高韧性聚醚脲型苯并嗪树脂的合成及力学性能

doi:10.11949/j.issn.0438-1157.20160656

化工学报 ›› 2017, Vol. 68 ›› Issue (1): 385-390.DOI: 10.11949/j.issn.0438-1157.20160656

• 材料化学工程与纳米技术 • 上一篇下一篇

高韧性聚醚脲型苯并嗪树脂的合成及力学性能

袁伟, 钱莹, 史铁钧, 何涛, 陈杨

合肥工业大学化学与化工学院, 安徽合肥 230009

收稿日期:2016-05-11 修回日期:2016-10-14 出版日期:2017-01-05 发布日期:2017-01-05
通讯作者: 史铁钧
基金资助:
国家自然科学基金项目（51273054）。

Synthesis and mechanical properties of high toughness benzoxazine based on polyether-urea

YUAN Wei, QIAN Ying, SHI Tiejun, HE Tao, CHEN Yang

School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei 230009, Anhui, China

Received:2016-05-11 Revised:2016-10-14 Online:2017-01-05 Published:2017-01-05
Contact: 10.11949/j.issn.0438-1157.20160656
Supported by:
supported by the National Natural Science Foundation of China (51273054).

摘要/Abstract

摘要：

首先用端氨基聚醚、二苯甲烷二异氰酸酯（MDI）制备出两端含有氨基的聚醚型聚脲，然后用合成的聚醚型聚脲、双酚A和多聚甲醛为原料进行曼尼希反应合成出聚醚脲型苯并（口恶）嗪（PUBZ），经高温固化后形成韧性优良的树脂。用FTIR、¹H NMR分析了PUBZ的化学结构，证实了所得的目标产物；用DSC对PUBZ的固化特性进行研究；用拉伸测试分析了含不同长度聚醚链PUBZ树脂的力学性能；用DMA和TGA测试分析了含不同长度聚醚链PUBZ树脂的热性能。结果表明：聚醚链段越长，PUBZ的固化温度越高，PUBZ树脂的玻璃化转变温度越低，相反其热稳定性越好；在力学性能中端氨基聚醚D-400/PUBZ树脂的韧性最好。

关键词: 聚醚, 聚脲, 苯并嗪, 高韧性, 合成, 力学性能, 热稳定性

Abstract:

A new class of polyether-urea-based benzoxazine(PUBZ) exhibits perfect toughness properties after thermal treatment has been developed and synthesized via two steps.Firstly, amine-terminated polyether-based polyurea was synthesized using amine-terminated polyether and diphenyl methane diisocyanate(MDI) as raw materials.Secondly, PUBZ was prepared from amine-terminated polyether-based polyurea, bisphenol-A and paraformaldehyde through Mannich reaction.The structure of PUBZ has been confirmed by FTIR and ¹H NMR.The curing behavior was characterized by DSC.The effect of different length of polyether chains on the mechanical properties of PUBZ has been evaluated by dynamic mechanical analysis(DMA) in a tensile deformation.Thermal properties of PUBZ have been studied by DMA and thermogravimetric analysis(TGA).The results showed that the longer polyether chains, the higher curing temperature of the PUBZ.The lower glass transition temperature of the PUBZ, the better thermal stability.When the molecular weight of amine-terminated polyether was 400 and D-400/PUBZ resin exhibited the highest toughness.

Key words: polyether, polyurea, benzoxazine, high toughness, synthesis, mechanical property, thermal stability

中图分类号:

O631

袁伟, 钱莹, 史铁钧, 何涛, 陈杨. 高韧性聚醚脲型苯并嗪树脂的合成及力学性能[J]. 化工学报, 2017, 68(1): 385-390.

YUAN Wei, QIAN Ying, SHI Tiejun, HE Tao, CHEN Yang. Synthesis and mechanical properties of high toughness benzoxazine based on polyether-urea[J]. CIESC Journal, 2017, 68(1): 385-390.

