CIESC Journal ›› 2017, Vol. 68 ›› Issue (9): 3474-3481.DOI: 10.11949/j.issn.0438-1157.20170101

Previous Articles     Next Articles

Effect of wettability on nanoporous ceramic membrane for condensate transport performance

LI Yun1, HU Haowei2,3   

  1. 1 School of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei 230601, Anhui, China;
    2 School of Environment and Energy Engineering, Anhui Jianzhu University, Hefei 230601, Anhui, China;
    3 Key Laboratory of Thermo-Fluid Science and Engineering(Xi'an Jiaotong University), Ministry of Education, Xi'an 710049, Shaanxi, China
  • Received:2017-01-22 Revised:2017-05-10 Online:2017-09-05 Published:2017-09-05
  • Contact: 10.11949/j.issn.0438-1157.20170101
  • Supported by:

    supported by the Natural Science Research of Anhui Province (KJ2015JD19,KJ2017A488),the International Science and Technology Cooperation Program of Anhui Province (1503062012) and the Foundation of Key Laboratory of Thermo-Fluid Science and Engineering (Xi'an Jiaotong University),Ministry of Education.

润湿性对纳米多孔陶瓷膜输运性能的影响

李云1, 胡浩威2,3   

  1. 1 安徽建筑大学机械与电气工程学院, 安徽 合肥 230601;
    2 安徽建筑大学环境与能源工程学院, 安徽 合肥 230601;
    3 热流科学与工程教育部重点实验室, 西安交通大学, 陕西 西安 710049
  • 通讯作者: 胡浩威
  • 基金资助:

    安徽省教育厅自然科学研究项目(KJ2015JD19,KJ2017A488);安徽省国际科技合作计划项目(1503062012);热流科学与工程教育部重点实验室(西安交通大学)开放基金。

Abstract:

To recover the residual water efficiently in the complex environment, the advanced membrane technology was employed. Based on the experiment apparatus of the semicontinuous supercritical reactions, the wettability-modified nanoporous ceramic membranes were achieved by using semicontinuous supercritical reactions. The microstructure and characterization of both hydrophilic and hydrophobic nanoporous membranes were investigated by the methods of the contact angle measurement, electron microscope scan and electron spectroscopy analysis. Based on the experimental system of vapor condensation heat transfer on a single tube, the investigation of condensate transport through the nanoporous membrane with and without wettability modificaion was carried out. The effects of typical parameters including coolant flow rate, mixture gas temperature, transmembrane pressure and water vapor volume fraction on heat and mass transfer performance are studied. To explore the mechanism of water transport in nanoscale channels with different surface wettability, the method of molecular dynamics simulation was employed. The transport of water through a single nanopore was simulated.

Key words: wettability, transport flux, modification, molecular dynamics, nanopore, energy parameter

摘要:

为了实现复杂环境中高效回收水资源,采用先进的膜技术,基于建立的半连续超临界相反应改性实验装置对纳米多孔陶瓷膜分别进行亲水和疏水表面改性,通过接触角测量、微观结构观测等方法对润湿改性前后的纳米多孔陶瓷膜进行表征。基于单管管外水蒸气冷凝传热实验系统,对润湿改性前后的纳米多孔陶瓷膜进行了冷凝液输运特性的实验研究,揭示了混合气体温度、冷却水流速、跨膜压差和水蒸气体积分数等典型运行参数对纳米多孔陶瓷膜的冷凝液输运通量的影响规律与机理。同时,采用分子动力学方法,构建了水在不同润湿性纳米孔内输运模拟体系,研究水分子在不同润湿性纳米孔内的输运规律。

关键词: 润湿性, 输运通量, 表面改性, 分子动力学, 纳米孔, 力场参数

CLC Number: