CIESC Journal ›› 2021, Vol. 72 ›› Issue (4): 2065-2075.DOI: 10.11949/0438-1157.20201227
• Catalysis, kinetics and reactors • Previous Articles Next Articles
ZHANG Mengfei1(),ZHANG Ling2,LI Xiaochuang1,ZU Yunqiu1,HUANG Ming1(),SHI Xianzhang1,LIU Chuntai1
Received:
2020-08-27
Revised:
2020-10-09
Online:
2021-04-05
Published:
2021-04-05
Contact:
HUANG Ming
张梦飞1(),张玲2,李晓闯1,祖韵秋1,黄明1(),石宪章1,刘春太1
通讯作者:
黄明
作者简介:
张梦飞(1995—),男,硕士研究生,基金资助:
CLC Number:
ZHANG Mengfei, ZHANG Ling, LI Xiaochuang, ZU Yunqiu, HUANG Ming, SHI Xianzhang, LIU Chuntai. Simulation and experimental study on non-isothermal vulcanization process of thick-walled rubber products[J]. CIESC Journal, 2021, 72(4): 2065-2075.
张梦飞, 张玲, 李晓闯, 祖韵秋, 黄明, 石宪章, 刘春太. 厚壁橡胶制品非等温硫化过程模拟与实验研究[J]. 化工学报, 2021, 72(4): 2065-2075.
t0/s | T0/K | E/(J·mol-1) | k0 | a2 | b2 | c |
---|---|---|---|---|---|---|
5.94×10-8 | 9238.76 | 2.60×105 | 2.25×1027 | 2.59×10-7 | -7.81×10-3 | 5.23 |
Table 1 The parameters of the improved model
t0/s | T0/K | E/(J·mol-1) | k0 | a2 | b2 | c |
---|---|---|---|---|---|---|
5.94×10-8 | 9238.76 | 2.60×105 | 2.25×1027 | 2.59×10-7 | -7.81×10-3 | 5.23 |
温度/℃ | 比热容/(J·kg-1·K-1) |
---|---|
40 | 1419 |
60 | 1490 |
80 | 1520 |
100 | 1501 |
120 | 1477 |
140 | 1486 |
160 | 1481 |
Table 2 Specific heat capacity of rubber at different temperatures
温度/℃ | 比热容/(J·kg-1·K-1) |
---|---|
40 | 1419 |
60 | 1490 |
80 | 1520 |
100 | 1501 |
120 | 1477 |
140 | 1486 |
160 | 1481 |
1 | Chen H L, Li T, Liang Y, et al. Experimental study of temperature distribution in rubber material during microwave heating and vulcanization process[J]. Heat and Mass Transfer, 2017, 53(3): 1051-1060. |
2 | 魏利萍. 基于硫化测温技术的轮胎硫化工艺改善和配方优化[D]. 青岛: 青岛科技大学, 2015. |
Wei L P. Tire vulcanization process improvement and formula optimization based on curing temperature-measuring technology[D]. Qingdao: Qingdao University of Science & Technology, 2015. | |
3 | 惠炳国, 王振太, 刘世东. 全钢载重子午线轮胎的硫化测温[J]. 轮胎工业, 2008, 28(1): 46-49. |
Hui B G, Wang Z T, Liu S D. Vulcanization temperature measurement of all-steel radial truck tire [J]. Tire Industry, 2008, 28(1): 46-49. | |
4 | 曾海泉, 闻邦椿. 天然橡胶超声硫化[J]. 化工学报, 2003, 54(12): 1745-1749. |
Zeng H Q, Wen B C. Ultrasonic vulcanization of natural rubber[J]. Journal of Chemical Industry and Engineering (China), 2003, 54(12): 1745-1749. | |
5 | 傅彦杰. 橡胶厚制品硫化温度与等效硫化时间的测定[J]. 橡胶工业, 1997, 44(9): 552-558. |
Fu Y J. Determination of curing temperature and EV time for thick walled rubber article[J]. China Rubber Industry, 1997, 44(9): 552-558. | |
6 | 寇利涛, 顾勤, 丁剑平, 等. 橡胶硫化反应热对硫化温度场的影响[J]. 橡胶工业, 2007, 54(10): 619-622. |
Kou L T, Gu Q, Ding J P, et al. Influence of curing reaction heat on curing temperature field of rubber[J]. China Rubber Industry, 2007, 54(10): 619-622. | |
7 | 粟本龙. 巨型子午线轮胎硫化仿真研究[D]. 哈尔滨: 哈尔滨工业大学, 2010. |
Su B L. Simulation study on giant radial tire vulcanization process[D]. Harbin: Harbin Institute of Technology, 2010. | |
8 | Yan X Q. A numerical modeling of dynamic curing process of tire by finite element[J]. Polymer Journal, 2007, 39(10): 1001-1010. |
9 | Sae-Oui P, Thepsuwan U. Prediction of cure level in thick rubber cylinder using finite element analysis[J]. ScienceAsia, 2002, 28: 385-391. |
10 | Zhang J, Wei Y S, Wang G L, et al. Special software development for tire vulcanization simulation[J]. Applied Mechanics and Materials, 2013, 404: 764-768. |
11 | 王国林, 傅乃霁, 张建, 等. 基于K-R动力学模型的子午线轮胎硫化过程仿真[J]. 吉林大学学报(工学版), 2013, 43(3): 659-664. |
Wang G L, Fu N J, Zhang J, et al. Simulation of the radial tire curing process based on K-R kinetic model[J]. Journal of Jilin University (Engineering and Technology Edition), 2013, 43(3): 659-664. | |
12 | 贾玉玺, 孙胜, 刘莉莉, 等. 模具硅橡胶材料热硫化工艺的有限元模拟[J]. 化工学报, 2003, 54(9): 1300-1304. |
Jia Y X, Sun S, Liu L L, et al. Finite element simulation of hot vulcanization process of moldable silicone rubber material[J]. Journal of Chemical Industry and Engineering (China), 2003, 54(9): 1300-1304. | |
13 | 郭飞, 张兆想, 宋炜, 等. 橡胶硫化过程数值模拟研究进展[J]. 化工学报, 2020, 71(8): 3393-3402. |
Guo F, Zhang Z X, Song W, et al. Research progress in numerical simulation of rubber vulcanization[J]. CIESC Journal, 2020, 71(8): 3393-3402. | |
14 | Coran A Y. Vulcanization(Ⅵ): A model and treatment for scorch delay kinetics[J]. Rubber Chemistry and Technology, 1964, 37(3): 689-697. |
15 | Ding R, Leonov A I. A kinetic model for sulfur accelerated vulcanization of a natural rubber compound[J]. Journal of Applied Polymer Science, 1996, 61(3): 455-463. |
16 | Ding R, Leonov A I, Coran A Y. A study of the vulcanization kinetics of an accelerated-sulfur SBR compound[J]. Rubber Chemistry and Technology, 1996, 69(1): 81-91. |
17 | Nozu S, Tsuji H, Itadani M, et al. Study of cure process of thick solid rubber[J]. Journal of Materials Processing Technology, 2008, 201(1/2/3): 720-724. |
18 | 戈明亮, 阚长华, 易玉华, 等. 橡胶硫化反应动力学研究概况[J]. 橡胶工业, 2004, 51(10): 631-635. |
Ge M L, Kan C H, Yi Y H, et al. Study on reaction kinetics of rubber vulcanization[J]. China Rubber Industry, 2004, 51(10): 631-635. | |
19 | Kamal M R. Thermoset characterization for moldability analysis[J]. Polymer Engineering & Science, 1974, 14(3): 231-239. |
20 | López-Manchado M A, Arroyo M, Herrero B, et al. Vulcanization kinetics of natural rubber-organoclay nanocomposites[J]. Journal of Applied Polymer Science, 2003, 89(1): 1-15. |
21 | Kamal M R, Sourour S. Kinetics and thermal characterization of thermoset cure[J]. Polymer Engineering & Science, 1973, 13(1): 59-64. |
22 | Ghoreishy M H R. A state-of-the-art review on the mathematical modeling and computer simulation of rubber vulcanization process[J]. Iranian Polymer Journal, 2016, 25(1): 89-109. |
23 | Barghamadi M, Ghoreishy M H R, Karrabi M, et al. Investigation on the kinetics of cure reaction of acrylonitrile-butadiene rubber (NBR)/polyvinyl chloride (PVC)/graphene nanocomposite using various models[J]. Journal of Applied Polymer Science, 2020, 137(18): 48632. |
24 | Yeoh O H. Mathematical modeling of vulcanization characteristics[J]. Rubber Chemistry and Technology, 2012, 85(3): 482-492. |
25 | Isayev A I, Deng J S. Nonisothermal vulcanization of rubber compounds[J]. Rubber Chemistry and Technology, 1988, 61(2): 340-361. |
26 | Ghoreishy M H R, Naderi G. Three-dimensional finite element modeling of rubber curing process[J]. Journal of Elastomers & Plastics, 2005, 37(1): 37-53. |
27 | Rafei M, Ghoreishy M H R, Naderi G. Development of an advanced computer simulation technique for the modeling of rubber curing process[J]. Computational Materials Science, 2009, 47(2): 539-547. |
28 | Zhang J, Tang W X. Rubber curing process simulation based on parabola model[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013, 28(1): 150-156. |
29 | Erfanian M R, Anbarsooz M, Moghiman M. A three dimensional simulation of a rubber curing process considering variable order of reaction[J]. Applied Mathematical Modelling, 2016, 40(19/20): 8592-8604. |
30 | Claxton W, Liska J. Calculation of state of cure in rubber under variable time-temperature conditions[J]. Rubber Age, 1964, 95(2): 237-237. |
31 | 刘宇鹏. 不同硫化工艺条件对航空胎用天然橡胶性能的影响[D]. 哈尔滨: 哈尔滨工业大学, 2015. |
Liu Y P. Effects of vulcanization conditions on properties of natural rubber for aviation tires[D]. Harbin: Harbin Institute of Technology, 2015. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 494
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 652
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||