参考文献 20

[1]	RAN Q C, TIAN Q, LI C, et al. Investigation of processing, thermal, and mechanical properties of a new composite matrix-benzoxazine containing aldehyde group[J]. Polymers for Advanced Technologies, 2010, 21(3):170-176.
[2]	SCHAFER H, ARNEBOLD A, STELTEN J, et al. Bifunctional benzoxazines:synthesis and polymerization of resorcinol based single isomers[J]. Journal of Polymer Science, 2015, 12:1-9.
[3]	ARDTANANTA H, WAHID M H, SASAKI M, et al. Performance enhancement of polybenzoxazine by hybridization with polysiloxane[J]. Polymer, 2008, 49:4585-4591.
[4]	LLIQADAS G, TUZUN A, RONDA J, et al. Polybenzoxazines:new players in the bio-based polymers arena[J]. Polymer Chemisty, 2014, 5:6636-44.
[5]	PATIL P N, RATH S K, SHARMA S K, et al. Free volumes and structural relaxations in diglycidyl ether of bisphenol-A based epoxy-polyether amine networks[J]. Soft Matter, 2013, 9:3589-3599.
[6]	HEIEH T H, KINLOCH A J, MASANIA K, et al. The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles[J]. Polymer, 2010, 51(26):6284-6294.
[7]	BROWN E N, KESSLER M R, SOTTOS N R, et al. In situ poly (urea-formaldehyde) microencapsulation of dicyclopentadiene[J]. Journal of Microencapsulation, 2003, 20(6):719-730.
[8]	YI J, BOYCE M C, LEE G F, et al. Large deformation rate-dependent stress-strain behavior of polyurea and polyurethanes[J]. Polymer, 2006, 47(1):319-329.
[9]	SAWARYN C, LANDFESTR K, TADEN A, et al. Advanced chemically induced phase separation in thermosets:polybenzoxazines toughened with multifunctional thermoplastic main-chain benzoxazine prepolymers[J]. Polymer, 2011, 52(15):3277-3287.
[10]	ZHAN Z J, HOLZWORTH K, NASSER S N. Milled glass reinforced polyurea composites:the effect of surface treatment[J]. Composite Materials and Joining, 2013, 7:35-38.
[11]	CHO H, RINALDI R G, BOYCE M C. Constitutive modeling of the rate-dependent resilient and dissipative large deformation behavior of a segmented copolymer polyuria[J]. Soft Matter, 2013, 9:6319-6330.
[12]	XU G M, SHI T J, LIU J H, et al. Preparation of a liquid benzoxanzine based on cardanol and the thermal stability of its graphene oxide composites[J]. Journal of Applied Polymer Science, 2014, 10:1-8.
[13]	TAKEICHI T, KANO T, AGAG T. Synthesis and thermal cure of high molecular weight polybenzoxazine precursors and the properties of the thermosets[J]. Polymer, 2005, 46:12172-12180.
[14]	AGAG T, GEIGER S, ALHASSAN S M, et al. Low-viscosity polyether-based main-chain benzoxazine polymers:precursors for flexible thermosetting polymers[J]. Macromolecules, 2010, 43:7122-7127.
[15]	ZHAO P, ZHOU Q, YUAN Y, et al. Reaction induced phase separation in thermosetting/thermosetting blends:effects of imidazole content on the phase separation of benzoxazine/epoxy blends[J]. RSC Advances, 2014, 4:61634-61642.
[16]	TAKEICHI T, THONGPRADITH S, HIRAI S, et al. Syntheses of novel benzoxazines having vinyl groups and thermal properties of the thermosets[J]. High Performance Polymers, 2012, 24:765-774.
[17]	TUZUN A, LIGADAS G, RONDA J C, et al. Integrating plant oils into thermally curable main-chain benzoxazine polymers via ADMET polymerization[J]. European Polymer Journal, 2015, 67:503-512.
[18]	JUBSILP C, TAKEICHI T, RIMDUSIT S, et al. Property enhancement of polybenzoxazine modified with dianhydride[J]. Polymer Degradation and Stability, 2011, 96:1047-1053.
[19]	RIMDUSIT S, PIRSTPINDVONG S. Toughening of polybenzoxazine by alloying with urethane prepolymer and flexible epoxy:a comparative study[J]. Polymer Engineering and Science, 2005, 45(3):288-2986.
[20]	LIU J, AGAG T, ISHIDA H. Main-chain benzoxazine oligomers:a new approach for resin transfer moldable neat benzoxazines for high performance applications[J]. Polymer, 2010, 51:5688-5694.

