液相流动方式对波纹规整填料性能的影响

doi:10.3969/j.issn.0438-1157.2014.12.016

化工学报 ›› 2014, Vol. 65 ›› Issue (12): 4760-4766.DOI: 10.3969/j.issn.0438-1157.2014.12.016

液相流动方式对波纹规整填料性能的影响

李洪^1,2,3, 姚跃宾¹, 王方舟¹, 高鑫^1,2,3, 李鑫钢^1,2,3

1. 天津大学化工学院, 天津 300072;
2. 精馏技术国家工程研究中心, 天津 300072;
3. 天津化学化工协同创新中心, 天津 300072

收稿日期:2014-04-16 修回日期:2014-07-07 出版日期:2014-12-05 发布日期:2014-12-05
通讯作者: 高鑫
基金资助:
长江学者和创新团队发展计划项目(IRT0936);国家自然科学基金项目(21176172,21336007).

Effect of liquid flow behaviour on performance of corrugated structured packing

LI Hong^1,2,3, YAO Yuebin¹, WANG Fangzhou¹, GAO Xin^1,2,3, LI Xingang^1,2,3

1. School of Chemical Engineering, Tianjin University, Tianjin 300072, China;
2. National Engineering Research Center of Distillation Technology, Tianjin 300072, China;
3. Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin 300072, China

Received:2014-04-16 Revised:2014-07-07 Online:2014-12-05 Published:2014-12-05
Supported by:
supported by the Program for Changjiang Scholars and Innovative Research Team in University (IRT0936) and the National Natural Science Foundation of China (21176172, 21336007).

摘要/Abstract

摘要： 根据液相在波纹规整填料片上呈现渗流、膜状流等不同的流动方式,选择5种不同的波纹规整填料对其流体力学和传质性能进行研究,以探究液相在波纹片上的流动方式对波纹规整填料性能的影响.研究结果表明,液相呈渗流流动的泡沫碳化硅波纹规整填料(SCFP型)有利于液体横向扩散和液膜均匀分布,当液相喷淋密度和气相F因子均较小时,其压降最低,传质效率最高;液相主要呈渗流流动、兼有膜状流动的双层错孔丝网填料(DMⅢ型)有利于波纹片两侧液体交换,强化液体在流动过程中的扰动,其压降及传质性能略逊于SCFP型填料;液相主要呈膜状流动的BX型、DMⅠ型及DMⅡ型填料波纹片表面液膜较厚,横向扩散能力差,其传质效率低于SCFP型和DMⅢ型填料.研究揭示了依靠渗流作用的波纹规整填料具有较好的应用性能,为波纹规整填料的进一步发展开拓了新思路.

关键词: 规整填料, 流动方式, 渗流, 蒸馏, 流体动力学, 传质

Abstract: Five corrugated structured packings are selected based on different liquid flow patterns including seepage flow and film flow. The hydrodynamic and mass transfer performance are studied in order to explore the effect of liquid flow patterns on the performance of structured packings. The experimental results show that liquid mainly presents a seepage flow in the porous structure of SCFP type packing, which benefits the lateral spreading of liquid and uniform distribution of liquid membrane. The SCFP type packing shows the highest mass transfer efficiency and lowest pressure drop when the F factor is lower. Liquid displays a partly seepage flow in the special structure of DMⅢ type packing, which can promote the liquid exchange between two sides of one sheet and intensify liquid turbulence, increasing mass transfer efficiency and reducing pressure drop compared with DMⅠand DMⅡtype structured packings. Liquid flows in the form of film on the surface of BX and DMⅠtype packings and this flow pattern results in a high velocity and a short residence time of liquid film. Thus the mass transfer efficiency of BX and DMⅠtype packings is lower than that of SCFP and DMⅢ type packings. This study shows that the structured corrugated packing with seepage flow presents good performance, opening up a new method to develop structured corrugated packings.

Key words: structured packing, flow pattern, seepage flow, distillation, hydrodynamics, mass transfer

中图分类号:

TQ02

李洪, 姚跃宾, 王方舟, 高鑫, 李鑫钢. 液相流动方式对波纹规整填料性能的影响[J]. 化工学报, 2014, 65(12): 4760-4766.

LI Hong, YAO Yuebin, WANG Fangzhou, GAO Xin, LI Xingang. Effect of liquid flow behaviour on performance of corrugated structured packing[J]. CIESC Journal, 2014, 65(12): 4760-4766.

参考文献 16

[1]	Li Xingang (李鑫钢), et al. Energy Saving and Intensification Technologies for Distillation Process (蒸馏过程节能与强化技术) [M]. Beijing: Chemical Industry Press, 2011: 203
[2]	Cihla Z, Schmidt O. Behavior of liquids flowing through the packing of a cylinder column [J]. Coll. Czech. Chem. Colmm., 1957, 22: 896-907
[3]	Olujic Z, Seibert A F, Fair J R. Influence of corrugation geometry on the performance of structured packings: an experimental study [J]. Chem. Eng. Process., 2000, 39 (4): 335-342
[4]	Xu Chongsi (徐崇嗣), Lou Jianzhong (楼建中), Jiang Qingquan (姜庆泉). Study on the liquid distribution of metal corrugated sheet packing [J]. Journal of Chemical Industry and Engineering (China) (化工学报), 1986, 37 (4): 402-411
[5]	Qiu Junhong (裘俊红), Chen Guobiao (陈国标), Xu Jianbing (许建炳). Liquid distribution in corrugated sheet structured packed column [J]. Journal of Chemical Industry and Engineering (China) (化工学报), 2003, 54 (5): 646-652
[6]	Patiencea G S, Cenni R. Formaldehyde process intensification through gas heat capacity [J]. Chem. Eng. Sci., 2007, 62 (18/19/20): 5609-5612
[7]	Nigam K D P, Larachi F. Process intensification in trickle-bed reactors [J]. Chem. Eng. Sci., 2005, 60 (22): 5880-5894
[8]	Petre C F, Larachi F, Iliuta I, Grandjean B P A. Pressure drop through structured packings: breakdown into the contributing mechanisms by CFD modeling [J]. Chem. Eng. Sci., 2003, 58 (1): 163-177
[9]	Woerlee G F, Berends J, Olujic Z, de Graauw J. A comprehensive model for the pressure drops in vertical pipes and packed columns [J]. Chem. Eng. J., 2001, 84 (3): 367-379
[10]	Verschoof H J, Olujic Z, Fair J R. A general correlation for predicting the loading point of corrugated sheet structured packings [J]. Ind. Eng. Chem. Res., 1999, 38 (10): 3663-3669
[11]	Oluji? Z, Kamerbeek A B, de Graauw J. A corrugation geometry based model for efficiency of structured distillation packing [J]. Chem. Eng. Process., 1999, 38 (4/5/6): 683-695
[12]	Oluji? Z, Seibert A F, Kaibel B, Jansen H, Rietfort T, Zich E. Performance characteristics of a new high capacity structured packing [J]. Chem. Eng. Process., 2003, 42 (1): 55-60
[13]	Meier W. The applications of Sulzer structured packing [J]. Sulzer Technical Review, 1970, 52 ( 3): 147-153
[14]	Chen Dachang (陈大昌), Lu Lisheng (卢励生), Ye Chubao (叶楚宝). An investigation on fluid dynamics and characteristic of mass transfer in corrugated packing made of two layers of stainless steel gauze [J]. Journal of Chemical Industry and Engineering (China) (化工学报), 1981, 32 (2): 151-156
[15]	Li X G, Gao G H, Zhang L H, Sui H, Li H, Gao X, Yang Z M, Tian C, Zhang J S. Multiscale simulation and experimental study of novel SiC structured packings [J]. Ind. Eng. Chem. Res., 2012, 51 (2): 915-924
[16]	Wang Fangzhou (王方舟). Research on fluid phenomena in the foam structured packing corrugated sheet [D].Tianjin: Tianjin University, 2013

液相流动方式对波纹规整填料性能的影响

Effect of liquid flow behaviour on performance of corrugated structured packing

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 16

相关文章 15

编辑推荐

Metrics

本文评价

[1]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[2]	肖明堃, 杨光, 黄永华, 吴静怡. 浸没孔液氧气泡动力学数值研究[J]. 化工学报, 2023, 74(S1): 87-95.
[3]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[4]	杨越, 张丹, 郑巨淦, 涂茂萍, 杨庆忠. NaCl水溶液喷射闪蒸-掺混蒸发的实验研究[J]. 化工学报, 2023, 74(8): 3279-3291.
[5]	何宣志, 何永清, 闻桂叶, 焦凤. 磁液液滴颈部自相似破裂行为[J]. 化工学报, 2023, 74(7): 2889-2897.
[6]	张媛媛, 曲江源, 苏欣欣, 杨静, 张锴. 循环流化床燃煤机组SNCR脱硝过程气液传质和反应特性[J]. 化工学报, 2023, 74(6): 2404-2415.
[7]	刘尚豪, 贾胜坤, 罗祎青, 袁希钢. 基于梯度提升决策树的三组元精馏流程结构最优化[J]. 化工学报, 2023, 74(5): 2075-2087.
[8]	王皓, 唐思扬, 钟山, 梁斌. MEA吸收CO₂富液解吸过程中固体颗粒表面的强化作用分析[J]. 化工学报, 2023, 74(4): 1539-1548.
[9]	贾露凡, 王艺颖, 董钰漫, 李沁园, 谢鑫, 苑昊, 孟涛. 微流控双水相贴壁液滴流动强化酶促反应研究[J]. 化工学报, 2023, 74(3): 1239-1246.
[10]	钱志广, 樊越, 王世学, 岳利可, 王金山, 朱禹. 吹扫条件对PEMFC阻抗弛豫现象和低温启动的影响[J]. 化工学报, 2023, 74(3): 1286-1293.
[11]	何洋, 高森虎, 吴青云, 张明理, 龙涛, 牛佩, 高景辉, 孟颖琪. 析湿工况下平直开缝翅片传热传质特性的数值研究[J]. 化工学报, 2023, 74(3): 1073-1081.
[12]	张伟政, 赵吉军, 马学忠, 张琦璇, 庞益祥, 张俊涛. 湍流效应对高速机械密封端面型槽冷却性能影响分析[J]. 化工学报, 2023, 74(3): 1228-1238.
[13]	袁海鸥, 叶方俊, 张硕, 罗祎青, 袁希钢. 考虑中间换热器的能量集成精馏序列合成[J]. 化工学报, 2023, 74(2): 796-806.
[14]	何万媛, 陈一宇, 朱春英, 付涛涛, 高习群, 马友光. 阵列凸起微通道内气液两相传质特性研究[J]. 化工学报, 2023, 74(2): 690-697.
[15]	张浩, 王子悦, 程钰洁, 何晓辉, 纪红兵. 单原子催化剂规模化制备的研究进展[J]. 化工学报, 2023, 74(1): 276-289.