| [1] |
POHL A. A review of wireless SAW sensors[J].IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2000, 47(2):317-32.
|
| [2] |
DELLA L F, ZAMBROZI J P, FRAZATTO F, et al. Design, fabrication and characterization of SAW pressure sensors for offshore oil and gas exploration[J]. Sensors and Actuators A, 2015, 222:322-328.
|
| [3] |
LEE S W,RHIM J W,PARK S W,et al. A novel micro rate sensor using a Surface-Acoustic-Wave (SAW) delay-line oscillator[C]//IEEE Sensors 2007. Atlanta, US, 2007:1156-1159.
|
| [4] |
JHA S S,YADAVA R D S. A new surface acoustic wave (SAW) delay line sensor[C]//AIP Conference Proceedings. 2013, 1536:1254-1255.
|
| [5] |
MORGAN D P. History of SAW devices[C]//IEEE International Frequency Control Symposium. 1998:439-460.
|
| [6] |
TRAN A T, PANDRAUD G, MOH T S Y, et al. Encapsulated aluminum nitride SAW devices for liquid sensing applications[C]//11th IEEE Sensors Conference. Taipei, Taiwan, 2012:1-4.
|
| [7] |
WANG S Q,HARADA J,UDA S. A Wireless surface acoustic wave temperature sensor using Langasite as substrate material for high-temperature applications[J].Japanese Journal of Applied Physics, 2003, 17(4):408-423.
|
| [8] |
RAMAKRISHNAN N,NAMDEO A K, NEMADE H B,et al. Simplified model for FEM simulation of SAW delay line sensor[J]. Procedia Engineering, 2012, 41:1022-1027.
|
| [9] |
WU T T, CHEN Y Y, CHOU T H. A high sensitivity nanomaterial based SAW humidity sensor[J]. Journal of Physics D. Applied Physics, 2008, 41(8):1577-1582.
|
| [10] |
SHIOKAWA S, KONDOH J. Surface acoustic wave sensors[J]. Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes & Review Papers, 2004, 43(5B):2799-2802.
|
| [11] |
VELLEKOOP M J. Acoustic wave sensors and their tech-nology[J]. Ultrasonics, 1998, 36(1/2/3/4/5):7-14.
|
| [12] |
TOKUDA O,HIROTA K. Two-dimensional coupling-of-modes analysis in surface acoustic wave device performed by COMSOL multiphysics[J].Japanese Journal of Applied Physics, 2011, 50(7):913-919.
|
| [13] |
FALL D,DUQUENNOY M,OUAFTOUH M,et al. Modelling based on spatial impulse response model for optimization of inter digital transducers (SAW Sensors) for non destructive testing[J]. Physics Procedia, 2015, 70:927-931.
|
| [14] |
KSHERTRIMAYUM R, YADAVA R D S, TANDON R P. Modeling electrical response of polymer-coated SAW resonators by equivalent circuit representation[J]. Ultrasonics, 2011, 51(5):547-553.
|
| [15] |
POWELL D A, KALANTAR Z K, WLODARSKI W. Comprehensive analysis of SAW sensor performance in liquid media by Green's function method[C]//IEEE Symposium on Ultrasonics. 2003, 1:146-149.
|
| [16] |
CAICEDO J C, PEREZ J A, CAICEDO H H, et al. Determination of physical response in (Mo/AlN) SAW devices[J]. Surf. Rev. Lett., 2013, 20(2):108-114.
|
| [17] |
HONG H S, PHAN D, CHUNG G S. High-sensitivity humidity sensors with ZnO nanorods based two-port surface acoustic wave delay line[J]. Sensors and Actuators B, 2012, 171/172:1283-1287.
|
| [18] |
LEE T W, JUNG S J, CHUNG W Y. Wireless surface acoustic wave temperature monitoring system with RF burst signal[J]. Sensor Letters, 2014, 12:999-1002.
|
| [19] |
胡爱民. 微声电子器件[M]. 北京:国防工业出版社,2008:100-102. HU A M. Micro Acoustic Electronic Device[M]. Beijing:National Defense Industry Press, 2008:100-102.
|
| [20] |
LI Y G, MA L X, DU D X. Programmed data extraction for frequency-temperature behavior of AlN based SAW sensors[C]//Proceedings of the 2015 symposium on Piezoelec-tricity, Acoustic Waves and Device Applications. Jinan, China, IEEE Conference Publications, 2015:212-215.
|