高韧性聚醚脲型苯并嗪树脂的合成及力学性能

Synthesis and mechanical properties of high toughness benzoxazine based on polyether-urea

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王琪, 张斌, 张晓昕, 武虎建, 战海涛, 王涛. 氯铝酸-三乙胺离子液体/P₂O₅催化合成伊索克酸和2-乙基蒽醌[J]. 化工学报, 2023, 74(S1): 245-249.
[2]	徐文杰, 贾献峰, 王际童, 乔文明, 凌立成, 王任平, 余子舰, 张寅旭. 有机硅/酚醛杂化气凝胶的制备和性能研究[J]. 化工学报, 2023, 74(8): 3572-3583.
[3]	杨菲菲, 赵世熙, 周维, 倪中海. Sn掺杂的In₂O₃催化CO₂选择性加氢制甲醇[J]. 化工学报, 2023, 74(8): 3366-3374.
[4]	涂玉明, 邵高燕, 陈健杰, 刘凤, 田世超, 周智勇, 任钟旗. 钙基催化剂的设计合成及应用研究进展[J]. 化工学报, 2023, 74(7): 2717-2734.
[5]	葛加丽, 管图祥, 邱新民, 吴健, 沈丽明, 暴宁钟. 垂直多孔碳包覆的FeF₃正极的构筑及储锂性能研究[J]. 化工学报, 2023, 74(7): 3058-3067.
[6]	刘杰, 吴立盛, 李锦锦, 罗正鸿, 周寅宁. 含乙烯基胺酯键聚醚类可逆交联聚合物的制备及性能研究[J]. 化工学报, 2023, 74(7): 3051-3057.
[7]	李彬, 徐正虎, 姜爽, 张天永. 双氧水催化氧化法清洁高效合成促进剂CBS[J]. 化工学报, 2023, 74(7): 2919-2925.
[8]	杨琴, 秦传鉴, 李明梓, 杨文晶, 赵卫杰, 刘虎. 用于柔性传感的双形状记忆MXene基水凝胶的制备及性能研究[J]. 化工学报, 2023, 74(6): 2699-2707.
[9]	张谭, 刘光, 李晋平, 孙予罕. Ru基氮还原电催化剂性能调控策略[J]. 化工学报, 2023, 74(6): 2264-2280.
[10]	葛泽峰, 吴雨青, 曾名迅, 查振婷, 马宇娜, 侯增辉, 张会岩. 灰化学成分对生物质气化特性的影响规律[J]. 化工学报, 2023, 74(5): 2136-2146.
[11]	刘润竹, 储甜甜, 张孝阿, 王成忠, 张军营. α，ω-端羟基亚苯基氟硅聚合物的合成及性能[J]. 化工学报, 2023, 74(3): 1360-1369.
[12]	王帅, 杨富凯, 徐新宇. 阻燃型全生物基多元醇聚氨酯泡沫的制备及性能研究[J]. 化工学报, 2023, 74(3): 1399-1408.
[13]	王锋, 陈钰, 裴鸿艳, 刘东东, 张静, 张立新. 1，2，4-𫫇二唑类衍生物的设计、合成及抗菌活性[J]. 化工学报, 2023, 74(3): 1390-1398.
[14]	刘海芹, 李博文, 凌喆, 刘亮, 俞娟, 范一民, 勇强. 羟基-炔点击化学改性半乳甘露聚糖薄膜的制备及性能研究[J]. 化工学报, 2023, 74(3): 1370-1378.
[15]	赵亚静, 胡激江, 介素云, 李伯耿. HTPB引入方式对不饱和树脂改性效果的影响[J]. 化工学报, 2023, 74(2): 883-892.