arce A, Ramirez D R, DelReal A J, Bordons C. Constrained explicit predictive control strategies for PEM fuel cell systems//Proceeding of the 46th IEEE Conference on Decision and Control[C].New Orleans, LA, USA, 2001
|
[12] |
Shirasaki Y, Tsuneki T, Ota Y, Yasuda I, et al. Development of membrane reformer system for highly efficient hydrogen production from natural gas[J].International Journal of Hydrogen Energy, 2009, 34 (10):4482-4487
|
[13] |
Pukrushpan J T, Stefanopoulou A, et al.Control of natural gas catalytic partial oxidation for hydrogen generation in fuel cell applications[J].IEEE Trans.Control Syst.Technol., 2005, 13 (1):1-14
|
[14] |
Talj R J, Hissel D, Ortega R, et al.Experimental validation of a PEM fuel cell reduced-order model and a moto-compressor higher order sliding-mode control[J].Industrial Electronics, 2010, 57 (6):1906-1913
|
[15] |
Talj R J, Ortega R, Hilairet M.A controller tuning methodology for the air supply system of a PEM fuel-cell system with guaranteed stability properties[J].International Journal of Control, 2009, 82 (9):1706-1719
|
[16] |
Vahidi A, Stefanopoulou A, Peng H.Current management in a hybrid fuel cell power system:a model-predictive control approach[J].Transactions on Control Systems Technology, 2006, 14 (6):1047-1056
|
[17] |
Zou Tao (邹涛), Ding Baocang (丁宝苍), Zhang Duan (张端).MPC:An Introduction To Industrial Applications (模型预测控制工程应用导论)[M].Beijing:Chemical Industry Press, 2010
|
[18] |
Xi Yugeng (席裕庚).Predictive Control (预测控制)[M].Beijing:National Defence Industry Press, 1993
|
[19] |
Vahidi A, Stefanopoulou A, Peng H.Current management in a hybrid fuel cell power system:a model-predictive control approach[J].IEEE Trans.Control Syst.Technol., 2006, 14 (6):1047-1057
|
[20] |
Casavola A, Famularo D, Franze G.A feedback min-max MPC algorithm for LPV systems subject to bounded rates of change of parameters[J].IEEE Trans.Automatic Control, 2002, 47 (7):1147-1153
|