化工学报 ›› 2014, Vol. 65 ›› Issue (4): 1517-1525.DOI: 10.3969/j.issn.0438-1157.2014.04.049

• 材料化学工程与纳米技术 • 上一篇    下一篇

超疏水PET织物的制备及其抗菌性能

刘云鸿1,2, 李光吉1, 陈超1, 彭新艳1,2, 王立莹1, 陈志锋1   

  1. 1 华南理工大学材料科学与工程学院, 广东 广州 510640;
    2 佛山市高明区(中国科学院)新材料专业中心, 广东 佛山 528000
  • 收稿日期:2013-07-25 修回日期:2013-12-25 出版日期:2014-04-05 发布日期:2013-12-31
  • 通讯作者: 李光吉
  • 作者简介:刘云鸿(1986—),男,博士研究生。

Preparation and antibacterial activity of superhydrophobic PET fabric

LIU Yunhong1,2, LI Guangji1, CHEN Chao1, PENG Xinyan1,2, WANG Liying1, CHEN Zhifeng1   

  1. 1 School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China;
    2 Center of New Materials of Gaoming District, Foshan City (Chinese Academy of Sciences), Foshan 528000, Guangdong, China
  • Received:2013-07-25 Revised:2013-12-25 Online:2014-04-05 Published:2013-12-31

摘要: 纺织物表面的超疏水特性将赋予其优异的自清洁性能。以PET无纺布为基材,探索了利用溶胶-凝胶法在预处理后的PET织物表面构筑具有微纳结构的超疏水涂层的方法;并利用扫描电镜(SEM)、接触角测量仪表征了改性PET织物表面的微观结构和润湿性。进一步地,分别以大肠杆菌和金黄色葡萄球菌为试验菌株,通过细菌转移法和抑菌圈法评价与分析了改性PET织物表面的抗菌性能。研究表明:利用改进的Stöber溶胶-凝胶过程能够在经碱减量法预处理的PET表面原位形成SiO2纳米粒子;再用含疏水性长链的十二烷基硅烷对这一表面进行改性,并经过表面热处理,就能够成功地在PET织物表面构筑多层次的微/纳结构,从而制得表面具有超疏水特性的PET织物,其接触角可达到163°。这一超疏水PET织物能够抑制细菌在其表面的生长繁殖,表现出了明显的抗菌特性。

关键词: PET织物, 超疏水表面, 纳米技术, 二氧化硅, 溶胶-凝胶法, 抗菌性能

Abstract: The textile fabric possessing superhydrophobic surface can exhibit excellent self-cleaning performance. In this work, PET nonwoven fabric was used as substrate and a route to fabricating superhydrophobic coating possessing hierarchical micro/nano structures with a sol-gel method on the pretreated PET fabric surface was explored. The microstructure and wettability of the modified PET fabric surfaces were characterized with SEM and water contact angle measurement. Furthermore, the antibacterial activities of the modified PET fabric against E. coli and S. aureus were evaluated and analyzed via the bacterial transfer method and the inhibition zone test, respectively. The results indicated that the hierarchical micro/nano structures could be successfully constructed on the PET fabric surface by the in-situ formation of SiO2 nanoparticles on the alkali-treated PET fabric surface, which was conducted via the modified Stöber sol-gel process, and the subsequent surface modification with n-dodecyltrimethoxysilane (DTMS) bearing long hydrophobic chain followed by appropriate heat treatment. The as-prepared PET fabric surface could exhibit superhydrophobicity with a water contact angle of 163°. Besides, the prepared superhydrophobic PET fabric could suppress bacterial growth and reproduction on its surface, thus showing obvious antibacterial activity.

Key words: PET fabric, superhydrophobic surface, nanotechnology, silica, sol-gel method, antibacterial activity

中图分类号: